FBT J8A Active speaker 8″ 250W

400.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: FBT00053 Category:
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W […]

 

Read more

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \’from the ground up\’ in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Processed Active Monitor

200W+ 50W RMS – 124dB SPL

  • 200mm (8’’) custom woofer with improved efficiency and linearity
  • 200Wrms class D amplifier for LF and 50Wrms for HF.
  • Low noise toroidal transformer power supply
  • On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
  • 2 DSP preset for maximum acoustical flexibility
  • Available in white colour 8AW
Code: 37689 / 37906 White
Configuration: 2 way
Built-in amplifier LF/HF: 200/50 W RMS
Built-in amplifier peak LF/HF: 400/100 W
Frequency response: 60Hz – 20KHz -6dB
Low Frequency woofer: 8 – 1.7 coil inch
High Frequency driver: 1 -1 coil inch
Maximum SPL cont/peak: 120/124 dB
Dispersion: 90° x 60° HxV
Input impedance: 22 Kohm
Crossover Frequency: 2.5 KHz
AC Power requirements: 160 VA
Input connector: XLR – jack with loop
Power cord: 5 / 16.4 m/ft
Net Dimension (WxHxD): 255x415x245 – 10.03×16.33×9.64 mm/inch
Net Weight: 8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD): 330x480x320 – 12.99×18.89×12.59 mm/inch
Transport Weight: 9.7 / 21.38 Kg/lb
Weight 9.00 kg

Reviews

There are no reviews yet.

Be the first to review “FBT J8A Active speaker 8″ 250W”

Your email address will not be published. Required fields are marked *

Quick Comparison

FBT J8A Active speaker 8" 250W removeFBT J8AW Active speaker 8" 250W removeRCF ART 708-A MK4 Active 2-way speaker removeELECTRO VOICE zxA1-90B 2 WAY LOUDSPEAKER 800W removeOMNITRONIC C-80 WHITE SPEAKER 2 WAY, 125W, 8'', 8Ω, 90dB removeJB Systems PSA 8 active 120 Watt RMS remove
NameFBT J8A Active speaker 8" 250W removeFBT J8AW Active speaker 8" 250W removeRCF ART 708-A MK4 Active 2-way speaker removeELECTRO VOICE zxA1-90B 2 WAY LOUDSPEAKER 800W removeOMNITRONIC C-80 WHITE SPEAKER 2 WAY, 125W, 8'', 8Ω, 90dB removeJB Systems PSA 8 active 120 Watt RMS remove
Image
SKUFBT00053FBT0005413000321004442C-80 WHITESOSPE302
Rating
Price 400.00 incl. GR VAT 409.00 incl. GR VAT 430.27 incl. GR VAT 577.00 incl. GR VAT 204.00 incl. GR VAT 225.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

In stock

In stock (can be backordered)

Available on backorder

AvailabilityIn stockAvailable on backorderIn stockIn stockIn stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Processed Active Monitor

200W+ 50W RMS - 124dB SPL

  • 200mm (8’’) custom woofer with improved efficiency and linearity
  • 200Wrms class D amplifier for LF and 50Wrms for HF.
  • Low noise toroidal transformer power supply
  • On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
  • 2 DSP preset for maximum acoustical flexibility
  • Available in white colour 8AW
Code: 37689 / 37906 White
Configuration: 2 way
Built-in amplifier LF/HF: 200/50 W RMS
Built-in amplifier peak LF/HF: 400/100 W
Frequency response: 60Hz - 20KHz -6dB
Low Frequency woofer: 8 - 1.7 coil inch
High Frequency driver: 1 -1 coil inch
Maximum SPL cont/peak: 120/124 dB
Dispersion: 90° x 60° HxV
Input impedance: 22 Kohm
Crossover Frequency: 2.5 KHz
AC Power requirements: 160 VA
Input connector: XLR - jack with loop
Power cord: 5 / 16.4 m/ft
Net Dimension (WxHxD): 255x415x245 - 10.03x16.33x9.64 mm/inch
Net Weight: 8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD): 330x480x320 - 12.99x18.89x12.59 mm/inch
Transport Weight: 9.7 / 21.38 Kg/lb

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Processed Active Monitor

200W+ 50W RMS - 124dB SPL

  • 200mm (8’’) custom woofer with improved efficiency and linearity
  • 200Wrms class D amplifier for LF and 50Wrms for HF.
  • Low noise toroidal transformer power supply
  • On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
  • 2 DSP preset for maximum acoustical flexibility
  • Available in white colour 8AW
Code: 37689 / 37906 White
Configuration: 2 way
Built-in amplifier LF/HF: 200/50 W RMS
Built-in amplifier peak LF/HF: 400/100 W
Frequency response: 60Hz - 20KHz -6dB
Low Frequency woofer: 8 - 1.7 coil inch
High Frequency driver: 1 -1 coil inch
Maximum SPL cont/peak: 120/124 dB
Dispersion: 90° x 60° HxV
Input impedance: 22 Kohm
Crossover Frequency: 2.5 KHz
AC Power requirements: 160 VA
Input connector: XLR - jack with loop
Power cord: 5 / 16.4 m/ft
Net Dimension (WxHxD): 255x415x245 - 10.03x16.33x9.64 mm/inch
Net Weight: 8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD): 330x480x320 - 12.99x18.89x12.59 mm/inch
Transport Weight: 9.7 / 21.38 Kg/lb
ART 708-A is a powerful and versatile solution for a variety of needs, ranging from small-to-medium-scale indoor concerts to outdoor stage monitoring. Compact, powerful, and accurately designed to guarantee accurate monitoring and effortless portability, it features a class-D 800 Watt amplifier with innovative DSP sound processing and 8’’ high-power woofer. APPLICATIONS
  • • Nearfield & portable PA
  • • Foreground/background PA, distributed PA, frontfill and sidefill
  • • Houses of worship, video monitoring, retail, clubs, performance theatre, theme parks
  • • Compact voice reinforcement systems
  • • Stage monitoring
General Specs o 127 dB Max SPL o 800 WATT 2-way peak power o 90 x 70, Wide dispersion constant directivity horn o Innovative DSP Processing o 1" Compression Driver, 1.0" v.c. o 8" Woofer o FiRPHASE Technology Acoustical Specs • Frequency Response -3 dB: 60 Hz ÷ 20 Hz • Max SPL: 127 dB • Horizontal coverage angle: 90° • Vertical coverage angle: 70° • Compression Driver: 1“, 1.0" v.c. • Woofer: 8“, 2" v.c. Inputs/Outputs • Input signal: bal / unbal • Input connectors: XLR male, Jack • Output connectors: XLR female • Input sensitivity: -2 dBu / +4 dBu Processor Section • Crossover frequencies: 1600 Hz • Protections: RMS • Limiter: Soft limiter • Controls: Volume, Boost, Mic/Line Amplifier Specifications Total power: 800 W PEAK •  High frequencies: 200 W PEAK •  Low frequencies: 600 W PEAK Total power: 400 W RMS •  High frequencies: 100 W RMS •  Low frequencies: 300 W RMS • Cooling: Convection • Connections: VDE AC socket Cabinet Specs • Cabinet Material: Composite PP • Hardware: 2xM10 flying p. • Handles: 1 top • Pole Mount/Cap: Yes • Colour: Black Size/Weight • Height: 480/18.88 mm/inch • Width: 291/11.44 mm/inch • Depth: 276/10.86 mm/inch • Net Weight: 10.2/22.48 kg/lbs

Input Connections: XLR and TRS Combo; XLR with Independent Gain
- Power Requirement: 120V: 95V - 132V, 50 - 60 Hz, 0.6A; 230V:190V - 264V, 50 - 60 Hz, 0.4A
- Frequency Response: (-3 dB)60 Hz - 20 kHz Hz Full Range Mode
- Frequency Response: (-10 dB) 48 Hz - 20 kHz Hz Full Range Mode
- Recommended High-Pass Frequency: 100Hz (User Selectable)
- Max. SPL/1m (calc): 123 dB
- LF Transducer: EV8L, 203mm (8-inch) Driver
- HF Transducer: DH2005, 25mm (1-inch) Exit Compression Driver
- Crossover Frequency: 1800 Hz
- Enclosure Material: High Impact Polystyrene
- Grill: Polyester Powder Coated, 18GA Galvanized Steel
- Height: 457 mm (17.99 inches)
- Width: 282 mm (11.1 inches)
- Depth: 264 mm (10.39 inches)
- Weight: 8.62 kg (19 lbs)
- Shipping Weight: 10.3 kg (22.7 lbs)

Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc.

- PS 08 but active - Amplifier: 120Wrms (240 Music) - Balanced MIC + LINE input with level control - Balanced LINE outputs - Treble + Bass Master volume control + Technical Data - Amplifier power: 120Wrms / 240Wmusic - Signal / noise rate: 85dB - Micro input: 1.5mV @ 20kΩ - Line input: 1V @ 20kΩ - Tone controls: +/- 12dB @ 100Hz and 10kHz - Frequency response: 70 - 20,000Hz - Woofer: 8 "woofer (20cm) - Compression Driver / Horn: 1 "voice coil - Nominal dispersion: 90 ° x 60 ° (HxV) - Mains Input: 115Vac / 60Hz - 230V AC / 50Hz - Fuse: 250V 3.15A slow blow (20mm glass) - Dimensions: 402 x 294 x 220 mm - Weight: 8kg
Weight9.00 kg9.00 kg10.00 kg10.30 kg7.00 kg8.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 9.00 kg
Weight 9.00 kg
Weight 10.00 kg
Weight 10.30 kg
Weight 7.00 kg
Weight 8.00 kg