ADAM AUDIO T7V Active studio monitor

285.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The T7V is a two-way studio monitor designed for vertical use in a nearfield application. The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The […]

 

Read more

The T7V is a two-way studio monitor designed for vertical use in a nearfield application.

The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The U-ART tweeter is fitted to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series studio monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

On the rear side of the T7V’s beveled cabinet, a rear-firing bass reflex port joins a sturdy metal backplate that’s home to the analog input connections. The U-ART tweeter is powered by a 20 W Class-D amp, while a 50 W Class-D amp serves the woofer. These new powerhouses yield an impressive maximum of 110 dB SPL per pair.

The wide frequency response, high dynamic range, excellent transient response, wide sweet spot and small footprints make the T7V perfectly suited for use in small control rooms for music production, video post-production and broadcast production – a great fit for the modest budgets that many facilities need to work with.

The ADAM Sub8 subwoofer is the perfect match to complement the T7V to extend the capabilities of monitoring in the bottom end.

  • U-ART 1.9” Accelerated Ribbon Tweeter with HPS Waveguide
  • Polypropylene 7” woofer and rear-firing bass-reflex port
  • Cumulated Amp. Power RMS: 70 W
  • Frequency Response: 39 Hz – 25 kHz
  • Max. SPL Per Pair at 1 m: ≥110 dB

Additional Information

Weight 9.0 kg
Dimensions 26.6 x 22.5 x 32.1 cm
Woofer

7″ (178 mm), Polypropylene

Tweeter

1.9″ (48 mm), U-ART
Waveguide: HPS

Built-In Amplifiers

Number 2
Woofer 1
Type PWM
Amp. Power RMS 50 W
Tweeter 1
Type PWM
Amp. Power RMS 20 W

Control Options

Input Sensitivity Switchable +4 dBu / -10 dBV
Gain Yes
High-Shelf – 2 dB, 0 dB, +2 dB
Low-Shelf – 2 dB, 0 dB, +2 dB

Input Connectors

Analog XLR, RCA
Input Impedance 10 kOhm / 20 kOhm

General Data

Panel Rear, Frequency Response 39 Hz – 25 kHz, THD > 80 Hz 0.5 %, Max. SPL per pair at 1 m ≥110 dB, Crossover Frequency 2.6 kHz, Max. Power Consumption 132 W
Weight 15.7 lbs (7.1 kg)
Height x Width x Depth 13.7″ x 8.3″ x 11.5” ( 347 mm x 210 mm x 293 mm)
Warranty 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents Power cord, Quick Start Guide

Weight 10.00 kg

Reviews

There are no reviews yet.

Be the first to review “ADAM AUDIO T7V Active studio monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

ADAM AUDIO T7V Active studio monitor removeSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) removeBEHRINGER B1030A Active studio monito -Unit- removeADAM S2X Active Studio Monitor 250W removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM removeADAM S1X Active Studio Monitor 200W remove
NameADAM AUDIO T7V Active studio monitor removeSAMSON STUDIO GT ACTIVE STUDIO MONITOR GT 2x20W WITH USB (PAIR) removeBEHRINGER B1030A Active studio monito -Unit- removeADAM S2X Active Studio Monitor 250W removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM removeADAM S1X Active Studio Monitor 200W remove
Image
SKUT7VGTE005223S2XMYTHO8S1X
Rating
Price 285.00 incl. GR VAT 204.80 incl. GR VAT 164.00 incl. GR VAT 1,394.99 incl. GR VAT 976.50 incl. GR VAT 930.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The T7V is a two-way studio monitor designed for vertical use in a nearfield application.

The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The U-ART tweeter is fitted to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series studio monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

On the rear side of the T7V’s beveled cabinet, a rear-firing bass reflex port joins a sturdy metal backplate that’s home to the analog input connections. The U-ART tweeter is powered by a 20 W Class-D amp, while a 50 W Class-D amp serves the woofer. These new powerhouses yield an impressive maximum of 110 dB SPL per pair.

The wide frequency response, high dynamic range, excellent transient response, wide sweet spot and small footprints make the T7V perfectly suited for use in small control rooms for music production, video post-production and broadcast production – a great fit for the modest budgets that many facilities need to work with.

The ADAM Sub8 subwoofer is the perfect match to complement the T7V to extend the capabilities of monitoring in the bottom end.

  • U-ART 1.9” Accelerated Ribbon Tweeter with HPS Waveguide
  • Polypropylene 7” woofer and rear-firing bass-reflex port
  • Cumulated Amp. Power RMS: 70 W
  • Frequency Response: 39 Hz – 25 kHz
  • Max. SPL Per Pair at 1 m: ≥110 dB
Additional Information
Weight 9.0 kg
Dimensions 26.6 x 22.5 x 32.1 cm
Woofer

7" (178 mm), Polypropylene

Tweeter

1.9" (48 mm), U-ART
Waveguide: HPS

Built-In Amplifiers

Number 2
Woofer 1
Type PWM
Amp. Power RMS 50 W
Tweeter 1
Type PWM
Amp. Power RMS 20 W

Control Options

Input Sensitivity Switchable +4 dBu / -10 dBV
Gain Yes
High-Shelf – 2 dB, 0 dB, +2 dB
Low-Shelf – 2 dB, 0 dB, +2 dB

Input Connectors

Analog XLR, RCA
Input Impedance 10 kOhm / 20 kOhm

General Data

Panel Rear, Frequency Response 39 Hz – 25 kHz, THD > 80 Hz 0.5 %, Max. SPL per pair at 1 m ≥110 dB, Crossover Frequency 2.6 kHz, Max. Power Consumption 132 W
Weight 15.7 lbs (7.1 kg)
Height x Width x Depth 13.7" x 8.3" x 11.5” ( 347 mm x 210 mm x 293 mm)
Warranty 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents Power cord, Quick Start Guide

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included


High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer

  • Ultra-linear studio monitor with true active design
  • Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
  • Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
  • Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
  • Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
  • High-precision crossover network with 4th order Linkwitz-Riley filters
  • Adjustable to a wide range of acoustic conditions
  • Separately controlled limiter for low and high frequency overload protection
  • Magnetic shielding allows placement near computer monitors
  • “Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany

“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)

“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)

Woofer
Number1
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response35 Hz - 50 kHz
THD > 80 Hz≤0.8 %
Long term output≥110 dB
Max. peak≥120 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight23.8 lb (10,8 kg)
Magnetically shieldedOptional
Height x Width x Depth14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
 

Acoustical Specifications
Frequency Response -3 dB:35 Hz÷ 20 kHz
Max SPL:116 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:8" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1800 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:430/17 mm/inch 
Width:310/12.2 mm/inch 
Depth:300/11.8 mm/inch 
Net Weight:16.150/35.60 Kg/Lbs

 

PRICE PER UNIT

 

S1X

The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.

The smallest reference speaker

The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.

The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.

Woofer
Number1
Basket Ø6" (156 mm)
Voice coil Ø1.5" (37 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music200 W / 280 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)±10 dB
High Shelf EQ > 6 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR
General data
PanelRear
Frequency response40 Hz - 50 kHz
THD > 80 Hz≤1.5 %
Long term output≥103 dB
Max. peak≥113 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight13.2 lb (6 kg)
Magnetically shieldedOptional
Height x Width x Depth11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

 

Weight10.00 kg4.30 kg7.00 kg11.00 kg20.00 kg6.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.00 kg
Weight 4.30 kg
Weight 7.00 kg
Weight 11.00 kg
Weight 20.00 kg
Weight 6.00 kg