Q-ACOUSTICS 1030i 2-Way Floorstanding Speaker Pair

The elegant appearance of this compact, floor-standing loudspeaker is enhanced by an integral aluminium plinth, featuring ʽtop configurableʼ floor spikes for precise, easy adjustment. The class-leading sound quality from its long throw, 165mm bass driver and 25mm polyester weave tweeter can be further optimised by adding sand to the special compartment built into the base of the cabinet.

Dimensions | Metric :5-7/16" W x 4-1/4" D x 25-1/4" H | 13.8 x 10.8 x 64.1 cm
Height with Base | Metric :26-5/8” | 65.1 cm
Base Dimensions | Metric :8” W x 6” D | 20.3 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :45 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Accessories :Wall bracket; Glass Base
Packaging :One to a carton
Weight | Metric :15 lbs | 6.8 kg
Warranty :5 Years

System Format:    3 Way Frequency Response:    30 Hz - 60 kHz Sensitivity (1W@1M):    90 dB Nominal Impedance:    8 ohms Maximum S.P.L (Per pair in room):    116.8 dBA Power Handling (RMS):    200 W Recommended Amplifier Requirements (RMS):    100 - 200 W Bass Alignment:    Bass reflex. HiVe port system Crossover Frequency:    L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment:    2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands:    27.2 Kg (59.9 lbs)

Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak

1 x 1¨ pure Aluminium Tweeter
2 x 5 ¼ ¨Midrange drivers
1 6x10 long-throw racetrack sub
2 6x10 long-throw racetrack
radiators
Recom. Ampl. Power 20-350 W
Internal Amplifier power 300 watt
Impedance 8 Ohms
Sensitivity 93dB
Dimensions (cm) 130.8x24.1x17.1
Ultra-performance floor-standing
loudspeaker with built-in powered
subwoofers

Driver Complements
Subwoofer 2 - 6" Diameter (15.24cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Ehanced Ring Radiator tweeter
Electrical
Overall Frequency Response 20Hz-40kHz 22Hz-40kHz
Lower -3dB Limit 38Hz dB 42Hz dB
Upper -3dB Limit 30kHz dB 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-300 w/channel 20-250 w/channel
Efficiency 88 dB 88 dB
Crossover Orth Crossover Orth Crossover
Crossover
(mid-high array) 3000Hz 2800Hz
Crossover
(subwoofer) 100HZ 100Hz
Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D
(129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D
(119.38cm H x 21.11cm W x 36.51cm D)
Footprint Size 10 1/2" W x 20 5/16" D
(26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D
(23.50cm W x 41.27cm D)
Mounting Options floor floor
Enclosure Type Sealed Sealed
Enclosure Type
(subwoofer) Dual PowerPort Dual PowerPort bass venting
Shipping/Other
Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs)
Shipping unit: each each
Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs)
Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser)

ALSO AVAILABLE IN "EBONY" COLOR