Content |
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP56 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new performance standards in a number of critical fields.
Yamaha\'s new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.
-
High power subwoofer.
-
Dual woofers can be switched for discrete drive (IS1215 and IS1218).
-
Twelve 10mm-screw suspension points (M10) provided for flexible rigging.
-
Durable black or white finish (can be painted to match any interior).
-
Optional matching array frame available (for IS1118 and 1218 only).
-
Parallel-wired Neutrik NL4 and barrier strip connectors.
Drive Mode |
Parallell/Discrete |
Frequency Range (-10 dB) |
40 Hz-2.5 kHz |
Power Rating (Parallel) |
NOISE: 1400W; PGM: 2800W; MAX: 5600W |
Power Rating (Discrete) |
NOISE: 700W x 2; PGM: 1400W x 2; MAX: 2800W x 2 |
Nominal Impedance |
Parallel: 4 ohms; Discrete: 2 x 8 ohms |
Sensitivity (1 W@1 m) SPL |
Parallel: 97dB; Discrete: 100dB |
Calculated Peak SPL |
Parallel: 134dB; Discrete: 134dB |
Calculated Continuous SPL |
Parallel: 128dB; Discrete: 128 B |
Components |
2x 15" woofer, 4" voice coil |
Shape |
Rectangular |
Material |
3/4 inch (19 mm), 13-ply Finish Birch (Baffle and Inner Wall), 5/8 inch (16 mm), 11-ply Finish Birch |
Grill |
16 gauge powder coated perforated steel grilles, backed w/ acoustically transparent reticulated foam |
Connectors |
1 x Neutrik NL4 and barrier strip, wired in parallel |
Flying Hardware |
12 x M10 for shoulder eyebolts |
Handle |
Four |
Dimensions (H x W x D) |
34.8" (883 mm) x 17.6" (448 mm) x 24" (610 mm) |
Weight |
139 lbs (63 kg) |
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
|
2x15''
800W/3200W Peak
133dB SPL max
4 Ohm
40Hz-125/250Hz
schwarz
| JBL VRX 918S 18'' 1600W power rating continuous, High Power Flying passive Subwoofer
Key Features :
Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame.
18 inch, 2268H Differential Drive? woofer for extended low-frequency output
Large port area for reduced distortion
20 mm threaded pole socket for solid, secure satellite speaker mounting
Specifications:
|
|
|
Frequency Range |
: |
31 Hz ? 220 Hz |
Frequency Response |
: |
34 Hz ? 220 Hz |
Recommended Crossover Frequencies |
: |
80 Hz, 24 dB / octave HPF
80 Hz, 24 dB / octave LPF |
Power Rating (Continuous / Program / Peak) |
: |
800 W / 1600 W / 3200 W |
System Maximum SPL |
: |
130 dB SPL peak |
System Sensitivity |
: |
95 dB SPL |
LF Driver |
: |
1 x JBL 2268H 457 mm (18 in) Differential Drive woofer |
Nominal Impedance |
: |
8 ohms |
Active Tunings |
: |
Tunings available at www.jblpro.com |
Enclosure |
: |
Rectangular, 18 mm, 13-ply birch plywood |
Suspension / Mounting |
: |
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit |
Finish |
: |
Black DuraFlex? finish |
Grille |
: |
Powder coated, black, 16-gauge perforated steel with
acoustical transparent charcoal foam backing. |
Input Connectors |
: |
Neutrik? Speakon? NL-4 (x2) |
Dimensions (H x W x D) |
: |
508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in) |
Net Weight |
: |
37 kg (81 lb) |
Optional Accessories |
: |
SRX718S-CVR: Pull-over padded cover
SS4-BK: Adjustable, heavy-duty pole, M20 thread to
35 mm
WK-4: Caster kit
VRX-AF: Array Frame Kit
M-10 eyebolt kit |
|
SPECIFICATIONS
- Woofer: 15” AA PA15000, aluminum basket, 100mm Voicecoil
- Power Handling
450W continuous
900W program
1800W peak
- Recommended input power: 300-600 W @ 8Ohm
- Components: 15” Long excursion woofer
- Sensitivity (Half Space):
102dB SPL
135dB Peak
- Freq. response: (-3dB): 45Hz - 200Hz
- Freq. range(-10dB): 40Hz - 250Hz
- Impedance: 8Ohm
- Finish: black structure paint
- Protective Grid: powder coated steel grill with acoustic foam
- Connector: 2x NL4 Speaker
- Handle: 2 handles on the sides
- Pole mount: integrated (M20)
- Cabinet: plywood
- Dimensions (LxWxH): 430x550x550mm
- Weight: 26,5kg
FEATURE OVERVIEW
- Perfect harmonized components and case details
- High efficiency
- First class mechanical manufacture for day-to-day operations
- Equipped with optimized 15” LF driver
- Large optional accessory range
- Ideal for mobile and install applications
|
Reviews
There are no reviews yet.