Content |
Technical drawing - 85200 [219,8 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Small but sturdy. Light, professional and universally applicable, with the familiar black and yellow design. The new Defender Mini meets every expectation for professional cable protection, expanding the Defender series with a very light (only 5 kg!), compact cable crossover, capable of supporting vehicle traffic.
Featuring three cable ducts and a cable cross-section of 35 mm², with an overall height of 48 mm, although used primarily indoors, this crossover can readily support car traffic, due to the load-bearing capacity of more than 2 tons.The bottom of the Defender Mini has a non-slip surface, to ensure an optimal grip on the widest variety of surfaces. Like all of the Defender series crossovers, the Defender Mini is resistant to oils, acids, and petrol, and has a patented self-cleaning hinged closure.
- Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Length: 100 cm
- Width: 29 cm
- Height: 4.8 cm
- Channels: 3
- Width Channels: 35 mm
- Height Channels: 30 mm, 35 mm, 30 mm
- Material: PU (polyurethane)
- Shore A hardness: 88 ± 4
- Flammability class: B2
- Operating temperature: -30°C to +60°C
- Load-bearing capacity: approx. 2 tons, for a surface area of 20 cm x 20 cm
- DEKRA certified - Certified product safety
- Weight 4,65 Kg
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
|
End Ramp for 85160 Cable Duct 4-channel
End ramp for Defender Office
The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.
Product type
Cable Protector Accessories
Type
End Pieces
Material
polyurethane
Colour
Black
Length
90 mm
Weight
0,078 kg
|
Technical Drawing [194,5 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Defender Ultra L 2 - Cable Protector 2+4-channels
2 extra large cable crossovers- the heavy duty giant
Defender® Ultra L 2 - heavy duty cable crossovers are designed for the most demanding applications and feature two extra large cable channels of 108 x 110 mm plus four channels with 25 mm diameter and integrated connector plugs for easy coupling of several elements. The load bearing capacity is approx. 5 tons on a 20 x 20 cm surface area. Therefore, Ultra L 2 cable crossovers are the ideal solution for heavy traffic, construction sites, warehouses, trade shows, carnivals and music events, and other applications involving particularly heavy use.. They are equipped with all essential fixation holes for street installation.
Please observe your national road traffic regulations for use on public roads.
Label your cable crossovers! All Defender cable protectors are available customised with your company logo" minimum order just 30 units per model. The format requirements are available in the download area.
Contact us for further information.
Specifications:
- Product type: cable crossover
- Type: 2-channel
- Length: 700 mm
- Width: 766 mm
- Height: 120 mm
- Number of channels: 2 + 4
- Diameter channel 1+2: 25 mm
- Diameter channel 5+6: 25 mm
- Width channel 3: 108 mm
- Height channel 3: 110 mm
- Width channel 4: 108 mm
- Height channel 4: 110 mm
- Material: polyurethane
- Load capacity: approx. 5 t on a 20 x 20 cm surface area
- Chemical cesistance: petrol, oil-resistant, acid-resistant
- Hardness range: 88 ± 4 Shore
- Fire protection Class: B2
- Temperature range: - 30° to 60 °C
- Weight: 28.295 kg
- Special features: DEKRA certified, 4 fixation holes for street mounting with 10mm Ø.
|
Defender Office YELLOW
Cable Duct 4-channel yellow
Data Sheet
Dekra Certificate
Technical Drawing
Defender Brochure
User's manual
- non-slip, ultra-flat cable protector made of recyclable polyurethane for indoors
- zigzag connector system, pre-drilled mounting holes, cutting guides for shortening
- 4 channels: 2 channels each 10 x 10 mm and 12 x 12 mm
- complies with German workplace accident prevention regulations (§ 3 A1 ArbStättV)
- fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- resistant to oil, acids, solvents, and petrol
- dimensions 87 x 12 x 2 cm; Weight 1.24 kg
- reliable protection for cables and personnel
- available in black (Item No. 85160), grey (Item No. 85160GREY) and yellow (Item No. 85160YEL)
- Curves and end ramps for flexible cable protection are available as accessories
Office YELLOW
4 Mini Channels - Indoor & Design Solution Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.
Product type
Cable Protectors
Type
4 Channels
Length
870 mm
Width
120 mm
Height
21 mm
Channels
4
Width channel 1
10 mm
Height channel 1
10 mm
Width channel 2
12 mm
Height channel 2
12 mm
Width channel 3
12 mm
Height channel 3
12 mm
Width channel 4
10 mm
Height channel 4
10 mm
Material
polyurethane
Max. load
Office crossover
Fire protection class
B1
Weight
1,24 kg
Special feature
DEKRA-certified
|
Technical drawing - 85002 [356,1 KB]
Technical Inspection Agency report [655,3 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Cable Crossover with lid load bearing capacity per typical tyre imprint (20 x 20 cm): 5 tons. Crossover lengths are joined by individually available connector plugs. Each crossover is supplied with one pair of connector plugs. The lid closes down onto a patented "interlock zipper" (EU Patent No.: EP1366550) which is moulded into the base and lid - no Velcro to tear off or clog with dirt. A complete range of accessories expands the Defender III into a flexible system to protect your cables and multicores.
- Basic module with approved and patented interlocking lid
- Lenght: 100 cm
- Width: 60 cm
- Height: 7.3 cm
- Channels: 3
- Width (Channels): 52 mm, 45 mm, 56 mm
- Height (Channels): 49 mm, 50 mm, 49 mm
- Flame Class: B2
- Load bearing: Approx 5 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- Operating Range: -30°C up to +60°C
- DEKRA certified - Certified product safety
- 2 connector plugs included
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
|
Defender 'Midi' cable crossover end ramp |
Reviews
There are no reviews yet.