ADAM AUDIO T7V Active studio monitor

285.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The T7V is a two-way studio monitor designed for vertical use in a nearfield application. The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The […]

 

Read more

The T7V is a two-way studio monitor designed for vertical use in a nearfield application.

The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The U-ART tweeter is fitted to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series studio monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

On the rear side of the T7V’s beveled cabinet, a rear-firing bass reflex port joins a sturdy metal backplate that’s home to the analog input connections. The U-ART tweeter is powered by a 20 W Class-D amp, while a 50 W Class-D amp serves the woofer. These new powerhouses yield an impressive maximum of 110 dB SPL per pair.

The wide frequency response, high dynamic range, excellent transient response, wide sweet spot and small footprints make the T7V perfectly suited for use in small control rooms for music production, video post-production and broadcast production – a great fit for the modest budgets that many facilities need to work with.

The ADAM Sub8 subwoofer is the perfect match to complement the T7V to extend the capabilities of monitoring in the bottom end.

  • U-ART 1.9” Accelerated Ribbon Tweeter with HPS Waveguide
  • Polypropylene 7” woofer and rear-firing bass-reflex port
  • Cumulated Amp. Power RMS: 70 W
  • Frequency Response: 39 Hz – 25 kHz
  • Max. SPL Per Pair at 1 m: ≥110 dB

Additional Information

Weight 9.0 kg
Dimensions 26.6 x 22.5 x 32.1 cm
Woofer

7″ (178 mm), Polypropylene

Tweeter

1.9″ (48 mm), U-ART
Waveguide: HPS

Built-In Amplifiers

Number 2
Woofer 1
Type PWM
Amp. Power RMS 50 W
Tweeter 1
Type PWM
Amp. Power RMS 20 W

Control Options

Input Sensitivity Switchable +4 dBu / -10 dBV
Gain Yes
High-Shelf – 2 dB, 0 dB, +2 dB
Low-Shelf – 2 dB, 0 dB, +2 dB

Input Connectors

Analog XLR, RCA
Input Impedance 10 kOhm / 20 kOhm

General Data

Panel Rear, Frequency Response 39 Hz – 25 kHz, THD > 80 Hz 0.5 %, Max. SPL per pair at 1 m ≥110 dB, Crossover Frequency 2.6 kHz, Max. Power Consumption 132 W
Weight 15.7 lbs (7.1 kg)
Height x Width x Depth 13.7″ x 8.3″ x 11.5” ( 347 mm x 210 mm x 293 mm)
Warranty 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents Power cord, Quick Start Guide

Weight 10.00 kg

Reviews

There are no reviews yet.

Be the first to review “ADAM AUDIO T7V Active studio monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

ADAM AUDIO T7V Active studio monitor removeADAM S1X Active Studio Monitor 200W removeADAM A8X Active Studio Monitor 150W removeMACKIE HR824mk2 2-Way High Resolution Studio Monitor removeRCF MYTHO 6 ACTIVE TWO-WAY 6.5" DSP MONITORING SYSTEM removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W remove
NameADAM AUDIO T7V Active studio monitor removeADAM S1X Active Studio Monitor 200W removeADAM A8X Active Studio Monitor 150W removeMACKIE HR824mk2 2-Way High Resolution Studio Monitor removeRCF MYTHO 6 ACTIVE TWO-WAY 6.5" DSP MONITORING SYSTEM removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W remove
Image
SKUT7VS1XA8X149.019MYTHO6CMS 50
Rating
Price 285.00 incl. GR VAT 930.00 incl. GR VAT 1,045.00 incl. GR VAT 899.00 incl. GR VAT 861.79 incl. GR VAT 565.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The T7V is a two-way studio monitor designed for vertical use in a nearfield application.

The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The U-ART tweeter is fitted to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series studio monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

On the rear side of the T7V’s beveled cabinet, a rear-firing bass reflex port joins a sturdy metal backplate that’s home to the analog input connections. The U-ART tweeter is powered by a 20 W Class-D amp, while a 50 W Class-D amp serves the woofer. These new powerhouses yield an impressive maximum of 110 dB SPL per pair.

The wide frequency response, high dynamic range, excellent transient response, wide sweet spot and small footprints make the T7V perfectly suited for use in small control rooms for music production, video post-production and broadcast production – a great fit for the modest budgets that many facilities need to work with.

The ADAM Sub8 subwoofer is the perfect match to complement the T7V to extend the capabilities of monitoring in the bottom end.

  • U-ART 1.9” Accelerated Ribbon Tweeter with HPS Waveguide
  • Polypropylene 7” woofer and rear-firing bass-reflex port
  • Cumulated Amp. Power RMS: 70 W
  • Frequency Response: 39 Hz – 25 kHz
  • Max. SPL Per Pair at 1 m: ≥110 dB
Additional Information
Weight 9.0 kg
Dimensions 26.6 x 22.5 x 32.1 cm
Woofer

7" (178 mm), Polypropylene

Tweeter

1.9" (48 mm), U-ART
Waveguide: HPS

Built-In Amplifiers

Number 2
Woofer 1
Type PWM
Amp. Power RMS 50 W
Tweeter 1
Type PWM
Amp. Power RMS 20 W

Control Options

Input Sensitivity Switchable +4 dBu / -10 dBV
Gain Yes
High-Shelf – 2 dB, 0 dB, +2 dB
Low-Shelf – 2 dB, 0 dB, +2 dB

Input Connectors

Analog XLR, RCA
Input Impedance 10 kOhm / 20 kOhm

General Data

Panel Rear, Frequency Response 39 Hz – 25 kHz, THD > 80 Hz 0.5 %, Max. SPL per pair at 1 m ≥110 dB, Crossover Frequency 2.6 kHz, Max. Power Consumption 132 W
Weight 15.7 lbs (7.1 kg)
Height x Width x Depth 13.7" x 8.3" x 11.5” ( 347 mm x 210 mm x 293 mm)
Warranty 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents Power cord, Quick Start Guide

PRICE PER UNIT

 

S1X

The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.

The smallest reference speaker

The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.

The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.

Woofer
Number1
Basket Ø6" (156 mm)
Voice coil Ø1.5" (37 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music200 W / 280 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)±10 dB
High Shelf EQ > 6 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR
General data
PanelRear
Frequency response40 Hz - 50 kHz
THD > 80 Hz≤1.5 %
Long term output≥103 dB
Max. peak≥113 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight13.2 lb (6 kg)
Magnetically shieldedOptional
Height x Width x Depth11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

 

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



Features of the HR824mk2 Studio Reference Monitor:

- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems

 

Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in

 

MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.

Acoustical Specifications
Frequency Response -3 dB:40 Hz÷ 20 kHz
Max SPL:114 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:6.5" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1900 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:370/14.5 mm/inch 
Width:265/10.4 mm/inch 
Depth:250/9.8 mm/inch 
Net Weight:10.5/23 Kg/Lbs

 

The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.

 

Specifications
Frequency response (+/-3dB) : 55Hz - 28kHz
Maximum SPL : 107dB SPL (peak @ 1m)

Input :

Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA

HF amplifier stage : 50W RMS, class AB
LF amplifier stage : 80W RMS, class AB

Electric supply :

Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord

Adjustment :

- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch

Indicators :

Power ON / OFF LED
Standby / ON LED
Audio Clip LED

Woofer : 5" Focal drive unit, Polyglass cone
Tweeter : Aluminum/Magnesium inverted dome Focal tweeter
Shielding : Integral by cancellation magnet
Construction : Reinforced and damped Aluminum cabinet

Finish :

Black powder cabinet

Dimensions with spikes : 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand : 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight : 7.7kg - (17lb)

 

Weight10.00 kg6.00 kg13.00 kg15.00 kg12.00 kg7.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.00 kg
Weight 6.00 kg
Weight 13.00 kg
Weight 15.00 kg
Weight 12.00 kg
Weight 7.70 kg