| Content | * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-1/4” | 10.8 cm
Driver Complement :One 1" pure aluminum dome pivoting tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :28 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years |
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
Most compact of the JBL ceiling speakers, the Control 24C contains a coaxially mounted 4" woofer and 3/4" titanium-coated tweeter, providing high-fidelity sound over an extremely wide coverage area.
Specifications:
- 80 Hz to 20 kHz frequency range (-10 dB)
- 80 watts continuous program power capacity
- 86 dB sensitivity (1W/1m)
- 16 ohms nominal impedance
- 130° conical coverage (polar)
- Steel back-can with removable locking connector
- Dimensions (height x diameter): 7.9" x 7.7" (200 x195 mm)
- Net Weights: 2.7 kg (6 lbs)
|
* Frequency Response (-10 dB)1: 150 Hz - 20 kHz
* Frequency Range (±3 dB)1: 200 Hz - 17 kHz
* Power Capacity:
o 50 Watts Continuous Program Power (2 hrs)
o 25 Watts Continuous Pink Noise (2 hrs)
o 30 Watts Continuous Program Power (100 hrs)
o 15 Watts Continuous Pink Noise (100 hrs)
* Nominal Sensitivity:
o 87 dB (4.0 V, 1 W)
o 84 dB (2.83 V)
* Nominal Coverage Angle3: 140° (+25°/-50°)
* Directivity (Q): 4.7
* Directivity Index (DI): 6.2 dB
* Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
* Rated Impedance: 16 ohms (no transformer taps)
* Recommended High-Pass Frequency: 150 Hz
Transducer
* Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
Enclosure
* Enclosure Material: High impact polystyrene
* Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
* Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
* Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
* Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
* Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
* Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
* Net Weight (ea): 0.7 kg (1.5 lbs)
* Shipping Weight (pair): 2.0 kg (4.3 lbs)
* Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
|
Reviews
There are no reviews yet.