| Content |
- Lightweight Aluminium construction
- Foldable in seconds
- Ultra compact
- Adjustable middle tray
- Bag included
The Adam Hall SLT006 laptop stand is lightweight, strong, compact, flexible and last but not least elegant. The stand can be set up and dismantled in a matter of seconds and can even fit in a laptop bag. The lower shelf can be adjusted in four height increments and is ideal for the storage of accessories such as an audio interface.
Product type
Stands and Tripods
Type
Laptop Stand
Material
aluminium
Surface
powder coated
Colour
Silver
Depth
250 mm
Max. width
220 mm
Max. height
300 mm
Height of Lower Shelf
110 mm , 190 mm , 220 mm , 80 mm
Weight
1,85 kg
Additional information
including transport bag |
- Individually adjustable holding pins
- Height: 65-265 mm
- Laptop support: 250 x 303 mm
- Max. load capacity: 8 kg
- Folded size: 303 x 284 x 65 mm
- Weight: 2.9 kg
- Colour: Basalt gray
- Includes device-friendly support pads
- Perfect for the mobile musician and DJ
- Handsome powder coat finish
- Rugged steel base plate
- Lightweight aluminum support plate and extension arm
- Robust hinge joints protect your laptop from slipping
- Adjustable stop pins and rubber caps
- Easy to assemble, disassemble, and break down for transit
- Height range: 2.56 inches to 10.43 inches
| Gravity FDJT 01
DJ Desk with Adjustable Loudspeaker and Laptop Trays
Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.
Your trusty monitors can be placed on the height-adjustable, 360° rotatable and 15° tiltable trays. The precise positioning and inclination of your loudspeakers is made much easier for you by a precise scale on the tubes.
Your laptop is enthroned at the heart of your set-up in the middle of the table, held firmly in place by the integrated pins so that even if tilted extremely, it is always secure. Both loudspeaker and laptop trays can be adjusted precisely along the rear rail of the Gravity® FDJT 01 DJ Desk by shifting them to the left or right.
You will have no trouble adapting the desk to your individual height. It can be set between 680 mm and 1090 mm and offers you plenty of space for your equipment - with a usable depth of 500 mm and a width of 1190 mm.
More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.
| Product type |
Studio & Recording Equipment Tables |
| Type |
DJ table |
| Material |
Steel |
| Surface table |
Powder-coated |
| Surface speaker tray |
EVA padded |
| Surface laptop tray |
Powder-coated |
| Color |
Black |
| Max. support depth table |
500 mm |
| Max. support depth speaker tray |
245 mm |
| Max. support depth laptop tray |
330 mm |
| Min. height table |
680 mm |
| Max. height table |
1090 mm |
| Min. height speaker tray |
263 mm |
| Max. height speaker tray |
358 mm |
| Width table |
1190 mm |
| Width speaker tray |
250 mm |
| Width laptop tray |
480 mm |
| Depth table |
560 mm |
| Depth speaker tray |
250 mm |
| Depth laptop tray |
330 mm |
| Max load table |
50 kg |
| Max. load speaker tray |
15 kg |
| Tilt angle speaker tray |
+/- 15° |
| Rotating range speaker tray |
360° |
| Weight |
25,24 kg |
| Gravity LTS 01 B SET 1 - Adjustable stand for Laptops and Controllers including Neoprene Protection Bag
Featuring a revolutionary patented design, this laptop stand is extremely stable yet lightweight and easily portable. It accomodates all sizes from 12\" to 17\", controllers such as Launchpad, Maschine or Push 2 and folds to compact transport dimensions in seconds. Eccentric locking clamps facilitate quick and secure tilt adjustment of both the non-slip rubberized support and base for optimum ergonomic setup. The set includes a neoprene protection bag to protect the laptop stand from dirt and scratches.
- Folding stand for 12\" to 17\" laptops
- Also accomodates controllers such as Launchpad, Maschine or Push 2
- Extremely sturdy lightweight aluminium construction
- Ultra quick setup and secure tilt adjustment of support and base
- Non-slip rubber pads
- Folds to a compact transport size
- Set includes high-quality neoprene protection bag
Product type
Stands and Tripods
Type
Laptop Stand
Material
Aluminium
Surface
Powder coated
Colour
Black
Depth
280 mm
Support depth
145 mm
Width
260 mm
Support width
200 mm
Height
270 mm
Max. board thickness for table mounting bracket
55 mm with base , 60 mm without base
Maximum load
8 kg
Weight
1,2 kg
Additional information
With high quality protective neoprene carry bag |
The new Traveler Laptop-Stand is a sturdy, extremely lightweight and foldaway DJ-equipment stand to support your laptop (12“-15“), iPad or other compact gear like Machine, APC 20, MPD 18, Launchpad etc. Especially frequently traveling DJs will appreciate its lightweight design which folds flat for space-saving storage in your laptop-bag.
- Sturdy fold-away laptop-stand made of Aluminum Alloy
- Accomodates a 12“-15" Laptop, Maschine, iPad, MPD 18, Launchpad, APC 20 etc.
- Super-lightweight (only 1250 g)
- Folds flat for space-saving storage (only 2 cm thick when folded)
- Assembled and folded in a breeze
- Slip-guard rubber feet and surface to protect your laptop
- Incl. transportation pouch
- Dimensions (H/W/D) : 30 x 22 x 23 (laptop platform) / 30 x 27,5 x 2 cm (folded)
| Features
- Wheeled base for projector, laptop, tablet
- Swivel locking knob: ensures height adjustment without tools
- Raised edge to prevent devices from sliding
- Additional shelf 363 x 300 mm
- Heavy-duty wheels with locking mechanism: can be moved or stopped at will
- Height adjustment: manual
- Table projector material: plastic and steel
- Work surface capacity: 10 kg
- Headlamp base colour: black
Dimensions
- Width: 502 mm
- Depth : 455 mm
- Height: 950-1450 mm
- Surface: 350 x 300 mm
Package contents
- ICA-TB TPM-10 adjustable trolley
- User manual |
Reviews
There are no reviews yet.