Content | * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-1/4” | 10.8 cm
Driver Complement :One 1" pure aluminum dome pivoting tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :28 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years | Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums |
The JBL Professional Control 227C is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227C incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 227C features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. An 8 ohm driver is utilized on the Control 227C and offers 150 Watts of continuous power handling capability.
The Control 227C is easy to install and features a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.
The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
To ensure long life and reliability, Control 227C passes JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.
Features
- Consistent 120° broadband pattern control forexceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
- Extraordinary clarity for speech and vocals withextended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille (sold separately)
Specifications
- Frequency Range (-10dB): 43Hz - 19kHz
- Frequency Response (-3dB): 75Hz - 17kHz
- Nominal Sensitivity: 90dB measured half-space; 95dBcomputed for competitive comparison
- Nominal Coverage Angle: 120 degrees conical,broadband
- Nominal Impedance: 8 ohms
- Low Frequency: 6.5" Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia.): 12" round baffle x depth fromback of baffle of 5.8“
|
Outer Flange Dimensions | Metric :15-1/2” W x 15-1/2” H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8” W x 14-3/8” H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8” | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years
|
Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 5-1/4” bass radiators
Freq. Response: 30 Hz - 30 kHz,
Impedance: 8 Ohms Rec. Ampl. Power: 10 - 250 watts
Inputs: One pair of gold plated spring loaded posts, Finishes: Paintable White
Outer Dimensions: 29.2 x 29.2 x 14.9cm
Cut Out Dimensions: 26.4 x 26.4 x 14.9cm
Driver Complement |
---|
Tweeter | Quantity | 1 | Diameter | 1" (2.54cm) | Type | Pure Aluminum Dome | Mid / Woofer | Quantity | 2 | Diameter | 4 1/2" (11.43cm) | Type | High Definition Bass/Midrange Driver | Bass Radiator | Quantity | 2 | Diameter | 5 1/4" (13.34cm) | Type | Planar Bass Radiator |
Electrical |
---|
Audio Inputs | Speaker Level | 1 Pair (Heavy Duty Spring Loaded) | Maximum Sensitivity | 1 watt @ 1 Meter | 92 dB | Total Frequency Response | Overall | 30 Hz - 30 kHz | Nominal Impedance | Compatible with | 8 ohm | Crossover | A/V Receiver Crossover Setting | Small (60 Hz) | Power Handling | 10 - 250 watts per channel |
Installation |
---|
Cut Out Dimensions | Height | 10 3/8" (26.35cm) | Width | 10 3/8" (26.35cm) | Mounting Depth | 5 7/8" (14.92cm) | Grille Dimensions | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Outer Flange | Height | 11 1/2" (29.21cm) | Width | 11 1/2" (29.21cm) | Placement | Orientation | In Ceiling | Cabinet Type | Speaker Enclosure | Sealed Medite |
|
Reviews
There are no reviews yet.