DEFENDER 85305SET Wheelchair Ramp – Ramp Module Set

827.39 incl. GR VAT

Available on backorder

EAN: 4049521078590
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: 85305SET Category:
Defender Wheelchair Ramp with 3 Lines (6 ramp pieces), matching extremity pieces and the blue pre-drilled Defender Midi cable crossover. Professional cable protection combined with a practical solution to make the Defender MIDI cable crossovers suitable for wheelchairs, walking frames and trolleys. As it is the case with all crossovers of the DEFENDER series, the […]

 

Read more

Defender Wheelchair Ramp with 3 Lines (6 ramp pieces), matching extremity pieces and the blue pre-drilled Defender Midi cable crossover.

Professional cable protection combined with a practical solution to make the Defender MIDI cable crossovers suitable for wheelchairs, walking frames and trolleys.

As it is the case with all crossovers of the DEFENDER series, the Defender Wheelchair ramp is oil, acid, and petrol resistant.

We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.

The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.

DEKRA certified – Certified product safety

1 Set is composed of:

  • 6 Ramp pieces (3 Lines)
  • 4 extremity pieces (2 left extremities / 2 right extremities)
  • 1 blue pre-drilled Midi cable crossover

Please note:

  • The Defender Wheelchair Ramp does not support vehicle traffic.

Configuration – Defender Wheel Chair Ramp [294,1 KB]

 

DEKRA Certificate [3,70 MB]


Users Manual – Defender Series [19,77 MB]

Weight 30.70 kg

Reviews

There are no reviews yet.

Be the first to review “DEFENDER 85305SET Wheelchair Ramp – Ramp Module Set”

Your email address will not be published. Required fields are marked *

Quick Comparison

DEFENDER 85305SET Wheelchair Ramp - Ramp Module Set removeDEFENDER 85160GREY Office - Cable Crossover 4-channels grey removeDEFENDER 85004 - DEFENDER III JOINING PIECE removeDEFENDER 85600 - DEFENDER ULTRA L CABLE CROSSOVER removeDEFENDER 85002 - Defender 3 CABLE CROSSOVER removeDEFENDER 85103 - CABLE CROSSOVER COMPACT 5 channels remove
NameDEFENDER 85305SET Wheelchair Ramp - Ramp Module Set removeDEFENDER 85160GREY Office - Cable Crossover 4-channels grey removeDEFENDER 85004 - DEFENDER III JOINING PIECE removeDEFENDER 85600 - DEFENDER ULTRA L CABLE CROSSOVER removeDEFENDER 85002 - Defender 3 CABLE CROSSOVER removeDEFENDER 85103 - CABLE CROSSOVER COMPACT 5 channels remove
Image
SKU85305SET85160GREY85004856008500285103
Rating
Price 827.39 incl. GR VAT 35.59 incl. GR VAT 29.33 incl. GR VAT 351.25 incl. GR VAT 291.75 incl. GR VAT 69.07 incl. GR VAT
Stock

Available on backorder

In stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderIn stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Defender Wheelchair Ramp with 3 Lines (6 ramp pieces), matching extremity pieces and the blue pre-drilled Defender Midi cable crossover.

Professional cable protection combined with a practical solution to make the Defender MIDI cable crossovers suitable for wheelchairs, walking frames and trolleys.

As it is the case with all crossovers of the DEFENDER series, the Defender Wheelchair ramp is oil, acid, and petrol resistant.

We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.

The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.

DEKRA certified - Certified product safety

1 Set is composed of:

  • 6 Ramp pieces (3 Lines)
  • 4 extremity pieces (2 left extremities / 2 right extremities)
  • 1 blue pre-drilled Midi cable crossover

Please note:

  • The Defender Wheelchair Ramp does not support vehicle traffic.
Configuration - Defender Wheel Chair Ramp [294,1 KB]

 

DEKRA Certificate [3,70 MB]


Users Manual - Defender Series [19,77 MB]

Defender Office GREY
Cable Duct 4-channel grey

 Data Sheet
Dekra Certificate
Technical Drawing
Defender Brochure
User's manual

Office GREY 4 Mini Channels - Indoor & Design Solution Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.

 

  • non-slip, ultra-flat cable protector made of recyclable polyurethane for indoors
  • zigzag connector system, pre-drilled mounting holes, cutting guides for shortening
  • 4 channels: 2 channels each 10 x 10 mm and 12 x 12 mm
  • complies with German workplace accident prevention regulations (§ 3 A1 ArbStättV)
  • fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
  • resistant to oil, acids, solvents, and petrol
  • dimensions 87 x 12 x 2 cm; Weight 1.24 kg
  • reliable protection for cables and personnel
  • available in black (Item No. 85160), grey (Item No. 85160GREY) and yellow (Item No. 85160YEL)
  • curves and end ramps for flexible cable protection are available as accessories

 

Product type Cable Protectors
Type 4 Channels
Length 870 mm
Width 120 mm
Height 21 mm
Channels 4
Width channel 1 10 mm
Height channel 1 10 mm
Width channel 2 12 mm
Height channel 2 12 mm
Width channel 3 12 mm
Height channel 3 12 mm
Width channel 4 10 mm
Height channel 4 10 mm
Material polyurethane
Max. load Office crossover
Fire protection class B2
Weight 1,24 kg
Special feature DEKRA-certified

Defender III cable crossover black joining piece   

 Technical drawing - 85600 [209,5 KB]
  Technical Inspection Agency report [655,3 KB]
 DEFENDER Laser engraving requirements [289,3 KB]
 DEKRA Certificate [3,70 MB]
 Users Manual - Defender Series [19,77 MB] 

The latest development in the Defender cable crossover series. This cable crossover
was developed in collaboration with suppliers for major events. The key feature of this
heavy-duty crossover is the two oversized cable/hose ducts for lines up to 120 mm,
and for fragile connections and connector housings not exceeding 100 mm.
Weight: approx. 25 kg to 27 kg
 


This cable crossover was developed in collaboration with suppliers for major events. The key feature of this heavy-duty crossover is the two oversized cable / hose ducts for lines up to 120 mm, and for fragile connections and connector housings not exceeding 100 mm.

By usage in public traffic, please consider your country-specific road traffic regulations.
  • Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
  • Lenght: 70 cm
  • Width: 78.3 cm
  • Height: 13.9 cm
  • Channels: 2 + 2  
  • Material: PU (Polyurethane)
  • Degree of Hardness: 88 Shore ± 4 A
  • Flame Class: B2 
  • Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm)
  • The Cable-Crossover is oil, acid & petrol resistant
  • Operating Range: -30°C up to +60°C
  • DEKRA certified - Certified product safety

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.

 

 

 Technical drawing - 85002 [356,1 KB]
 Technical Inspection Agency report [655,3 KB]
 DEFENDER Laser engraving requirements [289,3 KB]
 DEKRA Certificate [3,70 MB]
 Users Manual - Defender Series [19,77 MB]

Cable Crossover with lid load bearing capacity per typical tyre imprint (20 x 20 cm): 5 tons. Crossover lengths are joined by individually available connector plugs. Each crossover is supplied with one pair of connector plugs. The lid closes down onto a patented "interlock zipper" (EU Patent No.: EP1366550) which is moulded into the base and lid - no Velcro to tear off or clog with dirt. A complete range of accessories expands the Defender III into a flexible system to protect your cables and multicores.

 

  • Basic module with approved and patented interlocking lid
  • Lenght: 100 cm
  • Width: 60 cm
  • Height: 7.3 cm
  • Channels: 3
  • Width (Channels): 52 mm, 45 mm, 56 mm
  • Height (Channels): 49 mm, 50 mm, 49 mm
  • Flame Class: B2 
  • Load bearing: Approx 5 tons per typical tyre imprint (20 x 20 cm)
  • The Cable-Crossover is oil, acid & petrol resistant
  • Operating Range: -30°C up to +60°C
  • DEKRA certified - Certified product safety
  • 2 connector plugs included

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.

Feel free to contact us for more information.

 

 

 

  • Fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
  • resistant to oil, acids, solvents, and petrol
  • Dimensions 80 x 43 x 4 cm
  • reliable protection for cables and personnel for indoor and outdoor use
  • suitable for higher loads such as forklifts and lifting trucks
  • channels with base: 5 channels 22 x 21 cm
  • weight with base: 7 kg
  • not suitable for vehicular traffic
Defender® Compact with Base

Attached to the optional 5-channel base the Defender® COMPACT drop-over cable protector transforms into a heavy-duty guard with high load capacity to support trucks, forklifts and other vehicles. The ribbed surface provides excellent traction while integrated connectors on the base and drop-over facilitate lining up to form a rigid continuous protection system. The range of applications includes construction sites, carnivals, fairs, trade shows, exhibitions, warehouses, shopping malls and music events.

Product type Cable Protector Accessories
Type 5-channel , Bases
Length 804 mm
Height 37 mm
Width 241 mm
Channels 5
Width channel 1 22 mm
Height channel 1 21 mm
Width channel 2 22 mm
Height channel 2 21 mm
Width channel 3 22 mm
Height channel 3 21 mm
Width channel 4 22 mm
Height channel 4 21 mm
Width channel 5 22 mm
Height channel 5 21 mm
Material polyurethane
Max. load Fork lift, lifting truck
Chemical resistance acid-resistant , oil-resistant , petrol-resistant
Weight 2,031 kg
Special feature DEKRA-certified

 

Weight30.70 kg1.30 kg0.50 kg27.00 kg20.02 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 30.70 kg
Weight 1.30 kg
Weight 0.50 kg
Weight 27.00 kg
Weight 20.02 kg
Weight 2.00 kg