Content | Product type
Plugs and Connectors
Type
XLR Connectors
Poles
3
Gender
female
Cable diameter
8 mm
Contacts
silver plated
Connection type
solder contacts
Colour
Black
Housing
die-cast zinc
Strain relief
plastic
Length
70 mm
Diameter
19 mm
Weight
0,018 kg |
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.Suitable for Speakon chassis connectors | B-NE3FX - XLR female extension 3pin |
Female heavy duty, metal boot with rubber jacket, water protected, IP65.
Electrical Specifications:
* Number of contacts: 5 * Contact resistance: = 3 m ohm * Insulation resistance, initial: > 2 G ohm; after damp heat test: > 1 G ohm * Dielectric strength: 1500 V dc * Rated current: 7.5 A * AWG: 2.5 mm²/14 AWG * Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles * Insertion / withdrawal force: = 20 N * Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating * Shell (male): stainless steel and zinc diecasting combined. * Insert: PA 6.6 30% GR (glass reinforced) * Contacts: CuSn6 * Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni * Latch lock (female): St3K32 * Strain-relief clamp: POM * Antikink bushing: PUR * Sealing jacket: EPDM
Environmental Specifications:
* Temperature range: -30° C to + 80° C * Flammability: UL 94HB * Solderability: complies with IEC 68-2-20 * Protection class: IP 65 * Compatibility: IEC 61076-2-103 standard
| These compact, low profile, right angle cable connectors are designed to select
any of 7 positions in 45° increments by rotating the assembled insert into various
indents before securing the back cover. Connector type: XLR male. Shell: Nickel.
Contacts: Silver. Mfg. #NC3MRX. | XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB |
Reviews
There are no reviews yet.