Content |
Product type
Plugs and Connectors
Type
XLR Connectors
Poles
3
Gender
female
Contacts
silver plated
Connection type
solder contacts
Housing
die-cast zinc
Width
26 mm
Height
31 mm
Depth
27 mm
Weight
0,028 kg
Additional information
D-size body
|
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.Suitable for Speakon chassis connectors | B-NE5FX - XLR female extension 5pin
NC5FX | B-NE3-FPD - XLR chassis female 3 pin D-Type |
NC4FX-HD Female heavy duty, metal boot with rubber jacket, water protected, IP65.
TECHNICAL DATA
Electrical Number of contacts: 4 Contact resistance: ? 3 m Insulation resistance - initial: > 2 G - after damp heat test: > 1 G Dielectric strength: 1500 V dc Rated current: 10 A AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF Mechanical Lifetime: >1000 cycles Insertion / withdrawal force: ? 20 N Cable O.D. range: 3.5 mm - 8.0 mm
Materials Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating Shell (male): stainless steel and zinc diecasting combined. Insert: PA 6.6 30% GR (glass reinforced) Contacts: - female: CuSn6 - male: CuZn39Pb3 Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni Latch lock (female): St3K32 Strain-relief clamp: POM Antikink bushing: PUR Sealing jacket: EPDM
Environmental Temperature range: -30° C to + 80° C Flammability: UL 94HB Solderability: complies with IEC 68-2-20 Protection class: IP 65 Compatibility: IEC 61076-2-103 standard | XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB |
Reviews
There are no reviews yet.