| Content |
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive? Woofer.
Specifications:
|
Frequency Range
|
:
|
57 Hz - 20 kHz(-10 dB)
| |
Frequency Response
|
:
|
75 Hz - 20 Hz (+/-3db)
| |
Coverage Pattern
|
:
|
100 x 15 nominal
| |
Crossover Modes
|
:
|
4 Ohms Bi-amp / passive,
externally switchable
| |
Crossover Frequency
|
:
|
132 dB SPL peak 1.2 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
| |
System Maximum SPL
|
:
|
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
| |
System Sensitivity (1w @ 1m
|
:
|
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps
| |
HF Driver
|
|
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
| |
Nominal Impedance
|
:
|
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
18 mm, 11-ply birch plywood
| |
Suspension / Mounting
|
:
|
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
| |
Finish
|
:
|
Black DuraFlex? finish
| |
Grille
|
:
|
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
| |
Input Connectors
|
:
|
Neutrik? Speakon? NL-4 (x2)
| |
Dimensions (H x W x D)
|
:
|
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
| |
Net Weight
|
:
|
21.8 kg (48 lb)
| |
Optional Accessories
|
:
|
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
|
|
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
| Features : | | Specifications : |
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
| - JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
| - VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
| - Constant Curvature waveguide for unprecedented array coherence.
| - Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
| - Array Configuration Selector permist "array shading“.
| | |
| Power Rating | : | 1750 Watts Peak
875 Watts Continuous |
| | Frequency Range | : | 57 Hz - 20 kHz
(-10 dB) |
| Dimensions
(H x W x D) | : | 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in) |
| | Frequency Response | : | 75 Hz - 20 Hz
(+/-3db) |
| | Maximum Peak Output | : | 136 dB SPL at 1m |
| | Coverage Pattern | : | 100 x 15 nominal |
| | DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) | : | LF: 750 Watts, HF: 125 Watts |
| | DPC-2 Output Sectoin | : | LF: Dual-Bridged Technology™, Class D |
| | Autio Input Connector | : | XLR with loop through |
| | LF Driver | : | 1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
| | HF Driver | : | 3 x JBL 2408J, 38 mm (1.5 in) |
| | User Controls | : | Input Attenuator (0-16 dB) |
| | Signal Processings | : | DSP based, resident in Input Module |
| | AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60 Hz |
| | AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
| | AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
| | AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
| | Enclosure | : | 25/15 mm, 11-ply birch plywood |
| | Suspension / Mounting | : | Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
| | Finish | : | Black DuraFlex™ finish |
| | Grille | : | Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
| | Net Weight | : | 24 kg (52 lb) |
| | Optional Accessories | : | VRX-AF: Suspension array frame | | |
|
The SR-C8S is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48)“
and Neutrik NL4MP × 2 | | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“) | | Weight | 16 kg (35.27 lb) | | Accessory | M8 connection bolt …4 | | Option | Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206 |
|
Hχοστήλη Line Array, 150W/600W peak, με τεχνολογία σταθερής διασποράς Constant Beam width Technology με 8 x 2? full range woofers 80Hz-20kHz-Οριζόντια x Κάθετη Διασπορά 150 x 20° μοίρες. Διαθέτει διακόπτη επιλογής για χρήση φωνής 115dB cont/121 peak/Μουσικής 111dB cont/117 peak. Διαθέτει κύκλωμα sonic guard για προστασία υπερφόρτωσης και μετασχηματιστή για χρήση 70/100V/60W/ 30W/15W ?αλλά και χρήση 8Ω. Περιέχεται βάση στήριξης. Καμπίνα fiberglass/γρίλια αλουμινίου με 10x M6 υποδοχές στήριξης. Πιστοποίηση IP544 /IEC 259 για αντοχή σε υγρασία και αλάτι. Διατίθεται σαν option προστατευτικό κάλυμμα συνδέσεων MTC-PC2. Διαστάσεις ΥΠΒ: 528 x 99 x 153 mm. Χρώμα Μαύρο-Λευκό. Βάρος 4.1kg. |
The VT4880A Dual 18" Ultra Long Excursion Subwoofer Line Array Element is designed to deliver high fidelity sound reinforcement of sub-low frequencies for a wide variety of live music and A/V support applications. Typical uses include concert audio and multi-media presentations where extended low-frequency performance is desired.
| Features : | | Specifications : |
- Advanced, Ultra Long Excursion Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers
| - Advanced Construction Techniques and PlyMax™ panels provide exceptionally rigid, lightweight enclosure
| - Rugged DuraFlex™ exterior finish; weather-resistant components
| - Integrated Suspension System: premium heat-treated alloys. Hingebars included.
| | |
| Frequency Range | : | 25 Hz – 160 Hz (-10 dB) |
| | Frequency Response | : | 29 Hz – 120 Hz (±3 dB) |
| | Continuous Power Rating | : | 4000W |
| | Sensitivity | : | 95dB (1W/1m) |
| | Nominal Impedances | : | 2 x 8 ohms |
| | Dimensions (W x H x D ) | : | 1229 mm x 493 mm x 860 mm
(48.3" x 19.4" x 33.9“) |
| | Weight | : | 83.9 kg (185 lb) | | |
|
TOA SR-A Series Mid-Size Line Arrays feature TOAʼs proprietary "Synch-Drive" horn technology (pat. pending) to provide a uniform, high frequency sound field offering excellent sound clarity and minimal interference. Mid-high modules include the SR-A12L (long-throw) and the SR-A12S (short-throw) each with dual compression drivers and 12" low frequency driver. The SR-A18 subwoofer module features a heavy duty 18" low frequency driver rated at 720 Watts continuous power handling. Along with weather resistant models and multiple mounting hardware options, the SR-A Series Line Arrays are backed with a five year product warranty. | FEATURES: | - Designed for wide bandwidth response - These compact and powerful 2-way modular speaker units can be used in multiple configurations as required to deliver greater output power with a more extended frequency response.
- High-performance driver units - Each Type A Series speaker module contains a 30cm (12“) low frequency unit and a high-frequency horn attached to two compression drivers for greater output.
- Wavefront control - The horn incorporates a proprietary phase wavefront control throat that functions to obtain the best possible performance from the high frequency drivers.
- Adjustable sound coverage - Type A Series provides two speaker configurations designed for specific coverage characteristics, each having a different taper. The 5-degree taper is for effectively transmitting sound over distance while the 15-degree taper is optimized for excellent short range coverage.
- Simple maintenance - Maintenance and servicing are made easier on the Type A Series to suit it for permanent installations. All driver replacement is possible from the speaker's rear, a simple and speedy procedure.
- SR-A12L Long-throw enclosure (15°V x 90°H)
- SR-A12S Short-throw enclosure (5°V x 90°H)
- Components: Dual compression drivers. 12” low frequency driver. Power handling: 450 W (LF), 180 W (HF)
- SR-A18 Subwoofer (Sold Seperately) 18” low frequency Power handling: 720 W
- Five year warranty
| | General Specs: | | | Enclosure: | ....... | Bass Reflex Type | | | Power Handling Capacity: | ....... | Continuous Program: Low 450W, High 180W | | | Rated Impedance: | ....... | Low: 8 Ohms, High: 16 Ohms | | | Sensitivity: | ....... | Low: 98dB, High: 109dB both at 1W/1M | | | Frequency Response: | ....... | 50 Hz - 20kHz (When using DP-0206 Option) | | | Crossover Frequency: | ....... | 1000Hz (When using DP-0206 Option) | | | Directivity Angle: | ....... | Horizontal: 90 degrees
Vertical: 15 degrees | | | Speaker Component: | ....... | Low frequency: 30cm cone-type
High frequency: Wave front control horn 90° (horizontal) × 15° (vertical) + compression driver × 2 | | Input Connector: | ....... | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x 2 (usable connector: Neutrik NL4FC) | | | Finish: | Enclosure: | ....... | Plywood black, paint | | | Front Grill: | ....... | Punched steel plate, black, acrylic paint | | Dimensions: | ....... | 740 (W) x 433 (H) x 467 (D) mm | | | Weight: | ....... | 47kg including accessories | | | Accessories: | ....... | Joint Plate x 2, Joint plate mounting bolt (M10) x 16 | | | Option: | ....... | Rigging Frame: SR-RF12, Digital Processor: DP-0206 | |
|
Reviews
There are no reviews yet.