Content | JTS UR 816D GT Wireless Guitar / Saxophone Microphone System
JTS UR-816D/GT Wireless Microphone System for Guitar & Wind Instruments, The JTS UR-816D GT comes with an inter-changeable jack or mic fitting and 16 preset selectable UHF channels. The JTS UR-816D/GT is the ultimate wireless experience for the musician on the move.
This truly ingenious system from JTS enables easy wireless micing of either an electric/electro acoustic guitar or wind instrument thanks to the interchangeable jack or mic fitting. The system comprises of the UR-816D UHF PLL Single Channel Diversity Receiver, with a UT-16GT UHF PLL Guitar/Winds Transmitter and UT-508GT Sub miniature winds transmitter. System Includes
- UR-816D UHF PLL Single Channel Diversity Receiver
- UT-16GT Sub Miniature Guitar Transmitter
- UT-508GT Sub Miniature Guitar Transmitter
UR-816D UHF PLL Single Channel Diversity Receiver
Features
- Preset 16 selectable UHF channels.
- Single transmitter operation.
- Diversity technology prevents dropouts in the RF link.
- PLL synthesized technology.
- Noise mute and pilot tone squelch.
- Equipped with both XLR balanced and ø6.3mm unbalanced outputs.
- Tuned antennas maximize the effective range of the wireless link.
- Compact half rack space design.
Specification
- Frequency Preparation: PLL Synthesized Control
- Carrier Frequency Range: 502~960 MHz
- S/N Ratio: > 105dB
- THD:
|
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
±0.005% (-10~+60℃)
|
Modulation Mode
|
Digital Modulation
|
Output Power
|
10 ~ 100 mW (country dependent)
|
Spurious Rejection
|
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
T.H.D.
|
|
ADC Dynamic Range
|
112 dBA
|
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
|
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
|
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
|
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
|
Impedance
|
≧ 16 Ω
|
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
|
Antenna Connector
|
TNC (50 Ω impedance)
|
Power Supply
|
DC 12~15V
|
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
|
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
- The ACT-818 is a 1/2U single channel rack-mountable receiver with metal chassis.
- A full-color VFD (vacuum fluorescent display) provides clear viewing of all parameters. All controls are intuitive and easily accessible, allowing for quick and easy system setup via a single rotary control.
- Enhanced RF circuitry improves anti-interference characteristics and system compatibility with a 64 MHz-wide bandwidth, allowing more interference-free channels to be selected.
- New digital diversity receiving technology eliminates signal dropout and enhances receiving range.
- Full-range sound quality is not affected by the strength of RF signals or operating distance.
- Digitally-processed RF circuitry and DigitnamicPlus™ technology eliminates compander noise, assuring a wireless sound quality that easily rivals cable transmission.
- Improved proprietary Audio A/D Converter provides a true dynamic range of 115 dBA, T.H.D.
- AES3id Digital Audio Interface facilitates a direct connection to digital mixing consoles and transmits signal without distortion, ensuring a stable S/N ratio which will not deteriorate in long distance transmission.
- Proprietary 256-bit encryption provides secure audio transmission, preventing unauthorized listening.
- 10 built-in SmartEQ™ presets and user-defined microphone capsule equalization allows faithful sound reproduction to suit artistsʼ preferences.
- 10 built-in digital anti-feedback SmartEQ™ presets minimize feedback effectively without sacrificing sound quality.
- Optional MIPRO RCS2.Net software allows real-time network remote-controlling and monitoring of 64 systems.
| Frequency Range | 480~544MHz(US & EU)
540~604MHz(US & EU)
636~700MHz(EU)
696~760MHz(EU)
760~824MHz | | | Bandwidth | 64 MHz | | | Preset Frequency | 12 non-interference compatible frequencies in group 1-10.
16 non-interference compatible frequencies in group 11-16.
16 user-defined frequencies can be stored in group 18.
216 preset frequencies in total. | | | Channel Grid | 25 kHz | | | Channel Set-up | Scan & ACT sync | | | Audio Sampling | 24-bit / 44.1 kHz Rate | | | Audio Compression | 2nd Generation DSP inertial coding | | | Latency | | | | Frequency Response | 20 Hz~20 kHz (-2dB) | | | S/N Ratio (analog output) | > 115dB(A) | | | T.H.D. | | | | Encryption | 256 bit | | | Receivers | | | Chassis /Channel | EIA Standard 19 " 1/2U, Single | | | Sensitivity | 15 dBμV at S/N≒118 dBA | | | Image and Spurious Rejection | > 85dB | | | Receiving Mode | Digital Diversity | | | Analog Output | Balanced XLR × 1
Unbalanced 6.3 mm (1/4 ") × 1 | | | Analog Output Switch | Mic / Line × 1 | | | Digital Audio Interface | AES3id output. BNC female × 1 | | | Digital Equalizer | 10 microphone capsule modeling presets | | | Digital Anti-feedback Equalizer | 10 anti-feedback microphone capsule modeling presets | | | PC Interface | USB or RS-232 Interface. Proprietary MIPRO ACT-BUS | | | Display | Full-color VFD | | | Battery Meter | Transmitter battery status | | | Antenna Input | 50Ω TNC Female Connector × 2 | | | Power Supply | External AC power supply, 12~15V DC, 1A; Power Consumption: 7.5W | | | Dimensions (W×H×D) | 210 × 44 × 230 mm (8.3 × 1.7 × 9 ") | | | Weight | Approx. 1.1 kg (2.4 lbs) | | | Transmitter | ACT-80H / 80HC Handheld, ACT-80T / 80TC Bodypack & TA-80 Plug-on Transmitter | | | Operating Temperature | -10~+60 ℃ | | | Notes | Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries. |
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Metal 1U Rack System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 120 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1
RF2 | Compatible Channels | 14 | Transmission Range | 300 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required | Transmitter Specs | | TBP12 Transmitter | A/D Conversion | 24-bit Delta Sigma, 128 times oversampling | Input Impedance | 1.3 M-Ohm | Connectors | TA4f | Controls | Power On/Off, Channel Select | LEDs Display | Power, Audio Status | LCD Display | Channel Number, Battery Life | Battery Life | Approx. 8 hours (2x AA alkaline batteries) | Receiver Specs | | RXR12 Receiver | D/A Conversion | 24-bit Delta Sigma, 128 times oversampling | Connections | 1/4-inch output, XLR output; Tuner pass-thru | LEDs Display | Audio Status, Transmitter Battery Life, Mute, RF | LCD Displays | Channel Number, Transmitter Battery Life | Controls | Channel select, Cable Tone Simulator, Setup | Power Requirements | IEC connector for internal switching power supply that works worldwide |
| A lightweight, low-profile wireless system that provides guitarists with 200 feet of freedom.
The Line 6 Relay G50 Digital Wireless System provides a pure signal with a clarity that rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 200 feet. Traditional wireless systems compromise the sound of your instrument by rolling-off crucial high- and low-end frequencies and compressing their signals. This system on the other hand, offers superior sound with full bandwidth and zero compression.
Professional Dependability
Broadcasting over the 2.4GHz band keeps the Line 6 Relay G50's signal free from many kinds of interference. Traditional wireless guitar systems are susceptible to dropouts, static, and many other kinds of interference. Broadcasting over congested UHF bands, their signals may be affected by interference generated as far away as 100 miles or more. For added security, the Relay G50 employs exclusive signal protection technology, simultaneously broadcasting encrypted data streams to multiple antennas.
Refreshing Simplicity
The Relay G50 is a low-profile wireless system that's easy to use. The lightweight transmitter remains out of the way of your performance and its LCD displays channel number and battery life. The rugged metal receiver offers bright and easy-to-read LEDs that display power, status, and battery life. Its dual 1/4" outputs make it an easy addition to your pedal board.
Attached to Your Guitar Cable?
For players attached to cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? The Line 6 Relay G50 sounds just like a cable, but it also sounds just like your cable. It features EQ settings that match the frequency responses of typical guitar cables. Different players use different cables, but all players can use Relay G50.
The Wireless Revolution
Relay G50 is proudly ushering in a better-sounding and more dependable era of wireless guitar systems. It will inspire you to explore new areas of your music and the stage.
The wireless guitar system comes complete with transmitter, receiver and all necessary accessories including locking cable, power supply, and batteries.
Features
200-foot range, line-of-sight
Broad 10Hz - 20kHz frequency response; Superior 120dB dynamic range; 24-bit digital conversion
8 hours of battery life (AA alkaline batteries)
Lightweight, low-profile and easy to use
Bright LEDs and LCD show power, status, and battery life
EQ presets match Relay G50 to the sound of your guitar cable
Comes complete with transmitter, receiver and all necessary accessories including locking cable, power supply and batteries
2.4GHz band is optimal for guitar wireless, FCC/DTV compliant
Multiple layers of signal protection; Encrypted data stream; Simultaneous broadcasts on multiple channels | Shure QLXD14 Wireless System, 470-534MHz, Includes QLXD1 Bodypack Transmitter, QLXD4 Receiver
The QLXD14 Bodypack Wireless System is part of the QLX-D wireless systems family.
The QLXD14 wireless system includes a QLXD4 receiver, QLXD1 transmitter, a WA305 instrument cable, PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, a zipper bag, two AA Alkaline batteries, and rackmount hardware. The QLXD14 system offers good wireless functionality for demanding live sound events and installations.
300 feet (100 meter) line-of-sight operating range 120 dB dynamic range Digital predictive switching diversity receiver to capture the clearest sound 64 MHz tuning bandwidth Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Selectable display mode showing group/channel, frequency, or battery runtime Rugged metal construction |
Reviews
There are no reviews yet.