Content |
Defender Office BLACK
Cable Duct 4-channel black
Data Sheet
Dekra Certificate
Technical Drawing
Defender Brochure
User's manual
- non-slip, ultra-flat cable protector made of recyclable polyurethane for indoors
- zigzag connector system, pre-drilled mounting holes, cutting guides for shortening
- 4 channels: 2 channels each 10 x 10 mm and 12 x 12 mm
- complies with German workplace accident prevention regulations (§ 3 A1 ArbStättV)
- fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- resistant to oil, acids, solvents, and petrol
- dimensions 87 x 12 x 2 cm; Weight 1.24 kg
- reliable protection for cables and personnel
- available in black (Item No. 85160), grey (Item No. 85160GREY) and yellow (Item No. 85160YEL)
- Curves and end ramps for flexible cable protection are available as accessories
Office black
4 Mini Channels - Indoor & Design Solution Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.
Product type
Cable Protectors
Type
4 Channels
Length
870 mm
Width
120 mm
Height
21 mm
Channels
4
Width channel 1
10 mm
Height channel 1
10 mm
Width channel 2
12 mm
Height channel 2
12 mm
Width channel 3
12 mm
Height channel 3
12 mm
Width channel 4
10 mm
Height channel 4
10 mm
Material
polyurethane
Max. load
Office crossover
Fire protection class
B1
Weight
1,24 kg
Special feature
DEKRA-certified
|
Technical drawing - 85002 [356,1 KB]
Technical Inspection Agency report [655,3 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Cable Crossover with lid load bearing capacity per typical tyre imprint (20 x 20 cm): 5 tons. Crossover lengths are joined by individually available connector plugs. Each crossover is supplied with one pair of connector plugs. The lid closes down onto a patented "interlock zipper" (EU Patent No.: EP1366550) which is moulded into the base and lid - no Velcro to tear off or clog with dirt. A complete range of accessories expands the Defender III into a flexible system to protect your cables and multicores.
- Basic module with approved and patented interlocking lid
- Lenght: 100 cm
- Width: 60 cm
- Height: 7.3 cm
- Channels: 3
- Width (Channels): 52 mm, 45 mm, 56 mm
- Height (Channels): 49 mm, 50 mm, 49 mm
- Flame Class: B2
- Load bearing: Approx 5 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- Operating Range: -30°C up to +60°C
- DEKRA certified - Certified product safety
- 2 connector plugs included
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
|
Technical drawing - 85600 [209,5 KB]
Technical Inspection Agency report [655,3 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
The latest development in the Defender cable crossover series. This cable crossover
was developed in collaboration with suppliers for major events. The key feature of this
heavy-duty crossover is the two oversized cable/hose ducts for lines up to 120 mm,
and for fragile connections and connector housings not exceeding 100 mm.
Weight: approx. 25 kg to 27 kg
This cable crossover was developed in collaboration with suppliers for major events. The key feature of this heavy-duty crossover is the two oversized cable / hose ducts for lines up to 120 mm, and for fragile connections and connector housings not exceeding 100 mm.
By usage in public traffic, please consider your country-specific road traffic regulations. - Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Lenght: 70 cm
- Width: 78.3 cm
- Height: 13.9 cm
- Channels: 2 + 2
- Material: PU (Polyurethane)
- Degree of Hardness: 88 Shore ± 4 A
- Flame Class: B2
- Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- Operating Range: -30°C up to +60°C
- DEKRA certified - Certified product safety
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
|
User's manual Defender Brochure
- The standard for event technology, industry and all public applications
- Heavy duty non-slip all-round cable protectors made out of black, recyclable polyurethane with integrated carrying handles
- Yellow polyethylene cover with high warning effect and secure locking
- Patented self-cleaning hinged cover
- 4 channels: 1 channel 80 x 36 mm (for C-pressure hoses) and 3 channels 34 x 36 mm
- Load capacity approximately 5 t/20 cm²
- Fire protection class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- Resistant to oil, acid, petrol and short-term contact with solvents
- Dimensions 87 x 54.2 x 5.2 cm; weight 11.5 kg
- Reliable cable, hose and personal protection for indoor and outdoor use
- End caps for safe cable entry and exit available as accessories
The Defender Midi cable protection was developed as a solution for applications between the Defender Mini and Defender III and has established itself as the standard for the industry and event technology on the market.
The cable protection Midi 4C differs from the previous midi only in the number of channels. Instead of five equal-sized channels, the Midi 4C has 4 channels with one channel twice as wide. This wider channel allows the insertion of significantly thicker cables than with the standard Midi cable crossover. Even a Fire hose can be carried out by the Midi 4C.
Product type
Cable Protectors
Type
4 Channels
Length
870 mm
Width
542 mm
Height
52 mm
Channels
4
Width channel 1
34 mm
Height channel 1
36 mm
Width channel 2
34 mm
Height channel 2
36 mm
Width channel 3
34 mm
Height channel 3
36 mm
Width channel 4
80 mm
Height channel 4
36 mm
Material
Polyurethane
Max load
approx. 5t on a surface area of 20 x 20 cm
Chemical resistance
acid-resistant , oil-resistant , Petrol-resistant , Short-term contact with solvents
Hardness range
88 Shore ± 4 A Shore
Fire protection class
B2
Temperature range
-30°C to 60°C °C
Weight
11,8 kg
Special feature
DEKRA-certified
Label your cable crossovers!
Customise the Defender cable crossovers with your company logo for orders ex 30 pieces. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information. |
Defender XXL heavy duty cable and hose crossover Length: 75,00 cm Width: 70,00 cm
Height: 90 mm Channels: 5 Weight: 21,40 kg Material: PU (Polyurethane) Load bearing:
Approx 6 tons per typical tyre imprint (20x20 cm) The Cable-Crossover is oil, acid &
petrol resistant
Technical drawing - 85500 [178,5 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Together with the industry and leading rental companies we have developed our new flagship of the Defender series. 5 huge cable ducts, 3 of them are suitable for C-Tube hose as used by the fire brigade (Ø 62 mm). Power cables also have optimum protection. The load bearing actually surpasses the Defender III at more than 5 tons.
By usage in public traffic, please consider your country-specific road traffic regulations. - Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Length: 70.00 cm (with connectors 75,00)
- Width: 69.60 cm
- Height: 8.7 cm
- Channels: 5
- Width (Channels): 6,1 cm, 6,2 cm, 6,0 cm, 6,2 cm, 6,1 cm
- Height (Channels): 5,9 cm, 6,5 cm, 6,3 cm, 6,5 cm, 5,9 cm
- Material: PU (Polyurethane)
- Degree of Hardness: 88 Shore ± 4 A
- Flame Class: B2)
- Operating Range: -30°C up to +60°C
- Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- DEKRA certified - Certified product safety
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
|
- Fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- resistant to oil, acids, solvents, and petrol
- Dimensions 80 x 43 x 4 cm
- reliable protection for cables and personnel for indoor and outdoor use
- suitable for higher loads such as forklifts and lifting trucks
- channels with base: 5 channels 22 x 21 cm
- weight with base: 7 kg
- not suitable for vehicular traffic
Defender® Compact with Base
Attached to the optional 5-channel base the Defender® COMPACT drop-over cable protector transforms into a heavy-duty guard with high load capacity to support trucks, forklifts and other vehicles. The ribbed surface provides excellent traction while integrated connectors on the base and drop-over facilitate lining up to form a rigid continuous protection system. The range of applications includes construction sites, carnivals, fairs, trade shows, exhibitions, warehouses, shopping malls and music events.
Product type
Cable Protector Accessories
Type
5-channel , Bases
Length
804 mm
Height
37 mm
Width
241 mm
Channels
5
Width channel 1
22 mm
Height channel 1
21 mm
Width channel 2
22 mm
Height channel 2
21 mm
Width channel 3
22 mm
Height channel 3
21 mm
Width channel 4
22 mm
Height channel 4
21 mm
Width channel 5
22 mm
Height channel 5
21 mm
Material
polyurethane
Max. load
Fork lift, lifting truck
Chemical resistance
acid-resistant , oil-resistant , petrol-resistant
Weight
2,031 kg
Special feature
DEKRA-certified
|
Reviews
There are no reviews yet.