PRICE PER UNIT S2X The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials. The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would […]
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: “Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind […] – wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving… […] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. […] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. […] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
Woofer
Number
1
Basket Ø
7.5″ (186 mm)
Voice coil Ø
2″ (50 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2″ (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Panel
Front
Frequency response
35 Hz – 50 kHz
THD > 80 Hz
≤0.8 %
Long term output
≥110 dB
Max. peak
≥120 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
23.8 lb (10,8 kg)
Magnetically shielded
Optional
Height x Width x Depth
14.5″ (370 mm) x 8.5″ (220 mm) x 12.5″ (320 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Weight
11.00 kg
Reviews
There are no reviews yet.
Be the first to review “ADAM S2X Active Studio Monitor 250W” Cancel reply
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: "Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
Woofer
Number
1
Basket Ø
7.5" (186 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Panel
Front
Frequency response
35 Hz - 50 kHz
THD > 80 Hz
≤0.8 %
Long term output
≥110 dB
Max. peak
≥120 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
23.8 lb (10,8 kg)
Magnetically shielded
Optional
Height x Width x Depth
14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
PRICE PER UNIT
A revolutionary formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
Powered bass reflex speakers with 15 watts per side and flat frequency response
Active subwoofer with 50-watt amplifier for increased low end
Front-mounted controls convenient located on right speaker
Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.
A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.
Stereolink
A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.
This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.
Controls and Connectors
The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.
Review: "Highly recommended“
"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“ (Jon Chappell, Harmony Central, 03/10)
Review: "...one of the best compact monitors“
"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)
Mid-Woofer
Number
1
Basket Ø
4.5" (120 mm)
Voice coil Ø
1" (25 mm)
Cone material
Carbon Fiber
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Mid-Woofer
1
Type
A/B
Amp. power RMS / music
25 W / 40 W
Tweeter
1
Type
A/B
Amp. power RMS / music
25 W / 40 W
Control panel
Input Sensitivity
-∞ to +14 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR / RCA
General data
Frequency response
60 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.8 %
Long term output
≥98 dB
Max. peak
≥106 dB
Crossover frequencies
2800 Hz
Input impedance
10 KOhm
Weight
10.1 lb (4,6 kg)
Magnetically shielded
No
Height x Width x Depth
10" (252 mm) x 6" (150 mm) x 7.5" (185 mm)
Warranty
5 Years
Delivery contents
Cinch-cable, Power cord, Manual
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications
Frequency response :
40Hz - 40kHz
Maximum SPL :
115dB SPL (peak @ 1m)
Input :
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
Integral through cancellation magnets or by magnet design
Box :
7-1/2" (19mm) MDF panels
Finish :
Dark red natural veneering side panels, black body
Dimensions (HxWxD) :
9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight :
30.8lb (14kg)
High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer
Ultra-linear studio monitor with true active design
Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
High-precision crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions
Separately controlled limiter for low and high frequency overload protection
Magnetic shielding allows placement near computer monitors
“Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
High-quality components and exceptionally rugged construction ensure long life
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.