| Content | - 19" 2U Power Distribution Unit (PDU)
- 16 A / 250 V AC
- On the front, 3 practical outlets with hinged lids
- On the rear, 6 diagonally arranged earthed sockets for easy insertion of power supplies, angle plugs, etc.
- with independent twin-pole power switches for switching the front and rear sides separately
- Robust powder coated steel housing
- Supply: 3 m x 1.5 mm² with safety plug (CEE 7/7)
- Dimensions (WxDxH in mm): 483 x 88 x 90, Installation depth 75mm
|
1 Multiconnector input 8 CEE outputs |
Work ESD 10K Automatic Voltage Regulator
It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.
Technical Specifications:
Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm
| 1 schucko cable input 6 schucko outputs |
Work LS-12 Controller
12 switches panel (0-10 V.) adaptable to model LP-12 S
Dimensions: 483 x 44 x 16 mm. Weight: 1,2 kgs. | Eurolite SB-1100 Practical 32 A distributor in 19" housing
Practical 32 A distributor in 19" housing
Specially designed for larger distribution needs
3 U necessary for installation
32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug
32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker
The entire distributor is secured via 30 mA fault current circuit breaker
2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks
Control lamps indicate each phase
6 safety sockets on the housing back (2 per phase)
Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers
With earthing screw in order to ground a rigg if necessary
Power supply: 380-400 V AC, 50 Hz ~
Max. output/channel (safety socket): 3680 W
Max. current/channel (safety socket): 16 A
Max. output/phase: 7360 W
Max. current/phase: 32 A
Height: 3 U
Dimensions (LxWxH): 482 x 295 x 132 mm
Weight: 6.9 kg |
Reviews
There are no reviews yet.