Content | JTS UR 816D GT Wireless Guitar / Saxophone Microphone System
JTS UR-816D/GT Wireless Microphone System for Guitar & Wind Instruments, The JTS UR-816D GT comes with an inter-changeable jack or mic fitting and 16 preset selectable UHF channels. The JTS UR-816D/GT is the ultimate wireless experience for the musician on the move.
This truly ingenious system from JTS enables easy wireless micing of either an electric/electro acoustic guitar or wind instrument thanks to the interchangeable jack or mic fitting. The system comprises of the UR-816D UHF PLL Single Channel Diversity Receiver, with a UT-16GT UHF PLL Guitar/Winds Transmitter and UT-508GT Sub miniature winds transmitter. System Includes
- UR-816D UHF PLL Single Channel Diversity Receiver
- UT-16GT Sub Miniature Guitar Transmitter
- UT-508GT Sub Miniature Guitar Transmitter
UR-816D UHF PLL Single Channel Diversity Receiver
Features
- Preset 16 selectable UHF channels.
- Single transmitter operation.
- Diversity technology prevents dropouts in the RF link.
- PLL synthesized technology.
- Noise mute and pilot tone squelch.
- Equipped with both XLR balanced and ø6.3mm unbalanced outputs.
- Tuned antennas maximize the effective range of the wireless link.
- Compact half rack space design.
Specification
- Frequency Preparation: PLL Synthesized Control
- Carrier Frequency Range: 502~960 MHz
- S/N Ratio: > 105dB
- THD:
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Polycarbonate Stompbox-style System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 118 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1 | Compatible Channels | 6 | Transmission Range | 100 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required |
|
- Ultra-compact, lightweight and rugged magnesium housing.
- 64 MHz wide bandwidth.
- Dual-antenna diversity design eliminates signal dropouts and enhances RF stability.
- lightweight, exceptionally durable magnesium alloy bodypack case.
- LCD screen displays audio & RF metering, battery status bar, group & channel, R/L balance.
- Selectable stereo, mono or mixed output mode.
- PLL-synthesized technology enables large compatible channels operation.
- ACT syncs the transmitter & receiver frequency automatically.
- Menu controls and indicators accessed by three buttons.
- S/N ratio > 95dBA (stereo receiving).
- 95dB stereo separation.
- 20 Hz ~ 15 kHz Frequency Response.
- 0.1% @ 1kHz distortion.
- Earphone output power 120mW @ 16Ω.
- Extended operating hours with 2 AA alkaline batteries.
- Dual unbreakable soft antennas.
Frequency Range
|
480~824 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Compatible Channels & Preset Channels
|
12 compatible channels in group 1-10
16 compatible channels in group 11-16
Testing channels in group 17
16 user-defined channels in group 18
216 preset channels
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
± 0.005% (-10 ~ +60℃)
|
Sensitivity
|
10μV input level, S/N > 90dB (Stereo)
|
Modulation Mode
|
Digital Modulation
|
Receiving Mode
|
Diversity Receiving
|
Channel Set-Up
|
ACT Sync
|
Spurious
|
|
T.H.D
|
0.1%@1 kHz
|
Max. S/N ratio
|
95 dBA (Stereo)
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
Stereo Separation
|
> 95 dB
|
Volume Control
|
126 dB (1dB step)
|
LCD Display
|
audio & RF metering, battery status bar, group & channel, R/L balance
|
Output Jack
|
3.5 mm Ø stereo earphone jack
|
Output Power
|
2 × 120 mW @ (16Ω)
|
Earphone Impedance
|
≧ 16 Ω
|
Power
|
2 "AA” Alkaline batteries
|
Current Consumption
|
Approx. 170 mA
|
Operating Time
|
Approx. 8 hours with 2 AA alkaline (stand-by)
|
Dimensions (W × H × D)
|
63 × 82 × 23 mm (2.6 × 3.2 × 0.9 ")
|
Net Weight
|
Approx. 98 g (3.5 oz) excluding batteries
|
Transmitter
|
MI-909T
|
Operating Temperature
|
-10 ~ +60℃
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in | Free yourself! for live sound, presentations and installations
The WMS420 wireless microphone system provides a highly flexible as well as easy to use solution. The ultra high frequency system is set up within seconds and is equally suitable on stage as well as in locations where a single- or multi channel solution is needed.
The entire WMS420 wireless system consists of the SR420 stationary receiver, HT420 handheld transmitter and the PT420 pocket transmitter. The HT420 handheld transmitter is available with the patented D5 dynamic microphone acoustic. This capsule guarantees maximum rejection against feedback, reduced handling noise and the famous AKG sound. Both transmitters are shipped with charging contacts that enable the use of rechargeable batteries. Moreover the transmitters offer exceptional eight hours of operation time from a single AA size battery, which dramatically reduces the operating costs in day-to-day use.
The detachable receiver antennas allow the use of professional accessories, such as antenna splitters and remote mounted directional antennas for multi channel systems. The WMS420 series includes three different bodypack sets. The head-worn set includes the high performance C555L condenser microphone. The presenter set includes the professional C417L lavalier microphone. The guitar set includes an instrument cable. With the AKG WMS420 system up to eight channels can be run simultaneously.
Detachable receiver antennas
enable the use of professional RF accessories
Patented state-of-the-art D5 dynamic capsule
cuts through the mix
Transmitters with charging contacts
saves money in day-to-day use and preserves the environment
Compatible with all AKG MicroMics
almost all applications can be covered
Low battery warning indicator
for secure operation
| Shure QLXD14 Wireless System, 470-534MHz, Includes QLXD1 Bodypack Transmitter, QLXD4 Receiver
The QLXD14 Bodypack Wireless System is part of the QLX-D wireless systems family.
The QLXD14 wireless system includes a QLXD4 receiver, QLXD1 transmitter, a WA305 instrument cable, PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, a zipper bag, two AA Alkaline batteries, and rackmount hardware. The QLXD14 system offers good wireless functionality for demanding live sound events and installations.
300 feet (100 meter) line-of-sight operating range 120 dB dynamic range Digital predictive switching diversity receiver to capture the clearest sound 64 MHz tuning bandwidth Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Selectable display mode showing group/channel, frequency, or battery runtime Rugged metal construction |
Reviews
There are no reviews yet.