| Content |
- Silver plated contacts with solder cups
- Heavy-duty D-type metal shell
The 7893 is a D-type 5-pin male XLR chassis connector featuring silver plated solder contacts and a heavy-duty shell of nickel plated zinc alloy.
Product type
Plugs and Connectors
Type
XLR Connectors
Poles
5
Gender
male
Contacts
silver plated
Connection type
Solder / plug-type contact
Housing
nickel plated zinc-alloy
Width
26 mm
Height
31 mm
Depth
34 mm
Weight
0,024 kg
| These compact, low profile, right angle cable connectors are designed to select any
of 7 positions in 45° increments by rotating the assembled insert into various indents
before securing the back cover. Connector type: XLR female.
Shell: Nickel. Contacts: Silver | XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard | NC3FXX-B
3 pole cable connector, female. Black metal housing and gold contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn8
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Latch lock: ZnAl4Cu1
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
NC4FX-HD
Female heavy duty, metal boot with rubber jacket, water protected, IP65.
TECHNICAL DATA
Electrical
Number of contacts: 4
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 10 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Shell (male): stainless steel and zinc diecasting combined.
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Sealing jacket: EPDM
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Protection class: IP 65
Compatibility: IEC 61076-2-103 standard |
The handy dust protection cover can be used, when no cable connector is mated. The cover is
easy to use and does not block the connectors in the panel below when not in use.
Suitable for male chassis connectors. |
Reviews
There are no reviews yet.