Content |
Centre Channel Speaker with twin 100mm bass drivers and ferro-fluid hf unit to acoustically match and complement any of the 1000i Series. Can be wall mounted by using the 1000CB wall bracket.
1000Ci SpecificationsEnclosure Type | 2-way reflex | Bass Unit (mm) | 2x100 | Treble Unit (mm) | 25 | Frequency Response (±3dB) | 75Hz - 20kHz | Nominal Impedance (Ohm) | 6 | Minimum Impedance (Ohm) | 4.7 | Sensitivity (2.83v@1m) | 89dB | Recommended Amplifier Power | 25 - 100W | Crossover Frequency (kHz) | 2.8 | Effective Volume (litres) | 5.2 | Cabinet Dimensions (HxDxWmm) | 150 x 195 x 425 | Weight (Kg per cabinet) | 5.5 |
|
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response 90Hz-24kHz
Lower -3dB Limit 125Hz dB
Upper -3dB Limit 20kHz dB
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 91 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 1/4" H x 16 11/16" W x 3 13/16" D
(10.79cm H x 42.39cm W x 9.68cm D)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Non-resonant curved enclosure with time-alinged driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.50 lbs. (2.04kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
System Format: 3 Way Frequency Response: 40 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 113.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 100 - 200 W Bass Alignment: Sealed Cabinet Crossover Frequency: L.F - M.F: 800 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass/mid-range driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 254 x 581 x 333 mm (10 x 22 7/8 x 13 1/8 inch) Weight (each) Excluding stands: 18.9 Kg (41.6lbs) AVAILABLE IN SIX COLOR FINISHES
| Frequency Response +/- 3dB: 50Hz - 35KHz
Sensitivity (1W@1M): 90dB
Driver Compliment: 2 x 140mm (5 1/2“) C-CAM® mid/bass driver with RST® technology.
1 x 25mm (1“) C-CAM® gold dome tweeter.
Nominal Impedance: 8 ohms
Maximum SPL (each): 116.8 dBA
Recommended Amplifier Requirements (RMS): 50 - 200W
Bass Alignment: Bass reflex - twin front mounted Dual HiVE®II ports
Power Handling (RMS): 200W
Crossover Frequency: 600Hz & 3.0kHz
External Dimensions:
(H x W x D) 610 x 140 x 100 mm
24 x 5 1/2 x 3 15/16 inch
Weight (Individual): 6.85kg (15 1/8lbs)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut |
Dimensions | Metric :14-3/4" W x 5" D x 5" H | 37.5 x 12.7 x 12.7 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :47 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Leveler Foot; Two ¼ 20 insert cover plugs
Mounting Options :On Shelf with included leveling foot; Equipped with two ¼ 20 sized threads to accommodate on wall mounting with two ProMount 80 (available separately)
Packaging :One to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years |
Reviews
There are no reviews yet.