| Content |
The BS-678BT, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678BT have a built-in attenuator and can be connected to a 2-wire or 3-wire system.
SPECIFICATIONS:
| Rated Input | 6 W (100 V line), 3 W (70 V line) |
|---|
| Rated Impedance | 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W) 0 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W) | | Sensitivity | 94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise) | | Frequency Response | 150 Hz - 20 kHz (peak -20 dB) | | Speaker Component | 16 cm (6“) double cone-type | | Applicable Cable | 600 V vinyl-insulated cable (IV wire or HIV wire olid wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)7-core twisted wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16) | | Connection | Push-in connector (bridging terminal) | | Attenuation | OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB) | | Finish Baffle: | Baffle: HIPS, off-white (RAL 9010 or equivalent color)Cabinet: Particle board with pvc sheet, off-white (RAL 9010 or equivalent color)Grille: Surface-treated steel plate net, off-white(RAL 9010 or equivalent color) | | Dimensions | 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“(excluding volume control knob) | | Weight | 1.7 kg (3.75 lb) | | Accessory | Speaker mounting screw (4 × 35 (0.16" × 1.38“)) …2 |
|
- 55 Hz to 15 kHz frequency range (-10 dB)
- 175 watts continuous program power capacity
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 2.8 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
- Net Weight: 6.3 kg (14 lb)
|
The F-2000 Series Speaker are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application. The F-2000WTWP features a water-proof design (splash-proof type meeting IPX4 standard), so that it can be permanently installed outdoors.
| Enclosure | Bass-reflex type | | Rated Input | 60 W | | Rated Impedance | 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W) | | Sensitivity | 92 dB (1 W, 1 m) at installation in 1/2 free sound field
93 dB (1 W, 1 m) at installation in 1/2 free sound field (with horn adapter) | | Frequency Response | 65 - 20,000 Hz, -10 dB at installation in 1/2 free sound field | | Crossover Frequency | 2.5 kHz | | Directivity Angle | Horizontal: 110゜, Vertical: 100゜ Horizontal: 80゜, Vertical: 80゜ (with horn adapter) | | Speaker Component | Low frequency: 20 cm (8) cone-type High frequency: 25 mm (1“) dome tweeter“ | | Input Terminal | Push-in terminal | | Water Protection | IPX4 | | Operating Temperature | -10℃ to +50℃ (14゜F to 122゜F) | | Finish | Enclosure: HIPS, white
Punched net: Surface-treated steel plate, white, anticorrosive paint
Joint bracket, wall bracket: Stainless steel (SUS304), t2.0
Speaker bracket: Die-cast aluminum, white, paint | | Dimensions | 244 (W) × 373 (H) × 235 (D) mm (9.61 × 14.69" × 9.25“)“ | | Weight | 7.4 kg (16.31 lb) (including the supplied brackets) | | Accessory | Speaker bracket …1, Joint bracket …1, Wall bracket …1, Bracket fixing screw … 1 set,
Horn adapter …1, Horn adapter mounting screw …4, Terminal cover …1,
Terminal cover mounting screw …4 | | Option | Speaker mount bracket: SP-131, YS-60B |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
| BS-33AT | | | Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | | Sensitivity: | (1W, 1m): 91dB | | Frequency Response: | 120 – 15,000Hz (–20dB) | | Speaker Component: | 5" (12cm) cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | | Finish: | Case: ABS resin, off-white | | Rear bord: | Hard board | | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | | Wall Mounting Case front mount: | 184mm (7.24“) | | Dimensions: | Fixing hole mount: 120mm (4.72“) | | Weight: | 810g (1.79 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
The BS-678 is a double-cone type speaker with a wooden cabinet that has a stylish, compact and unobtrusive design and that delivers highly cost effective performance. A push-in type input connector allows easy cable connections and bridge wiring. The selectable input impedance can be easily adjusted by changing the tap position
of the unitʼs transformer. 6" (16cm) double cone speaker unit ensures high-quality sound, making the BS-678 ideal for BGM and announcement applications. It can be installed in either a horizontal or a vertical orientation. Its structure permits direct wall installation with screws, making the speaker unit resistant to falling even if outward force is applied to it.
• Stylish, compact and unobtrusive design
• Quick and easy installation
• High cost-effectiveness
• Horizontal / vertical installation
• Ideally suited for BGM and announcements
| BS-678 |
|---|
| Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ(1.5W),13kΩ (0.8W) 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ(0.8W),13kΩ (0.4W) | | Sensitivity | (1W, 1m): 94dB (500 – 5,000Hz, pink noise) | | Frequency Response: | 150 – 20,000Hz (peak –20dB) | | Speaker Component: | 6" (16cm) double cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2(equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Finish: Baffle: | HIPS resin, off-white (RAL 9010 or equivalent colour) | | Cabinet: | Particle board with pvc sheet, off-white(RAL 9010 or equivalent colour) | | Grille: | Surface-treated steel plate net, off-white(RAL 9010 or equivalent colour) | | Dimensions: | 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“) | | Weight: | 1.7kg (3.75 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" × 1.38“)) × 2 |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
| SPECIFICATIONS |
|
|---|
| BS-633A | | | Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W) | | Sensitivity | (1W, 1m): 91dB | | Frequency Response: | 120 – 15,000Hz (–20dB) | | Speaker Component: | 5" (12cm) cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | | Finish: | Case: ABS resin, off-white | | Rear bord: | Hard board | | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) | | Wall Mounting Case front mount: | 184mm (7.24“) | | Dimensions: | Fixing hole mount: 120mm (4.72“) | | Weight: | 780g (1.72 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2 |
|
Reviews
There are no reviews yet.