| Description | |
- ECC81/12AT7-CZ
- Premium Selected
- Optimised for use as a balanced phase driver
- Also provides powerful amplification, which ideally meets the special requirements as a driver tube for the improved dynamics of the output stage
|
- ECC81/12AT7-CZ
- Premium Selected
- Optimised for use as a balanced phase driver
- Also provides powerful amplification, which ideally meets the special requirements as a driver tube for the improved dynamics of the output stage
|
- Applications: pre-amplification, Reverb
- Type: Double triode
- Origin: Russia
- Quality: Replacement tube having exactly the same characteristics as the originals.
- High quality tube
| |
- Very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness.
- Selected and recommended for guitar amps to improve overall response.
- Best for clean tones as well as for those deep-bass required for modern preamps.
- The TAD 12AX7A-C became the 1st choice for Boogie®, Brunetti®, Diezel® , Engl®, Fender®, Hughes & Kettner®, Koch®, Laney®, Marshall®, Soldano®, Trace Elliot® and so many more.
|
| Content | 6L6GC-STR BLACKPLATE RCA-Style TAD PREMIUM Selected
The Classic 6L6 Sound - Excellent Tone and Maximum Lifetime!
TAD has the remakes of the all time favorite 6L6 classics by RCA and GE. The TAD 6L6GC-STR is your perfect choice if you are up for the sound of the rock legends. It provides the low end with the right amount of pressure, as known from the famous RCA tubes. It has clear, transparent but unobstrusive highs and exactly the right bite to provide you with all those classic 6L6 sounds from big warm cleans to modern hard rock sounds.
This TAD 6L6GC-STR combines the famous reliability of the american made Philips/Sylvania STR series (also known as MESA 6L6GC-STR415) with the black-plate system of the highly regarded vintage RCA 6L6GC tubes. We joined best of both worlds! Silky top end, combined with deep bass response and lots of headroom make this tube a living classic. Our choice for lively clean sounds and powerful broadband multichannel amps.
All power tubes labeled Premium Selected have passed the following tests:
- Plate Current (PC) and Amplification (TC)
- Low Noise Test
- Microphonic Test
- Sonic Tests
- Shock Tests
- Listening Tests
- Shorts & Leakage Tests
Premium RT-Matching of Power Tubes
Our Premium Matching is an exact matching of power tubes with identical Plate Current (PC) and Transconductance (TC).
TAD Premium Selected tubes are guaranteed for a period of 6 months (according to terms of warranties) for the quality criteria mentioned above.
| Tube Type: |
6L6/5881 |
| Socket: |
Octal(8Pin) |
| Selection: |
Premium |
| Product information "ECC81 / 12AT7-Cz TAD Premium Selected (balanced)"
The TAD ECC81 / 12AT7-Cz is selected with regards to a tight balance of both triodes making it ideal for the use as BALANCED PHASE DRIVER. In addition to the perfect symmetrical systems, the strong amplification characteristics of the TAD ECC81 / 12AT7-Cz support increased dynamics of the output stage when used as phase driver or phase inverter tube.
All preamp tubes labeled Premium Selected have passed the following tests:
- Low Noise Test
- Microphonic Test
- Gain Test
- Sonic Tests
- Shock Tests
- Listening Tests
- Balanced Output Test
Matching and Selecting Options for Preamp Tubes
Matching in Pairs for preamp tubes means that two tubes show identical gain, hence, four characteristically identical systems.
This matching method includes our Balance-Selection. We highly recommend this matching method for hi-fi systems.
TAD Premium Selected/Highgrade tubes are guaranteed for a period of 6 months (according to terms of warranties)
for the quality criteria mentioned above.
| Tube Type: |
12AT7/ECC81/6201 |
| Socket: |
Noval(9 Pin) |
| Selection: |
Premium |
| The JJ ECC81 / 12AT7 tube is a low noise and low microphonic preamp tube. A good choice for phase inverters and reverb circuits calling for 12AT7 tubes.
- 9 pin miniature preamp tube (amplification factor = 60),
- Less gain than a 12AX7
- Preferred by blues and jazz guitarists alike
| Socket: |
Noval(9 Pin) |
| Tube Type: |
12AT7/ECC81/6201 |
|
Made in Russia
The 6922 is used world wide in high end personal stereo systems; especially there, where value is placed on sound quality without compromise.
- Excellent E88C, EH 6922, 6DJ8W choice for HiFi
- Also suitable for guitar amp circuits
- ECC88 equivalent
| Tube Type: |
6922/ECC88/E88CC |
| Socket: |
Noval(9 Pin) |
| GROOVE TUBES GT 12AT7 PREAMP TUBE
The Groove Tubes GT-12AT7 preamp tube is manufactured to the highest quality JAN spec. NOS, made in Russia for extremely long life.
Used widely in most U.S.-made amps and, in particular, Fender amps. Fender amps with reverb use 2 - 12AT7s -- one for the reverb drive stage, and one as a phase inverter to drive the push/pull output stage. The makeup of the 12AT7 is very similar to the 12AX7 and it can be substituted for a 12AX7 in a pinch. Some players prefer the 12AT7 in the driver stage of a Marshall for a cleaner, brighter tone. (The driver or phase inverter is the 12AX7 located nearest the power tubes.) The 12AT7 is rarely used in a tone-generating stage, but rather in function stages, so the Groove Tubes GT-12AT7 is selected for durability.
Country of origin: Russia | E88C Siemens gold pins tube CCa Triode, 32221 Code for driver stages, preamplifiers, ham radio, hi-fi, hi-end, power amplifier, pre-Amp vintage stereo, push-pull vacum tubes.
Having precise imaging and a detailed top end, the Siemens E88CC / 6922 Gold Pin is very similar to the Telefunken E88CC / 6922 in overall tone.
New and in original boxes, we like this tube a lot for everything from classical and jazz to rock.
Really a versatile tube.
|
Reviews
There are no reviews yet.