ADAM A77X Active Studio Monitor 100W

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
 

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

PRICE PER UNIT

S3X-H - Yes, even better

The S3A is one of ADAMʼs most famous models and is found in many of the most prestigious recording studios all over the world. The successor of this world famous model is the S3X-H, a monitor second to none within its size and price point.

Unlike the S3A, the new X-model incorporates a 4” HexaCone-midrange as part of the redesigned construction to further improve the musically most important midrange. This new design provides more detail with improved radiation characteristics while presenting a musically coherent sound.

To produce deep, tight bass both woofers now work within the same frequency range and radiate symmetrically. This allows for a problem free installation in any multi-channel application.

Reviews: "...the monitor reference...”

Due to the outstanding reputation of its predecessor, it was to be expected that the S3X-H would be reviewed with the most critical of all ears. Here are some samples (complete reviews can be found here):

“The S3X-H convinces all along the line. ADAMs new member is all but just an improvement of a successful monitor. With a new loudspeaker design and painstaking tuning it is a first-class control tool in any studio. From now on, the monitor reference in the Professional audio-studio is called S3X-H.” (Professional audio, 09/2009)

“[...] anyone seeking an uncompromised solution to studio monitoring should add these to your short list of products to consider.” (MIX, 12/2009)

“The S3A is an amazing unit with some excellent technologies, and ADAM hasnʼt just built on this to give us the S3X, but has built something new and exciting with what it knows so well. The sound has been opened up in a whole new way that I believe consistently delivers more reliable results outside of your studio. These are reference monitors, and as they make their way into studios they will become part of the standard called ʽmusic productionʼ. The S3X radiates sound into the room with depth, accuracy, and clarity in the way you need it to be with comfort and ease. These are monitors that need to be heard.” (Audio Media, 09/2009)

PRICE PER UNIT

ADAMs A7 & A7X: the evolution of a legend

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.