| Content |
Technical Data - Carrier: PE-coated cloth
- Thickness: 0,19 mm
- Total-Thickness: 0,28 mm
- Length: 25 m
- Width: 19 mm
- Adhesive-base: rubber
- Peel adhesion: 5 N/cm
- Shear adhesion: 6 h/23°C
- Unwind resistance: 3 N/cm
- Tensile strength: 48 N/cm
- Elongation: 10 %
- Temperature-resistance: - 35 °C up to + 80 °C
- UV-resistance: limited
- Weather-resistance: good
- Colour: Neon Yellow
- Core diameter: 76 mm Ø
- Storage life: 24 months (- 18°C/55% RF)
|
B-BM315BK Studiotak BlackMark Black Mat 300m x 15m | LeMark PVC5033BKY perimeter Warning areas PVC Black-Yellow Diagonal Striped Hazard Self Adhesive Tape Roll 50mm x 33m
The Yellow and Black Diagonal Striped Hazard Adhesive Tape Roll is a high visibility self adhesive perimeter tape that is quick, temporary and an effective way to surround or section-off hazard areas, danger zones and construction sites.
This durable tape also withstands severe weather conditions. It is resistant to water, oil, alkali and acid to ensure your ensure your message is not faded, torn or missing.
- ✔ HIGH VISIBILITY - The striking bright yellow makes a great contrast with the bold black color which makes it very noticaeble when entering a hazardous area. Great for For walls, floors, pipes and equipment.
- ✔ SELF-ADHESIVE - The 50mm safety stripe tape has pressure sensitive adhesive. Designed to apply quickly on clean and dry surfaces. It is stretching and conforming around even in curved surfaces and corners.
- ✔ GREAT TENSILE STRENGTH -Tapix safety stripe tape can also be used in packing or even in marking equipment. It is designed to make sure that your items keep in tact and in place.
- ✔ HIGH QUALITY - Tapix Black & Yellow Hazard Warning Safety Stripe Tape is made of high quality vinyl which is very durable, perfect for floor lining. It unrolls quickly and easily tacks into any dry surface.
- ✔ Tapix Brand is known worldwide with superior product quality and service!
Floor Marking
Floor marking tapes can also be useful for helping workers put materials and equipment back in the right place. Creating distinctions between finished goods, raw goods, to-be-repaired goods, and equipment ensures mistakes are minimized and productivity and safety are both at the highest levels.
Highly Adhesive
Tapes are an effective for paints. Tapes are much faster and easier to install and replace, which dramatically reduces down times related to painting aisles and rails. Many floor tapes are scuff and break resistant, unlike paints that will chip and scratch off. And most of all, tapes are much easier to store and transport; they have much higher shelf lives than paints that, if stored improperly, won\'t last long.
Great For Floor Lining
It can be used to mark your facility\'s aisles, walkways, safety hazards, storage areas and more. Aisle and floor marking tapes are made of heavy duty polyester or vinyl that resists oil, moisture, solvents and scuffing - and can even withstand forklift traffic. The marking tape will stick to virtually any dry surface when applied.
Warning
Besides from being used as a warning sign, it can also be used for lining the edges of your floor or putting a mark for a parking space. It is also ideal for bundling heavy items and it will definitely keep intact. It is also moisture, chemical and weather resistant. | BlackTak® Light Masking Foil
Temperature resistant, self-adhesive foil
- Temperature resistant
- Self-adhesive
- Flexible
- Conformable
- Easy to tear
- Backing liner for easy application
Matt Black, Non-Reflective Top Surface
The ultra-discrete, non-reflective top surface minimises reflection from ambient light. This helps BlackTak® Light Masking Foil to go as unnoticed as possible, ideal for professional film, TV and theatre lighting environments.
Temperature Resistant Adhesive
Resistant to temperatures up to 180°C once applied***.
PLEASE NOTE: For best results, we recommend applying to a surface that is smooth, clean, dry, non-porous and free from dust, oil and other contaminants. Stated performance figures and specification are based on average values and should not be regarded as maximum or minimum values. Measurements are approximate. Due to the nature of this product, performance may deteriorate over time. Due to varying application environments, the suggested uses should be considered as a general guide only. We recommend all users assesses the suitability of our products for their individual application and refer to our full technical datasheet before use.
*** Please refer to PDF datasheet for full information | Features/Uses
- Wire and carpet hold down
- Gaffing Lights
- Color coding, marking boxes
- Splice floors
- Bundling wires
- Resists tears and punctures
- 24mm wide x 25m long
- 150 gr
Used for securing and holding artwork, set and stage decoration, audio wire holddown. Also: art, framing and graphics, display and graphics.
Gaffer tape, gaffer\'s tape, gaff tape or gaffa tape is a strong, tough, cotton cloth pressure sensitive tape with strong adhesive properties. It is used in theater, film and television productions as well as during live performances and any other kind of stage work. While related to duct tape, it differs in that it can be removed cleanly because it uses a synthetic rubber adhesive rather than a natural rubber adhesive. The tape is often referred to as a production expendable because it is discarded after the production process is complete. |
B-GELT1225 Studiotak Gel-Tak Filter Fix 12mm x 25m ![geltak_logo.jpg]( "geltak_logo.jpg") ![]() Gel-Tak is a re-positionable tape used to apply color filters to windows and other surfaces for both interior and exterior environments. Made from a high heat resistant double-sided film with an adhesive layer that leaves no residue. Quick and easy to apply and remove during frequent changes or after extended application. Gel-tak Filter Fix Tape has been designed to attach any polyester colour filter to glass or a smooth, clean surface.
It holds fast at a constant service temperature of 80°C (175°F) and, if required, can resist temperatures reaching 200°C (395°F) for a short time.
Gel Tak has a special adhesive which allows the filter to be removed and re-positioned as many times as required, peeling cleanly away from the glass surface every time and leaving no residue or mess.
|
Reviews
There are no reviews yet.