DEFENDER 85103 – CABLE CROSSOVER COMPACT 5 channels

• Fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
• resistant to oil, acids, solvents, and petrol
• Dimensions 80 x 43 x 4 cm
• reliable protection for cables and personnel for indoor and outdoor use
• suitable for higher loads such as forklifts and lifting trucks
• channels with base: 5 channels 22 x 21 cm
• weight with base: 7 kg
• not suitable for vehicular traffic

Attached to the optional 5-channel base the Defender® COMPACT drop-over cable protector transforms into a heavy-duty guard with high load capacity to support trucks, forklifts and other vehicles. The ribbed surface provides excellent traction while integrated connectors on the base and drop-over facilitate lining up to form a rigid continuous protection system. The range of applications includes construction sites, carnivals, fairs, trade shows, exhibitions, warehouses, shopping malls and music events.

 Technical drawing - 85200 [219,8 KB]
 DEFENDER Laser engraving requirements [289,3 KB]
 DEKRA Certificate [3,70 MB]
 Users Manual - Defender Series [19,77 MB]

Small but sturdy. Light, professional and universally applicable, with the familiar black and yellow design. The new Defender Mini meets every expectation for professional cable protection, expanding the Defender series with a very light (only 5 kg!), compact cable crossover, capable of supporting vehicle traffic.

Featuring three cable ducts and a cable cross-section of 35 mm², with an overall height of 48 mm, although used primarily indoors, this crossover can readily support car traffic, due to the load-bearing capacity of more than 2 tons.The bottom of the Defender Mini has a non-slip surface, to ensure an optimal grip on the widest variety of surfaces. Like all of the Defender series crossovers, the Defender Mini is resistant to oils, acids, and petrol, and has a patented self-cleaning hinged closure.

• Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
• Length: 100 cm
• Width: 29 cm
• Height: 4.8 cm
• Channels: 3
• Width Channels: 35 mm
• Height Channels: 30 mm, 35 mm, 30 mm
• Material: PU (polyurethane)
• Shore A hardness: 88 ± 4
• Flammability class: B2 
• Operating temperature: -30°C to +60°C
• Load-bearing capacity: approx. 2 tons, for a surface area of 20 cm x 20 cm
• DEKRA certified - Certified product safety
• Weight 4,65 Kg
  

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.

Feel free to contact us for more information.

End Ramp for 85160 Cable Duct 4-channel

End ramp for Defender Office

The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.

• 90° curve for Defender Office
• Colour: Jellow
• Channels: 4
• Channels: 10 mm, 12 mm, 12 mm, 10 mm
• Material: Polyurethane
• Fire protection classification: B1

  DEKRA Certificate [3,70 MB]

   Users Manual - Defender Series [19,77 MB]

 Technical drawing - 85002 [356,1 KB]
 Technical Inspection Agency report [655,3 KB]
 DEFENDER Laser engraving requirements [289,3 KB]
 DEKRA Certificate [3,70 MB]
 Users Manual - Defender Series [19,77 MB]

Cable Crossover with lid load bearing capacity per typical tyre imprint (20 x 20 cm): 5 tons. Crossover lengths are joined by individually available connector plugs. Each crossover is supplied with one pair of connector plugs. The lid closes down onto a patented "interlock zipper" (EU Patent No.: EP1366550) which is moulded into the base and lid - no Velcro to tear off or clog with dirt. A complete range of accessories expands the Defender III into a flexible system to protect your cables and multicores.

• Basic module with approved and patented interlocking lid
• Lenght: 100 cm
• Width: 60 cm
• Height: 7.3 cm
• Channels: 3
• Width (Channels): 52 mm, 45 mm, 56 mm
• Height (Channels): 49 mm, 50 mm, 49 mm
• Flame Class: B2 
• Load bearing: Approx 5 tons per typical tyre imprint (20 x 20 cm)
• The Cable-Crossover is oil, acid & petrol resistant
• Operating Range: -30°C up to +60°C
• DEKRA certified - Certified product safety
• 2 connector plugs included

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.

Feel free to contact us for more information.

• Fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
• resistant to oil, acids, solvents, and petrol
• Dimensions 80 x 43 x 4 cm
• reliable protection for cables and personnel for indoor and outdoor use
• suitable for higher loads such as forklifts and lifting trucks
• channels with base: 5 channels 22 x 21 cm
• weight with base: 7 kg
• not suitable for vehicular traffic

Attached to the optional 5-channel base the Defender® COMPACT drop-over cable protector transforms into a heavy-duty guard with high load capacity to support trucks, forklifts and other vehicles. The ribbed surface provides excellent traction while integrated connectors on the base and drop-over facilitate lining up to form a rigid continuous protection system. The range of applications includes construction sites, carnivals, fairs, trade shows, exhibitions, warehouses, shopping malls and music events.