| Content | * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
Outer Flange Dimensions | Metric :11” x 12-3/4” | 27.9 x 32.4cm
Cut Out Dimensions | Metric :9-7/8” x 11-5/8” | 25.1 x 29.5 cm
Depth from Flange | Metric :3-7/8” | 9.8 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 4-1/2” bass radiators
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | Metric :13 lbs | 5.9 kg |
Outer Flange Dimensions | Metric :15-1/2” W x 15-1/2” H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8” W x 14-3/8” H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8” | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years
|
- Bipolar arrays evenly disperse sound effects over a broad area
- Dual 1" pure aluminum dome tweeters produce pristine highs
- High dynamic impact with a pair of 3.5" cast basket drivers and two 3.5" pressure-coupled Low Bass radiators
- Integrated dense wood enclosures provide easy installation and consistent high performance
In-Ceiling Or In-Wall, They’re Incredible
The Definitive Technology Architectural Speaker line delivers high performance sound while remaining practically invisible. Intended for use in custom home theaters of the highest quality, UIW RSS III speakers feature non-resonant medite cabinets, producing the tightest bass, clearest midrange and an ideal combination of direct and ambient sound. The result is uniquely immersive surround performance that completely envelops listeners in an expansive, 360-degree sound stage.
Overall
Accessories
- Included Accessories
- (1) Wall Mounting Template
- (1) Paint Mask
- (1) Paintable Grille
- (1) Self Adhering Foam Gasket
Warranty
- Cabinet Warranty5 years
- Drivers Warranty5 years
Shipping Cartons
- Carton 113.5" (34.29 cm) h x 13.5" (34.29 cm) w x 7.25" (18.42 cm) d - 9 lbs (4.08 kg)
In-Wall Speaker
- Qty Included1
- Availability US
- Driver Complement
- (2) 1" (2.54 cm) d (Round) - Tweeter
- (2) 3.5" (8.89 cm) d (Round) - Mid/Woofer
- (2) 3.5" (8.89 cm) d (Round) - Bass Radiator
- Grille Dimensions11" (27.94 cm) h x 9.44" (23.98 cm) w
In-Wall Mount
- ShapeRectangle
- Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w
In-Ceiling Mount
- ShapeRectangle
- Dimensions9.88" (25.1 cm) h x 8.31" (21.11 cm) w
Inputs
- Audio Inputs
- Speaker Inputs(1) Pair of Heavy Duty, Spring Loaded
Audio Quality
- Total Frequency Response40 Hz → 30,000 Hz
- Nominal Impedance Range8 ohms → 4 ohms
- Max Sensitivity (1 watt @ 1 meter)92 dB
Crossover
- A/V Receiver Crossover SettingsSmall (120 Hz)
External Amplifier
- Recommended Amplifier Power Per Channel10 watts → 300 watts
|
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
|
Reviews
There are no reviews yet.