Content |
System power: 5 x 125 watts for satellite speakers
Decoding: Dolby Digital, DTS and Dolby Pro-Logic II built in
Magnetically shielded
WxHxD (mm) / Weight: Satellites: 68 x 103 x 90
Subwoofer: 268 x 190 x 350
System controller: 228 x 145 x 59
Overall weight: 14.5 kg
Connections: 3 sets of line-level stereo inputs, 1 x coaxial digital input, 1 x optical digital input, 5 x speaker outputs, line-level subwoofer output
Controls: Volume/power level, input
Accessories: Supplied with wall-brackets for all satellite speakers, rubber feet for subwoofer, 2 x 5 metre, 2 x 10 meter and 1 x 3 metre cable runs, remote control batteries, connecting leads and power supplies
Remote control: handset and batteries supplied
Colour: Silver |
T101 / T101c
Design Two-way closed box
Drive units 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response 80Hz - 30kHz
Crossover frequency 1.7kHz
Amplifier requirements 10 - 100 W
Sensitivity (2.83V/1m) 90dB (wall mount)
87dB (floor stand mount)
Maximum output (SPL) 107dB
Impedance 8Ω
Internal volume 0.7 Litres
Weight 1kg (2.2lbs)
Dimensions
(H x W x D) 330* x 140 x 35 mm
(13.0 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode 140 x 330 x 35 mm
(5.5 x 13.0 x 1.4 in.)
Finish Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.
T-2
Design Closed box powered subwoofer
Drive units 1 x 250mm (10in.)
Frequency response 30Hz - 250Hz
Amplifier 250 Watts built-in Class-D
Maximum output (SPL) 110dB
Low pass filter variable Fixed 250Hz, 2nd-order
Low level signal inputs RCA phono socket
Internal volume 12.7 Litres
Power requirements 100 - 240 V ac ~ 50/60Hz
Power consumption 250VA
Weight 13kg (28.6lbs)
Dimensions
(H x W x D) 380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.
|
System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
External Dimensions excl Stand (H x W x D)
310 x 390 x 160 mm
(12 13/16 x 15 3/8 x 6 5/16 inch)
Weight (each) Excluding stands: 11.9 Kg (26.1 lbs)
|
Dimensions | (Metric) :9-3/16" W x 5-15/16" D x 14-1/2" H | 23.3 x 15.1 x 36.8 cm
Driver Complement :Two 1 inch aluminum dome tweeters; Two 5-1/4 inch high definition bass-midrange drivers
Frequency Response :45 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 - 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One set of 5 way binding posts
Available Finishes :Matte Black
Weight | (Metric) :12 lbs | 11.3 kg
Packaging :Two to a carton
Warranty :5 Years
Accessories :Keyhole Hanging Bracket |
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3-1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator tweeter
Electrical
Overall Frequency Response 45Hz-40kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 30kHZ
Nominal Impedance Compatible with 8 Ohm outputs ohms
Recommended Amplifier Power 20-200 w/channel
Efficiency 83 dB
Crossover Orth Crossover design
Crossover
(mid-high array) 2400Hz
Inputs Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 16-1/4" H x 19-23/25" W x 6-3/4" D
(41.27cm H x 50.60cm W x 17.14cm D)
Mounting Options keyhole slots for wall mounting; pedestal for shelf mounting
Enclosure Type Sealed
Enclosure Type
(subwoofer) PowerPort Bass venting
Shipping/Other
Product Weight 28.90 lbs. (13.11kgs)
Shipping unit: pair
Total Shipping Weight 62.10 lbs. (28.17kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
Frequency Response: C: 55 Hz - 35 KHz L/R: 85Hz - 35KHz Sensitivity (1W@1m): C: 90 dB L/R: 87dB Nominal Impedance: C: 8 Ohms L/R: 8 Ohms Power Handling Single (RMS): C: 100 W L/R: 60 W System Power Handling (RMS): C: 150 W L/R: 100 W Recommended Amplifier Requirements: C: 20 - 150 W L/R: 10 - 100 W Maximum SPL (dBA): 108 Bass Alignment: C: Bass reflex - front ported L/R: Bass reflex - ported to the underside Drive Unit Complement: 4 x 100mm (4“) MMP®II cone bass/mid driver. 3 x 25mm (1“) C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 125 x 985 x 105 mm (4 15/16 x 38 5/8 x 4 1/8) Weight (each): Kg (lbs) 8 (17 5/8) User's Manual
|
Reviews
There are no reviews yet.