ACOUSTIC ENERGY Aelite 2 Bookshelf Loudspeaker 175W -PAIR-Cherry

Power handling (watts): 175 maximum (undistorted programme drive) 
Sensitivity (dB): 90 
Nominal impedance (ohms): 6 
Magnetically shielded
W x H x D (mm): 230 x 450 x 297 
Weight (kg): 9.5 
Frequency response (Hz): 36 - 25,000 
Connections: Gold-plated 4mm banana plugs 
Bass port: Rear-reflex port, low turbulence design 
Drivers: HF: 25mm neodymium tweeter with high dispersion diaphragm. Ferrofluid cooled and damped.
LF: 2 x 110mm mid/bass drivers with 32mm long throw voice coil, die cast chassis , high power, magnet system and lightweight alloy cone 
Supplied accessories: Removable front grilles 
Finish: cherry

Frequency Response: 80 Hz - 35 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance: 8 Ohms
Power Handling Single (RMS): 60 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 10 - 100 W
Maximum SPL (dBA): 105
Bass Alignment: Bass reflex - rear ported
Drive Unit Complement: 1 x 100mm (4“) MMP®II cone mid-bass driver.
1 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 198 x 125 x 140 mm
(7 13/16 x 4 15/16 x 5 1/2)
Weight (each):
Kg (lbs) 2 (4 3/8)

System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 86 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 109.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.3 kHz
Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

300 x 170 x 263 mm
(11 13/16 x 6 11/16 x 10 3/8 inch)
Weight (each) Excluding stands:
7.5 Kg (16.5 lbs)

AVAILABLE IN SIX COLOR FINISHES

Driver Complements
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Areated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Enhanced Ring Radiator Dynamic Balance tweeter
Electrical
Overall Frequency Response 36Hz-40kHz
Lower -3dB Limit 50Hz dB
Upper -3dB Limit 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-200 w/channel
Efficiency 88 dB
Crossover Orth Crossover
Crossover
(mid-high array) 2800HZ
Inputs Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 16 3/4" H x 8" W x 14 9/16" D
(42.55cm H x 20.32cm W x 36.99cm D)
Mounting Options speaker stands or shelf mount
Enclosure Type Sealed
Enclosure Type
(subwoofer) PowerPort bass venting
Shipping/Other
Product Weight 29.60 lbs. (13.43kgs)
Shipping unit: each
Total Shipping Weight 32.50 lbs. (14.74kgs)
Speaker Warranty 5 years parts and labor (original purchaser)

ALSO AVAILABLE IN "EBONY" COLOR

Dimensions | Metric :4-3/4" W x 5" D x 8-3/8" H | 12.1 x 12.7 x 23.8 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 4-1/2" BDSS bass/midrange drivers; One 4-1/2" pressure coupled bass radiator
Frequency Response :57 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 150 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Included Accessories :Tripod Base; Two ¼ 20 insert cover plugs
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket mount(available separately); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 600/800 stand mounting (ProStand 600/800 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :4 lbs | 1.8 kg
Warranty :5 Years

Dimensions | Metric :6-1/4” W x 6-1/2” D x 10-7/8” H | 15.9 x 16.5 x 27.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/4" BDSS bass/midrange drivers; One 5-1/4" pressure coupled bass radiator
Frequency Response :42 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Two ¼ 20 insert cover plugs; Tripod base
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket articulating mount (articulating mount not included); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 1000 stand mounting (ProStand 1000 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :6.5 lbs | 2.9 kg
Warranty :5 Years