Q-ACOUSTICS 1030i 2-Way Floorstanding Speaker Pair

The elegant appearance of this compact, floor-standing loudspeaker is enhanced by an integral aluminium plinth, featuring ʽtop configurableʼ floor spikes for precise, easy adjustment. The class-leading sound quality from its long throw, 165mm bass driver and 25mm polyester weave tweeter can be further optimised by adding sand to the special compartment built into the base of the cabinet.

2 x 6 ½ ¨ Polymer/Mica Cone
with Rubber Surround
1 x 1¨Silk Polymer Composite
Dome
Amplifier Power 20-250 W/ch
Impedance 8 Ohms
Sensitivity 90dB
Dimensions 102 x 22 x 40

ALSO AVAILABLE IN CHERRY COLOR

Dimensions | Metric :6" W x 6" D x 48-1/2" H (with base) | 15.2 x 15.2 x 123.2 cm
Packaging :One to a carton
Height with Base | Metric :48-1/2" | 123.2 cm
Base Dimensions | Metric :10" W x 9-3/4" D | 25.4 x 24.8
Driver Complement :One 1" pure aluminum dome tweeter; Two 5-1/4" high definition midrange drivers; Two 5-1/4" high definition bass drivers; Two 5-1/4" pressure coupled bass radiators
Enclosure :Aircraft grade extruded aluminum
Frequency Response :20 Hz – 30 kHz
Recommended Associated Amplifier Power :20 – 250 watts
Available Finishes :Gloss Black
Weight | Metric :37 lbs | 16.8 kg
Impedance :Compatible with 8 Ohms outputs
Inputs :One pair of 5 way binding posts
Warranty :5 Years
A/V Receiver Crossover Setting :60 Hz
Accessories :Plastic Foot Tippers; Isolation Spikes
Sensitivity :92 dB
Base :Tempered Glass

Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey

System Format:    3 Way Frequency Response:    30 Hz - 60 kHz Sensitivity (1W@1M):    90 dB Nominal Impedance:    8 ohms Maximum S.P.L (Per pair in room):    116.8 dBA Power Handling (RMS):    200 W Recommended Amplifier Requirements (RMS):    100 - 200 W Bass Alignment:    Bass reflex. HiVe port system Crossover Frequency:    L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment:    2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands:    27.2 Kg (59.9 lbs)

If itʼs hard to put the sound of the CM9 into words, thatʼs just as well. This top-of-the-range floorstanding speaker will fill even the largest domestic spaces with music so richly detailed, and so startlingly lifelike, that it will leave you speechless.

The three-way CM9 delivers truly commanding bass with the aid of twin 165mm paper/Kevlar® cone drive units. An FST® driver, with its characteristic compression surround supporting the outer edge of the distinctive Kevlar® cone, is specially developed for outstanding midrange performance. The CM9ʼs Nautilus™ tube-loaded aluminium dome tweeter keeps high frequencies crisp and sharp all the way up to 50kHz and beyond.

The quality of CM Series drive units has made it possible to use minimalist crossovers throughout the whole range. The resulting gentle transition between drivers avoids the unnaturally rapid changes in dispersion that bedevil more complex designs, while the high quality components, carefully chosen after exhaustive listening tests, ensure that as little as possible gets between you and the sound of the original recording.

All CM Series speakers come with aluminium driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, or a highly polished gloss black.

Technical features
    Nautilus™ tube loaded aluminium dome tweeter
    Kevlar® brand fibre cone FST midrange
    Flowport™

Description    3-way vented-box system
Drive units    1x ø25mm (1 in) aluminium dome high-frequency
    1x ø150mm (6 in) woven Kevlar® cone FST midrange
    2x ø165mm (6.5 in) paper/Kevlar® cone bass

Frequency range    -6dB at 30Hz and 50kHz

Frequency response    56Hz - 22kHz ±3dB on reference axis

Dispersion    Within 2dB of reference response
Horizontal:    over 60º arc
Vertical:    over 10º arc
Sensitivity    89dB spl (2.83V, 1m)

Harmonic distortion    2nd and 3rd harmonics (90dB, 1m)