| Content | Isolation Pad for Studio Monitors 265 x 330 mm
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
265 mm
Height
40 mm
Depth
330 mm
Weight
0,22 kg |
- Height Adjustable Near-Field Monitor Stand
Speaker plate dimensions: 9” square - 23 cm square
Height Positions (5): 30.7”, 34”, 37.4”, 40.7”, 44” - 78, 86.5, 95, 103.5, 112 cm
Base Size: 14.5” x 16.1” - 37 x 41 cm
Weight capacity: 125 lb - 57 kg
Weight: 11.1 lb - 5 kg
|
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base edge length
100X70 mm
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
| For small speakers and studio monitors
Fine tune your sound the way it’s meant to be heard
The ISO Stands is the latest generation of IsoAcoustics stands designed for studio monitors. The ISO Stands are an updated version of the popular ISO-L8R series and features a lower profile, new frame design and a newer version of isolator for improved performance. The ISO-130 isolation stands are the smallest stands within the ISO Stands family.
Offering 14 variations of height and tilt, the ISO-130 will help you optimize the placement of your monitors and bring your tweeters to ear level. The IsoAcoustics patented isolation system provides superior isolation and decoupling from the supporting surface. The stands are biased to keep all energy in alignment with the listening position, providing greater clarity and focus.
Perfect for optimizing the placement and performance of small studio monitors…
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate soundwave reflections off the supporting surface. In a typical Desktop Audio Workstation (DAW) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands.
Patented IsoAcoustics Isolation
Exciting the supporting surface
The isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms.
Reducing internal reflections
Internal reflections are vibrations reflecting back up the speaker cabinet which causes smear. Smear is a result of artifacts replicated in both channels which are perceived to be in the middle, causing the stereo image to collapse. The IsoAcoustics isolators reduce internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound.
- 2 Units
- Height adjustable: 80-203 mm
- Adjustable inclination
- Allows you to adjust the speakers for an optimal dispersion pattern in the direction of the listener
- Isolates studio monitors from the supporting surface
- Dimensions per piece: 130 x 150 mm (support surface)
- Maximum load capacity: up to 9 kg
- Quantity included: 1 pair
|
- Rubber support surface for a stable stand of the monitors
- Robust construction; Tilt angle ± 10 degrees
- Variable table mounting (max. 55mm)
- Height adjustable in 4 steps from 235mm to 280mm
- Monitor support surface: 220mm x 180mm
- Maximum load: 15kg
- Weight: 1,45kg
| A mix's sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it's not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Interchangeable rings
1 x 20 mm , 1 x 30 mm
Black ring pack included
Yes
|
Reviews
There are no reviews yet.