DEFENDER 85305SET Wheelchair Ramp – Ramp Module Set

Professional cable protection combined with a practical solution to make the Defender MIDI cable crossovers suitable for wheelchairs, walking frames and trolleys.

As it is the case with all crossovers of the DEFENDER series, the Defender Wheelchair ramp is oil, acid, and petrol resistant.

We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.

The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.

DEKRA certified - Certified product safety

1 Set is composed of:

• 6 Ramp pieces (3 Lines)
• 4 extremity pieces (2 left extremities / 2 right extremities)
• 1 blue pre-drilled Midi cable crossover

Please note:

• The Defender Wheelchair Ramp does not support vehicle traffic.

DEKRA Certificate [3,70 MB]

Users Manual - Defender Series [19,77 MB]

Defender III cable crossover 45 degree curve

As it is the case with all crossovers of the DEFENDER series, the blue Defender cable crossover is oil, acid, and petrol resistant.

We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.

The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.

DEKRA certified - Certified product safety

1 Set is composed of:

• 6 Ramp pieces (3 Lines)
• 4 extremity pieces (2 left extremities / 2 right extremities)
• 1 blue pre-drilled Midi cable crossover

Please note:

• The Defender Wheelchair Ramp does not support vehicle traffic.

Defender 'Midi' cable crossover 45° curve

 Technical drawing - 85200 [219,8 KB]
 DEFENDER Laser engraving requirements [289,3 KB]
 DEKRA Certificate [3,70 MB]
 Users Manual - Defender Series [19,77 MB]

Small but sturdy. Light, professional and universally applicable, with the familiar black and yellow design. The new Defender Mini meets every expectation for professional cable protection, expanding the Defender series with a very light (only 5 kg!), compact cable crossover, capable of supporting vehicle traffic.

Featuring three cable ducts and a cable cross-section of 35 mm², with an overall height of 48 mm, although used primarily indoors, this crossover can readily support car traffic, due to the load-bearing capacity of more than 2 tons.The bottom of the Defender Mini has a non-slip surface, to ensure an optimal grip on the widest variety of surfaces. Like all of the Defender series crossovers, the Defender Mini is resistant to oils, acids, and petrol, and has a patented self-cleaning hinged closure.

• Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
• Length: 100 cm
• Width: 29 cm
• Height: 4.8 cm
• Channels: 3
• Width Channels: 35 mm
• Height Channels: 30 mm, 35 mm, 30 mm
• Material: PU (polyurethane)
• Shore A hardness: 88 ± 4
• Flammability class: B2 
• Operating temperature: -30°C to +60°C
• Load-bearing capacity: approx. 2 tons, for a surface area of 20 cm x 20 cm
• DEKRA certified - Certified product safety
• Weight 4,65 Kg
  

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.

Feel free to contact us for more information.

 Technical drawing - 85600 [209,5 KB]
  Technical Inspection Agency report [655,3 KB]
 DEFENDER Laser engraving requirements [289,3 KB]
 DEKRA Certificate [3,70 MB]
 Users Manual - Defender Series [19,77 MB] 

The latest development in the Defender cable crossover series. This cable crossover
was developed in collaboration with suppliers for major events. The key feature of this
heavy-duty crossover is the two oversized cable/hose ducts for lines up to 120 mm,
and for fragile connections and connector housings not exceeding 100 mm.
Weight: approx. 25 kg to 27 kg
 

This cable crossover was developed in collaboration with suppliers for major events. The key feature of this heavy-duty crossover is the two oversized cable / hose ducts for lines up to 120 mm, and for fragile connections and connector housings not exceeding 100 mm.

• Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
• Lenght: 70 cm
• Width: 78.3 cm
• Height: 13.9 cm
• Channels: 2 + 2  
• Material: PU (Polyurethane)
• Degree of Hardness: 88 Shore ± 4 A
• Flame Class: B2 
• Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm)
• The Cable-Crossover is oil, acid & petrol resistant
• Operating Range: -30°C up to +60°C
• DEKRA certified - Certified product safety

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.