PRICE PER UNIT ΤΙΜΗ ΤΕΜΑΧΙΟΥ Main Monitors: S6X & S7A Mk2 The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main […]
The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive
concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.
Advanced DʽAppolito-array
The arrangement of the seven discrete drivers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitorʼs new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:
There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible – especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120dB are handled without offending the ear.
Impulse Coupling
In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff Aluminum honeycomb plate (=IC).
Amplifiers
Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies (=PWM).
These are combined in an extremely powerful (1000 and 1500W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs.
The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.
The S6X: accuracy and power
The S6X is one of the most ambitious studio monitors available today. They can be found in some of the highest profile studios in the industry, from elite private studios to world class jazz, from rock and orchestral tracking and mixing facilities to high powered hip hop production rooms. The concept of the horizontal symmetry of the drivers is greatly affected by the generous proportions of the larger diaphragms, resulting in both exceptionally flat frequency response and extremely realistic dynamic reproduction across the entire audio spectrum. Numerous controls at the front panel allow detailed adaptations to different acoustic environments.
This main monitor offers very high accuracy and power in sheer abundance. SPL peaks beyond 120 dB are produced without any compression or harshness. The S6X is a top shelf choice for larger control rooms and film or sound studios.
Control panel (S6X & S7A Mk2)
Numerous controls on the front panel introduce a new degree of control for main monitors. Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200Hz) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.
In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.
Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.
A second switchable input on the front allows servicing without moving the unit.
All LED indicators can be dimmed if necessary.
Subwoofer
Number
2
Basket Ø
12″ (305 mm)
Voice coil Ø
3″ (75 mm)
Cone material
HexaCone
Woofer
Number
2
Basket Ø
7.5″ (186 mm)
Voice coil Ø
2″ (50 mm)
Cone material
HexaCone
Midrange
Number
2
Type
X-ART
Diaphragm area
26 inch² (16800 mm²)
Equiv. Diaphragm Ø
5.5″ (146 mm)
Velocity transform ratio
3.5:1
Diaphragm weight
0.7 g
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2″ (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Subwoofer
2
Type
PWM
Amp. power RMS / music
500 W / 700 W
Woofer
2
Type
PWM
Amp. power RMS / music
250 W / 350 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Control panel
Input Sensitivity
±10 dB
EQ 80 Hz (Quality / Hz / Level)
3 x 0.2 – 20 / 20 – 200 / ±12 dB
High Shelf EQ > 6 kHz
±6 dB
Low Shelf EQ
±6 dB
Sub Gain
±4 dB
Mid-Woofer Level
±2 dB
Mid level
±2 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR
General data
Panel
Front
X-Curve-Filter
yes
Frequency response
23 Hz – 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥123 dB
Max. peak
≥133 dB
Crossover frequencies
85 / 800 / 3100 Hz
Input impedance
10 KOhm
Weight
213.8 lb (97 kg)
Height x Width x Depth
28.5″ (720 mm) x 37″ (940 mm) x 19.5″ (490 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Weight
100.00 kg
Reviews
There are no reviews yet.
Be the first to review “ADAM S6X Active Studio Monitor 500W” Cancel reply
The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive
concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.
Advanced DʽAppolito-array
The arrangement of the seven discrete drivers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitorʼs new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:
There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120dB are handled without offending the ear.
Impulse Coupling
In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff Aluminum honeycomb plate (=IC).
Amplifiers
Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies (=PWM).
These are combined in an extremely powerful (1000 and 1500W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs.
The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.
The S6X: accuracy and power
The S6X is one of the most ambitious studio monitors available today. They can be found in some of the highest profile studios in the industry, from elite private studios to world class jazz, from rock and orchestral tracking and mixing facilities to high powered hip hop production rooms. The concept of the horizontal symmetry of the drivers is greatly affected by the generous proportions of the larger diaphragms, resulting in both exceptionally flat frequency response and extremely realistic dynamic reproduction across the entire audio spectrum. Numerous controls at the front panel allow detailed adaptations to different acoustic environments.
This main monitor offers very high accuracy and power in sheer abundance. SPL peaks beyond 120 dB are produced without any compression or harshness. The S6X is a top shelf choice for larger control rooms and film or sound studios.
Control panel (S6X & S7A Mk2)
Numerous controls on the front panel introduce a new degree of control for main monitors. Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200Hz) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.
In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.
Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.
A second switchable input on the front allows servicing without moving the unit.
All LED indicators can be dimmed if necessary.
Subwoofer
Number
2
Basket Ø
12" (305 mm)
Voice coil Ø
3" (75 mm)
Cone material
HexaCone
Woofer
Number
2
Basket Ø
7.5" (186 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Midrange
Number
2
Type
X-ART
Diaphragm area
26 inch² (16800 mm²)
Equiv. Diaphragm Ø
5.5" (146 mm)
Velocity transform ratio
3.5:1
Diaphragm weight
0.7 g
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Subwoofer
2
Type
PWM
Amp. power RMS / music
500 W / 700 W
Woofer
2
Type
PWM
Amp. power RMS / music
250 W / 350 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Control panel
Input Sensitivity
±10 dB
EQ 80 Hz (Quality / Hz / Level)
3 x 0.2 - 20 / 20 - 200 / ±12 dB
High Shelf EQ > 6 kHz
±6 dB
Low Shelf EQ
±6 dB
Sub Gain
±4 dB
Mid-Woofer Level
±2 dB
Mid level
±2 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR
General data
Panel
Front
X-Curve-Filter
yes
Frequency response
23 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥123 dB
Max. peak
≥133 dB
Crossover frequencies
85 / 800 / 3100 Hz
Input impedance
10 KOhm
Weight
213.8 lb (97 kg)
Height x Width x Depth
28.5" (720 mm) x 37" (940 mm) x 19.5" (490 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications
Frequency response :
40Hz - 40kHz
Maximum SPL :
115dB SPL (peak @ 1m)
Input :
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.