Content |
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut | Frequency Response +/- 3dB: 50Hz - 35KHz
Sensitivity (1W@1M): 90dB
Driver Compliment: 2 x 140mm (5 1/2“) C-CAM® mid/bass driver with RST® technology.
1 x 25mm (1“) C-CAM® gold dome tweeter.
Nominal Impedance: 8 ohms
Maximum SPL (each): 116.8 dBA
Recommended Amplifier Requirements (RMS): 50 - 200W
Bass Alignment: Bass reflex - twin front mounted Dual HiVE®II ports
Power Handling (RMS): 200W
Crossover Frequency: 600Hz & 3.0kHz
External Dimensions:
(H x W x D) 610 x 140 x 100 mm
24 x 5 1/2 x 3 15/16 inch
Weight (Individual): 6.85kg (15 1/8lbs)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Dimensions | Metric :14-3/4" W x 5" D x 5" H | 37.5 x 12.7 x 12.7 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :47 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Leveler Foot; Two ¼ 20 insert cover plugs
Mounting Options :On Shelf with included leveling foot; Equipped with two ¼ 20 sized threads to accommodate on wall mounting with two ProMount 80 (available separately)
Packaging :One to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years |
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31kHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 90 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options keyhole slot; one .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.70 lbs. (2.13kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
Frequency Response: 45Hz- 100kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 60 - 200 W Bass Alignment: Rear Ported HiVe II Technology Mid / H.F Crossover Frequency: 1800 Hz Bass Low Pass Crossover Frequency: 250 Hz Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand: Width: 583mm (22 15/16 inches) Height: 225mm (8 7/8 inches) Depth: 291.2mm (11 7/16 inches) Stand Dimensions: Width: 610mm (24 inches) Height: 335mm (13 13/16 inches) Depth 463mm (18 1/4 inches) Weight: 19 Kg (41.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Frequency Response: 32 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Twin Ported HiVe II Technology Sealed Mid-range TLE Mid / H.F Crossover Frequency: 4000 Hz Bass Low Pass Crossover Frequency: 550 Drive Unit Complement: 2 x 8 long-throw RDT bass drivers 1 x 4" RDT Mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand (H x W x D): 288 x 800 x 368 mm (11 5/16 x 31 1/2 x 14 1/2 inch) Stand External Dimensions - Including Plinth Feet (H x W x D): 335 x 610 x 463 mm (13 13/16 x 24 x 18 1/4 inch) Weight: 33.5 Kg (73.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Reviews
There are no reviews yet.