| Content |
Technical drawing
Steel Cable Lid Stay
Wire lid stay - flexible stainless steel wire.
Product type
Hinges and Lidstays
Type
lid stay
Material
Steel
Surface
stainless
Material thickness
2.5 mm
Length
340 mm
Mounting hole diameter
6.5 mm
Detachable
no
Weight
0,013 kg
|
Technical Drawing [44,0 KB]
The SM7DT is a mounting flange with 0° and 5° horizontal tilt for loudspeaker cabinets on speaker stands. Thus, the dispersion of the high frequencies can be controlled and adjusted according to the location. With the 5° tilt, the speaker can be tilted forwards as well as tilted to the rear (depending on the direction of installation of the flange). The flange has a 75 mm installation depth and is made of black powder-coated aluminium and is suitable for a 35 mm tube diameter.
- Product Type: cabinet flange
- Type: mounting flange
- Material: die-cast aluminium
- Surface: powder-coated
- Colour: black
- Suitable for Tube Diameter: 35 mm
- Flange Size: 135 mm x 90 mm
- Installed Depth / Installation Height: 75 mm
- Tiltable: in two increments
- with screw clamp: no
| Cabinet Flange
Top hat
Product type
Speaker Construction Accessories
Type
Cabinet Flange
Material
die-cast aluminium
Surface
Powder coated
Colour
Black
Suitable for tube diameter
35 mm
Flange size
109 mm
Installed depth / installation height
85 mm
Tiltable
no
With screw clamp
no
Weight
0,25 kg
Product type
Speaker Construction Accessories
Type
Cabinet Flange
Material
die-cast aluminium
Surface
Powder coated
Colour
Black
Suitable for tube diameter
35 mm
Flange size
109 mm
Installed depth / installation height
85 mm
Tiltable
no
With screw clamp
no
Weight
0,25 kg
|
Back Plate for Flying Track Extrusions
Thickness of a product: 4 mm
Product weight: 0,380 Kg
Finished: steel
Compatibility with another product: 18001/15 /5720 ADAM HALL
Box dimension: 190x70x4 mm
|
Flying high with safety-cables:
Parcans, speakers, moving heads, mirrorballs, trussing, brackets, projectors, flatscreen monitors, all different products with one thing in common. As soon as they are being used, either static or as moving effect, in elevated positions or over people or crowd you are required to use an independent secondary safety-device according to BGV-C1 and VGB regulations to ensure the safety of the visitors of your venue. Safety-cables need to be used in all these cases to secure your gear and to make sure that, in case of emergency, the secured static equipment does not fall more than 20 cm or, with moving equipment, no more than 5 cm to prevent the impulse forces from becoming too high. Just as important as the safety-cable itself are the chainlinks, carabine-hooks or catbiners because the whole is as strong as its weakest component. That is why our safety-cables are also equipped with certified connectors to guarantee a safe use as long as the cable and the link are handled according to its specifications. Safety-cables can be used single or double stranded to carry and secure their specified load. Please check the specs with each cable to find the cable which matches perfectly to your needs.
One point of attention: safety-cables are meant to secure your gear and not to be used for hoisting equipment. You can use our well-equipped Lodestar-range for this purpose.
Specifications
Length: 50 cm
Diameter: 4 mm
Incl.: Undetachable Carabine hook
Finish: galvanized
SWL: 80 Kg
Safetyfactor: 5:1
Number of strands
x number of wires: 6x19+TK
Tensile grade: 1770N/mm2
| Ergonomic recessed handle, two-piece
Handle consisting of a black plastic dish and a sturdy ring handle made of black powder-coated die-cast zinc. By virtue of the two additional handholds, extremely ergonomic and especially suitable for carrying larger speakers in front of the body.
- Material: plastic / die-cast zinc
- Surface: powder-coated
- Colour: black
- Handle height: 240 mm
- Handle width: 180 mm
- Handle depth: 58 mm
- Cut-out height: 204 mm
- Cut-out width: 144 mm
- Mounting hole dia.: 5 m
|
Reviews
There are no reviews yet.