TOA N-8000RS Sub Station Interface Unit

3,100.86 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: N-8000RS Category:
The N-8000RS is a Sub-station interface unit designed for use with TOA’s packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Up to 16 sub-stations can be connected using 2-core shielded cables. The number of LAN-connected N-8000 system components such as the N-8000RS and IP intercom exchanges is 192 maximum in […]

 

Read more

The N-8000RS is a Sub-station interface unit designed for use with TOA’s packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Up to 16 sub-stations can be connected using 2-core shielded cables. The number of LAN-connected N-8000 system components such as the N-8000RS and IP intercom exchanges is 192 maximum in total. Connecting the unit to the LAN permits the sub-station to receive paging calls and make calls to both the master station connected to the IP intercom exchange and the IP master station. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.

Specification
Power Source 220 – 240 V AC, 50/60 Hz
Power Consumption 40 W (at rated), 50 W (max.)
Interface Section for Sub-station Number of lines: 16 lines
Number of speech link: 2 links
Transmission system: Analog baseband
Transmission range: 500 m (546.81 yd)/φ0.5 mm (AWG24), 800 m (874.89 yd)/
Speech method: Half-duplex conversation by way of voice switch,
Connector: Removable terminal block (3 pins)
Wiring method: Two-core shielded cable
Audio output: Conversation: Max. 1 W, Paging: Max. 0.5 W/line
Feeding voltage/current: 22 V DC, 30 mA max.
Control signal: Call in button detection, privacy button detection, hook detection
Network Section Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (Speech: 2 links, Paging: Max. 8 zones)
Connector: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16-bit
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Indication Network LNK/ACT indication, Status lamp, Power-on indication lamp
Other Firmware update function, System data hold function, Reset switch (front panel)
Setting Method Rack, Desk, Surface mount
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 90 %RH or less (no condensation)
Finish Pre-coated steel plate, black, 30 % gloss
Dimensions 420 (W) × 44.3 (H) × 325.5 (D) mm (16.54″ × 1.74″ × 12.81“)
Weight 3.9 kg (8.6 lb)
Accessory Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (3 pins)…16, Plastic foot…4, Screw for fitting plastic foot…4,
Rack mounting bracket…2, Screw for mounting bracket…8, Screw for rack mounting…4
Option Wall mounting bracket: YC-850

 

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “TOA N-8000RS Sub Station Interface Unit”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA N-8000RS Sub Station Interface Unit removeTOA N-8020MS Industrial-Use Master Station removeTOA N-8010MS Standard Master Station removeBaofeng UV-5RA UHF/VHF Wireless Walkie Talkie Transceiver 4W/1W FM removeTOA N-8011MS Standard Hands-Free Master Station removeARTSOUND RL-9909 Intercom System for Counter Dual-Way Customer and Employee remove
NameTOA N-8000RS Sub Station Interface Unit removeTOA N-8020MS Industrial-Use Master Station removeTOA N-8010MS Standard Master Station removeBaofeng UV-5RA UHF/VHF Wireless Walkie Talkie Transceiver 4W/1W FM removeTOA N-8011MS Standard Hands-Free Master Station removeARTSOUND RL-9909 Intercom System for Counter Dual-Way Customer and Employee remove
Imagebaofeng-uv-5ra-dual band vhf uhf fm
SKUN-8000RSN-8020MSN-8010MSUV-5RAN-8011MSRL-9909
Rating
Price 3,100.86 incl. GR VAT 880.62 incl. GR VAT 514.75 incl. GR VAT 39.67 incl. GR VAT 390.68 incl. GR VAT 43.29 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Transceiver dual band VHF/UHF
  • Features a large backlit display with dual frequency indication V/U, U/V, U/U and V/V
  • With FM radio receiver and LED flashlight
  • Comes with belt clip and hand strap
  • Also communicates with PMR frequencies
Complete two way radio system for easy operation.
■ Built-in American Microsoft language processing chip for clear voices. ■ Indoor and outdoor volumes separately adjustable Suitable for places with inside and outside intercommunication such as banks, hospitals, ticket offices, and stock companies, etc. Simple Operation. ■ Easy for dual-way intercommunication without pressing any button. This system has 2 knobs to adjust the inside and outside volume. When the indicating light for audio turns green, the intercom could begin. Record jack: for dual-way audio record.
Content

The N-8000RS is a Sub-station interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Up to 16 sub-stations can be connected using 2-core shielded cables. The number of LAN-connected N-8000 system components such as the N-8000RS and IP intercom exchanges is 192 maximum in total. Connecting the unit to the LAN permits the sub-station to receive paging calls and make calls to both the master station connected to the IP intercom exchange and the IP master station. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.

Specification
Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption 40 W (at rated), 50 W (max.)
Interface Section for Sub-station Number of lines: 16 lines
Number of speech link: 2 links
Transmission system: Analog baseband
Transmission range: 500 m (546.81 yd)/φ0.5 mm (AWG24), 800 m (874.89 yd)/
Speech method: Half-duplex conversation by way of voice switch,
Connector: Removable terminal block (3 pins)
Wiring method: Two-core shielded cable
Audio output: Conversation: Max. 1 W, Paging: Max. 0.5 W/line
Feeding voltage/current: 22 V DC, 30 mA max.
Control signal: Call in button detection, privacy button detection, hook detection
Network Section Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (Speech: 2 links, Paging: Max. 8 zones)
Connector: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16-bit
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Indication Network LNK/ACT indication, Status lamp, Power-on indication lamp
Other Firmware update function, System data hold function, Reset switch (front panel)
Setting Method Rack, Desk, Surface mount
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 90 %RH or less (no condensation)
Finish Pre-coated steel plate, black, 30 % gloss
Dimensions 420 (W) × 44.3 (H) × 325.5 (D) mm (16.54" × 1.74" × 12.81“)
Weight 3.9 kg (8.6 lb)
Accessory Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (3 pins)…16, Plastic foot…4, Screw for fitting plastic foot…4,
Rack mounting bracket…2, Screw for mounting bracket…8, Screw for rack mounting…4
Option Wall mounting bracket: YC-850

 

This Master Station is designed to connect to the IP Intercom Exchange, and provides hands-free or handset conversation of high sound quality. It features dustproof and waterproof construction, and can be used in locations exposed to ambient temperatures ranging from -10℃ to +50℃. In addition to the functions of the standard Master Station, the Industrial-Use Station permits connection of external speakers, and can take out control signal for dial-in indicator from its contact output. This station can be mounted to the wall using an optional YC-280 wall mounting bracket.

Specification
* 0 dB = 1 V
Power Source 48 V DC (supplied from the IP intercom exchange (option))
Power Consumption 1.8 W (at rated), 2.4 W (max.)
Wiring Method Non-polar one pair stranded wire system
Transmission System 2 wire 160 kbps echo canceller transmission system
Signal Level Under 0 dB*
Speech Method Hands-free or handset conversation
Audio Frequency Range Transmission Range Hands-free 300 - 7,000 Hz
Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω)
Speaker: 5.7 cm cone-type, 0.6 W, 8 Ω
Microphone: Omni-directional electret condenser microphone
Handset Receive path: Cone-type, Send path: Electret condenser microphone
Dial-in Contact Output Line Connecting Terminal Open collector output (polarized), withstand voltage: Max. 30 V DC,
control current: Max. 50 mA, screwless connector (2 pins)
RJ11 modular jack
External Speaker Terminal 0.6 W, 8 Ω, screwless connector (2 pins)
Installation Method Desk/Surface mounted master station
(When mounting to the wall, use the optional YC-280.)
Operating Temperature -10℃ to +50℃
Operating Humidity Under 90% RH (no condensation)
Dust/Water Protection Finish IP54
Body, Handset: ABS resin, gray
Dimensions 170 (W) x 220 (H) x 97.8 (D) mm (excluding a curl cord and projection sections)
Weight Accessory 1 kg
Rubber cap…2
Option Wall mounting bracket: YC-280

 

This Master Station is designed to connect to the IP Intercom Exchange, and provides hands-free or handset conversation of high sound quality. This station can be mounted to the wall using an optional YC-280 wall mounting bracket.

Specification
* 0 dB = 1 V
Power Source 48 V DC (supplied from the IP intercom exchange (option))
Power Consumption 1.8 W (at rated), 2.4 W (max.)
Wiring Method Non-polar one pair stranded wire system
Transmission System 2 wire 160 kbps echo canceller transmission system
Signal Level Under 0 dB*
Speech Method Hands-free or handset conversation
Audio Frequency Range 300 - 7,000 Hz
Transmission Range Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω)
Hands-free Speaker: 5.7 cm cone-type, 0.6W, 8 Ω
Microphone: Omni-directional electret condenser microphone
Handset Receive path: Cone-type
Send path: Electret condenser microphone
Line Connecting Terminal RJ11 modular jack
Installation Method Desk/Surface mounted master station
(When mounting to the wall, use the optional YC-280.)
Operating Temperature 0℃ to +40℃
Operating Humidity Under 90% RH (no condensation)
Finish Body, Handset: ABS resin, gray
Dimensions 148 (W) x 208 (H) x 70.5 (D) mm (excluding a curl cord section)
Weight 700 g
Accessory Connection cord (3 m)…1
Option Wall mounting bracket: YC-280

 

BAOFENG UV-5RA Portable Two-Way Radio 136-174/400-480 MHz Dual-Band Transceiver (Black)

  Features: 1)      Output : 4W/1W 2)      FrequencyRange: 136.00-174.00 MHz & 400.00-480.00MHz 3)      Frequency Step Setting 4)      High &Low Power Switchover 5)      Battery Saving 6)      VOX Function 7)      Wide/Narrow Band Selection 8)      Auto-Back Light 9)      Dual Band Standby 10)  Time-out Timer (TOT) 11)  50 CTCSS and 104 DCS Codes 12)  Voice Prompt 13)  ANI Code 14)  PC or Manual Program 15)  DTMF Code 16)  PTT-ID 17)  AUTO Keypad Lock 18)  Busy Channel Lock Function 19)  Dual Band, Dual Display and Dual Standby 20)  Emergency Alarm 21)  Priory Scanning Function 22)  Relay Forwarding Confirmed (1750 HZ) 23)  Low Battery Warning 24)  U/V Cross Band Dual Watch 25)  Dimension: 110x58x32mm 26)  Packing Details:  40 Units/CTN,  Carton Size: 47.5x42x50 cm N.W: 21.5 KGS, G.W:22.5KGS
Specifications
Frequency Range: 136.00-174.00 MHz
400.00- 480.00MHz
Storage Channel 128
Step Frequency 2.5/5/6.25/10/12.5/20/25KHz
Rated voltage DC 7.4V
Frequency Stability ±2.5ppm
Work Temperature -20 ℃ to +60℃
BatteryCapacity H-1800m Ah (Li-ion Battery)
BatteryLife About 12 Hours
Frequency Combination PLL frequency synthesis
Antenna Impedance 50 Ω
Wok Mode Same Frequency  simplex Operation or Different Frequency  simplex Operation
Dimension 110x58x32 mm (Excluded Antenna)
Transmitter
Output Power 4W/1W
Modulation Mode(W/N Band) FM (F3E)
Maximum Frequency Deviation (W/N Band) ≤5 KHz
Spurious Power ≤7.5 µW
Adjacent channel power ≤-65dB/≤-60dB
Audio Distortion <5 %
SNR ≥-45dB/≥-40dB
CTSCC/DCS Frequency Deviation(W/N Band) 0.7±0.1KHz (W), 0.4±0.1KHz (N)
Modulation Sensitivity 8-12mV
Transmitting Current ≤1500mA
Receiver
 Sensitivity <0.20 µ V (12dB  SINAD)
Audio Power 1 W
Inter modulation Interference Resistance ≥65dB (W), ≥55dB (N)
Adjacent channel Sensitivity (W/N Band) ≥65dB (W), ≥55dB (N)
Audio Distortion 5 %
Receiving Current ≤ 380m A
Note: ■ Specifications are subject to change for technology improvement without notice  Package contents: 1 x radio 1 x desktop charger 1 x dual band antenna 1 x handstrap 1 x belt clip 1 x battery 1800mAh 1 x user guide

This Master Station is designed to connect to the IP Intercom Exchange, and provides hands-free conversation of high sound quality. With its space-saving design, this Master Station features the same functions as the Standard Master Station. This station can be mounted to the wall using an optional YC-290 wall mounting bracket.

Specification
* 0 dB = 1 V
Power Source 48 V DC (supplied from the IP intercom exchange (option))
Power Consumption 1.8 W (at rated), 2.4 W (max.)
Wiring Method Non-polar one pair stranded wire system
Transmission System 2 wire 160 kbps echo canceller transmission system
Signal Level Under 0 dB*
Speech Method Hands-free conversation
Audio Frequency Range 300 - 7,000 Hz
Transmission Range Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω)
Hands-free Speaker: 5.7 cm cone-type, 0.6 W, 8 Ω
Microphone: Omni-directional electret condenser microphone
Line Connecting Terminal RJ11 modular jack
Installation Method Desk/Surface mounted master station
(When mounting to the wall, use the optional YC-290.)
Operating Temperature 0℃ to +40℃
Operating Humidity Under 90% RH (no condensation)
Finish Body: ABS resin, gray
Dimensions 92 (W) x 195 (H) x 56.1 (D) mm
Weight 400 g
Accessory Connection cord (3 m)…1
Option Wall mounting bracket: YC-290

 

RL-9909 Dual-Way intercom for Store Station Window, Bus Station, Train Station, Counters. Description:
  •     Streamline design: The main unit has aluminum alloy shell, and the extension has built-in speaker.This system has simple connection for DIY operation.
  •     Highg quality: This system has top-quality speaker and high-sensitive microphone. Especiall the metal tube microphone is deal for the counter and the dual-way inter-communication.
  •     Good performance: The voice from this system is clear,and natural. There is a switch ony for the volume control.
  •     Advance technique: For this system,we adopter the advanced microcomputer from U.S.A
  •     Definite instruction: The indicating lamp shows the track's working status.
  •     Simple operation I: Easy for dual-way intercommunication without pressing button.
  •     Simple operation II: This system haw two knobs to adjust the inside and outside volume. When the indicating lamp for audio turns green,the intercommnication could begin.
  •     Simple operation III: You could record the voice through record jack.
  •     Best Choice: It suitable for the Bank, Securities Company , Hospital, Station where the security glazing is installed.
Feature:
  •     Dual-way intercommunication
  •     Slim fit design of speaker
  •     Anti-interruption and noise
  •     Dual-way audio record
Performance Data:
  •     Brand: RL
  •     Working voltage: DC9V/0.5A
  •     Input voltage: AC 240V
  •     Cale length: 160cm
  •     Main sound (sub sound): 2W, 100Hz-15KHz
  •     Inside microphone: -48db  20Hz-20KHz
  •     Outside microphone: -48db  20Hz-16KHz
  •     Main box size: 158x87x46(335)mm
  •     Deputy box: 91x77x23mm
Package Includes:
  •     1 x Dual-way counter interphone
  •     1 x External speaker
  •     1 x Charger
  •     1 x English User Manual
Weight4.00 kg1.00 kg0.70 kg1 kg0.40 kg1.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 1.00 kg
Weight 0.70 kg
Weight 1 kg
Weight 0.40 kg
Weight 1.50 kg