Content |
Defender Brochure TÜV report User's manual
Defender Nano LUX Cable Protector 6-channel LUX
- Especially flat, non-slip cable crossover made of black, recyclable polyurethane, wheelchair-compatible
- Highly transparent yellow-tinted lid for use in the dark with light tubes
- Yellow polyethylene lid with high warning effect and secure closure (also available with black lid, item N° 85150BLK)
- Patented, self-cleaning lid hinge
- 6 channels 17 x 18 mm
- Load bearing capacity approx. 2 t / 20 cm²
- Fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- Resistant to oil, acids, solvents, and petrol
- Dimensions 100 x 28 x 3.2 cm; Weight 4.37 kg
- Reliable protection for cables and personnel for indoor and outdoor use
- Not suitable for road traffic.
- End ramps for secure cable insertion and removal as accessories
The ultimate solution for protecting your cables and for preventing people from tripping. The innovative cable crossovers from the Defender LUX Series have highly transparent, yellow-tinted lids, where LED light tubes can be inserted parallel to cables and other pipes. Defender LUX cable crossovers have been developed in collaboration with event organisers and operators of large halls and festival venues according to the latest state-of-the-art technology and also ensure the highest possible level of safety and visibility in the dark, both indoors and outdoors. LED light tubes from the Defender Series are available as separate accessories. For more information, please refer to our price list for Defender LUX cable crossovers and light tubes, or contact your Defender representative directly.
Cable Protector 6 Channels
Defender® NANO cable crossovers are particularly flat and are easy to cross with a wheelchair. They are suitable for a wide range of indoor and outdoor applications and are available with either a yellow or black lid. These cable crossovers boast 6 cable channels for neat, orderly cable routing, T-connectors and a load capacity of 2 tonnes on an area of 20 x 20 cm, and besides pedestrian traffic, they also allow accommodate driving with light-duty vehicles, trolleys and - thanks to their flat profile - even forklift trucks and lift trucks. Separately available end ramps (male/female) ensure safe insertion and removal of cables. Defender NANO cable crossovers can be used in carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.
Defender LUX cable crossovers can be used with commercially available light tubes. Light tubes with a so-called neon effect are especially recommended since the individual LEDs are less visible and this provides for particularly homogeneous lighting. For outdoor use, please mind the appropriate IP classification of the light tube. The use of LED strips and other unidirectional light-emitting products or fairy lights is not recommended.
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.
Product type
Cable Protectors
Type
6 Channels
Length
1000 mm
Width
280 mm
Height
32 mm
Channels
6
Width channel 1
17 mm
Height channel 1
18 mm
Width channel 2
17 mm
Height channel 2
18 mm
Width channel 3
17 mm
Height channel 3
19 mm
Width channel 4
17 mm
Height channel 4
19 mm
Width channel 5
17 mm
Height channel 5
18 mm
Width channel 6
17 mm
Height channel 6
18 mm
Material
polyurethane
Max. load
ca. 2t on a surface area of 20 x 20 cm
Chemical resistance
acid-resistant , oil-resistant , petrol-resistant
Hardness range
88 ± 4 Shore
Fire protection class
B2
Temperature range
-30 to + 60 °C
Weight
4,37 kg
Special feature
DEKRA-certified
|
Defender Office BLACK
Cable Duct 4-channel black
Data Sheet
Dekra Certificate
Technical Drawing
Defender Brochure
User's manual
- non-slip, ultra-flat cable protector made of recyclable polyurethane for indoors
- zigzag connector system, pre-drilled mounting holes, cutting guides for shortening
- 4 channels: 2 channels each 10 x 10 mm and 12 x 12 mm
- complies with German workplace accident prevention regulations (§ 3 A1 ArbStättV)
- fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- resistant to oil, acids, solvents, and petrol
- dimensions 87 x 12 x 2 cm; Weight 1.24 kg
- reliable protection for cables and personnel
- available in black (Item No. 85160), grey (Item No. 85160GREY) and yellow (Item No. 85160YEL)
- Curves and end ramps for flexible cable protection are available as accessories
Office black
4 Mini Channels - Indoor & Design Solution Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.
Product type
Cable Protectors
Type
4 Channels
Length
870 mm
Width
120 mm
Height
21 mm
Channels
4
Width channel 1
10 mm
Height channel 1
10 mm
Width channel 2
12 mm
Height channel 2
12 mm
Width channel 3
12 mm
Height channel 3
12 mm
Width channel 4
10 mm
Height channel 4
10 mm
Material
polyurethane
Max. load
Office crossover
Fire protection class
B1
Weight
1,24 kg
Special feature
DEKRA-certified
|
Technical drawing - 85600 [209,5 KB]
Technical Inspection Agency report [655,3 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
The latest development in the Defender cable crossover series. This cable crossover
was developed in collaboration with suppliers for major events. The key feature of this
heavy-duty crossover is the two oversized cable/hose ducts for lines up to 120 mm,
and for fragile connections and connector housings not exceeding 100 mm.
Weight: approx. 25 kg to 27 kg
This cable crossover was developed in collaboration with suppliers for major events. The key feature of this heavy-duty crossover is the two oversized cable / hose ducts for lines up to 120 mm, and for fragile connections and connector housings not exceeding 100 mm.
By usage in public traffic, please consider your country-specific road traffic regulations. - Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Lenght: 70 cm
- Width: 78.3 cm
- Height: 13.9 cm
- Channels: 2 + 2
- Material: PU (Polyurethane)
- Degree of Hardness: 88 Shore ± 4 A
- Flame Class: B2
- Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- Operating Range: -30°C up to +60°C
- DEKRA certified - Certified product safety
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
|
Defender 'Midi' cable crossover end ramp |
End Ramp for 85160 Cable Duct 4-channel
End ramp for Defender Office
The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.
Product type
Cable Protector Accessories
Type
End Pieces
Material
polyurethane
Colour
Black
Length
90 mm
Weight
0,078 kg
|
User's manual Defender Brochure
- The standard for event technology, industry and all public applications
- Heavy duty non-slip all-round cable protectors made out of black, recyclable polyurethane with integrated carrying handles
- Yellow polyethylene cover with high warning effect and secure locking
- Patented self-cleaning hinged cover
- 4 channels: 1 channel 80 x 36 mm (for C-pressure hoses) and 3 channels 34 x 36 mm
- Load capacity approximately 5 t/20 cm²
- Fire protection class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- Resistant to oil, acid, petrol and short-term contact with solvents
- Dimensions 87 x 54.2 x 5.2 cm; weight 11.5 kg
- Reliable cable, hose and personal protection for indoor and outdoor use
- End caps for safe cable entry and exit available as accessories
The Defender Midi cable protection was developed as a solution for applications between the Defender Mini and Defender III and has established itself as the standard for the industry and event technology on the market.
The cable protection Midi 4C differs from the previous midi only in the number of channels. Instead of five equal-sized channels, the Midi 4C has 4 channels with one channel twice as wide. This wider channel allows the insertion of significantly thicker cables than with the standard Midi cable crossover. Even a Fire hose can be carried out by the Midi 4C.
Product type
Cable Protectors
Type
4 Channels
Length
870 mm
Width
542 mm
Height
52 mm
Channels
4
Width channel 1
34 mm
Height channel 1
36 mm
Width channel 2
34 mm
Height channel 2
36 mm
Width channel 3
34 mm
Height channel 3
36 mm
Width channel 4
80 mm
Height channel 4
36 mm
Material
Polyurethane
Max load
approx. 5t on a surface area of 20 x 20 cm
Chemical resistance
acid-resistant , oil-resistant , Petrol-resistant , Short-term contact with solvents
Hardness range
88 Shore ± 4 A Shore
Fire protection class
B2
Temperature range
-30°C to 60°C °C
Weight
11,8 kg
Special feature
DEKRA-certified
Label your cable crossovers!
Customise the Defender cable crossovers with your company logo for orders ex 30 pieces. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information. |
Reviews
There are no reviews yet.