ACOUSTIC ENERGY 103 Floorspeaker 3-way walnut (Pair)

The AE103 is a front ported design that allows for easy room positioning.

Behind its angled baffle and magnetic grilles, the AE 103 floorstanding loudspeaker is a front ported design that allows for close to wall placement if desired, making it easier and less fussy to fit within your decor. The result is a loudspeaker with the power and depth of a large floorstanding design, yet with a smaller overall size and more compact footprint than most stand mounted speakers.

Technical Specifications
Tweeter: 28mm AE custom fabric dome
Mid/Bass Drivers: 110mm anodised aluminium cone
Power Handling: 175 watts RMS
Frequency Response: 40Hz – 32kHz (+/- 3dB)
Sensitivity: 89dB
Impedance: 8 Ohm (6 Ohm minimum)
Cabinet: Multiple brace, pressure loaded 18mm MDF with low turbulence slot ports
Weight (Each): 14Kg
Size: 850 x 185 x 280mm (HxWxD)

Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak

System Format:    3 Way Frequency Response:    30 Hz - 60 kHz Sensitivity (1W@1M):    90 dB Nominal Impedance:    8 ohms Maximum S.P.L (Per pair in room):    116.8 dBA Power Handling (RMS):    200 W Recommended Amplifier Requirements (RMS):    100 - 200 W Bass Alignment:    Bass reflex. HiVe port system Crossover Frequency:    L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment:    2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands:    27.2 Kg (59.9 lbs)

Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey

Twin Ported HiVe® II technology
Sealed Mid-range TLE®
2 x 8" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss


Frequency Response: 28 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 118.6 dBA
Power Handling (RMS): 300 W
Recommended Amplifier Requirements (RMS): 100 - 300 W
Bass Alignment: Twin Ported HiVe II Technology
Sealed Mid-range TLE
Mid / H.F Crossover Frequency: 4000 Hz
Bass Low Pass Crossover Frequency: 550 Hz
Driver Unit Complement: 2 x 8" long throw RDT bass drivers
1 x 4" RDT mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Including Fixed Plinth & Feet
(H x W x D): 1113 x 410 x 470 mm
(43 13/16 x 16 1/8 x 18 1/2)
Weight (each) including Plinth:
43.8Kg (96.4lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Dimensions | Metric :42" H x 8" W x 12-1/4" D | 106.7 x 20.3 x 31.1 cm
Driver Complement :Two 1" aluminum dome tweeters; Two 6-1/2" high definition bass/midrange drivers
Frequency Response :20Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of 5 way binding posts
Available Finishes :Piano-Black Gloss
Accessories :Feet; Isolation Spikes
Packaging :One to a carton
Weight | Metric :57 lbs | 25.9 kg
Warranty :5 Years