Content |
The BS-678B, is made of wood and can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678B have a built-in attenuator and can be connected to a 2-wire or 3-wire system.
Rated Input | 6 W (100 V line), 3 W (70 V line) | Rated Impedance | 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W) 0 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W) | Sensitivity | 94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise) | Frequency Response | 150 Hz - 20 kHz (peak -20 dB) | Speaker Component | 16 cm (6“) double cone-type | Applicable Cable | 600 V vinyl-insulated cable (IV wire or HIV wire olid wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)7-core twisted wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16) | Connection | Push-in connector (bridging terminal) | Attenuation | OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB) | Finish Baffle: | Baffle: HIPS, white (RAL 9010 or equivalent color)Cabinet: Particle board with pvc sheet, white (RAL 9010 or equivalent olor)Grille: Surface-treated steel plate net, black (RAL 9010 or quivalent color) | Dimensions | 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“(excluding volume control knob) | Weight | 1.7 kg (3.75 lb) | Accessory | Speaker mounting screw (4 × 35 (0.16" × 1.38“)) …2 |
|
- 55 Hz to 15 kHz frequency range (-10 dB)
- 175 watts continuous program power capacity
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 2.8 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
- Net Weight: 6.3 kg (14 lb)
|
BS-1030B and BS-1030W Music/Paging Speakers
The TOA BS-1030 Music/Paging Speaker has exceptional sound quality and value for a wide variety of applications. Available in black and white, the versatile BS-1030 is designed for both indoor and outdoor use with a durable ABS resin enclosure and steel mesh grille. The two-way, bass-reflex design features a 4.72" (12 cm) cone woofer, 1" (2.5 cm) dome tweeter and built-in multi-tap transformer with screwdriver-adjustable power taps. A transformer bypass setting allows direct 8-ohm operation. Installation is fast and easy with the supplied mounting bracket or rear panel keyholes for horizontal or vertical surface-mounting. The BS-1030 speakers are backed with a five year warranty.
Also see the new FB-100 and HB-1 Subwoofers.
FEATURES:
Indoor and Outdoor Applications Mounting Bracket Included Paintable Enclosure Two-Way, Bass-Reflex Design 70.7/100 V and 8-Ohm Screwdriver-Adjustable Tap Settings Black (BS-1030B) and White (BS-1030W) |
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
| Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.
BS-634 |
| Speaker Component: | 5" (12cm) Cone-type | Impedance: | 100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W), | Sensitivity: | (1w 1m) 90dB | Frequency Responce: | 120 -20,000Hz | Input Terminal: | Push-in terminal | Finish: | Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable | Dimensions: | 320(W)x200(H)x85(D)mm |
|
Reviews
There are no reviews yet.