Content | Our top microphone cable! 100 % shielding, with braided shielding plus AL/PT foil around the conductor pair. Excellent electrical properties and flexible handling speak for themselves. Ideal for applications where electrical interference could affect data transfer.
Product type
Bulk Cable
Type
Microphone cable
Colour
blue
Overall diameter
6.5 mm
Center conductor cross section
0.22 mm²
Center conductor material
copper
Center conductor construction
32 x 0.1 mm
Number of internal conductors
2
Shield material
Copper / aluminium foil
Shield
Braided / wound shielding
Line resistance
Capacitance
60 pF/m
Jacket material
PVC
Weight
0,05 kg
|
- Fine stranded wire for high-quality signal transmission
- Very robust and thick soft PVC jacket
- Good shielding by dense helical copper sprial shielding
- High flexibility makes it easy to reel e.g excelent for cable drums
- extremely good price-performance ratio
The 7116 is a quality microphone cable for balanced, low-impedance applications and clear, quiet signal transfer. It features a twisted pair of finely stranded 0.22 mm² oxygen-free copper conductors and dense spiral wrap shielding for efficient common mode rejection and freedom from interference. The hard wearing PVC jacket provides abrasion resistance and flexibility in live, studio and home recording environments.
Product type
Bulk Cable
Type
Microphone cable
Colour
Black
Overall diameter
6,4 mm + /-0,2 mm mm
Center conductor cross section
0.22 mm²
Center conductor material
Copper bare, OFC
Center conductor construction
28 x 0.1 mm
Number of internal conductors
2
Shield
spiral
Line resistance
87 Ohm(s)
Capacitance
68 pF/m
Jacket material
PVC
Weight
0,048 kg
| PRICE PER METER
A P P L I C A T I O N
Analogue balanced audio links
For fixed and mobile applications
For inside wiring of racks and audio equipment
Studio cabling
P R O D U C T A D V A N T A G E S
100 % shielded
For easy connection
T E C H N I C A L D A T A
NO. OF CONDUCTORS: 1 x 2 x 0,22 mm2 Copper tin plated
CONDUCTOR INSULATION: PE
SHIELDING: Aluminium foil + drain wire
JACKET: Grey PVC
DIAMETER: 2,90 mm
WEIGHT PER 1 KM: 15 Kg / km
PACKAGING: 100, 200, 1000 m roll
SUITABLE PLUG: XLR, jacks, cinchs | The runner marathon doesn't have it easy. He must run and run. In sporting arenas our cables also must put long distances behind themselves. But they neither lie around, nor do they run. The diameter of 2 x 0.50 mm² makes this cable ideal for theatres, public buildings, sporting arenas, etc. Because of the 100 % shielding and a thick outer jacket the SIGMA is also recommended for installation in discos and night clubs. Neither aggressive nicotine nor strong variations in temperature can affect this cable. Stage technicans swear by it and the touring sound agencies prefer the SIGMA because of its endurance and "memory“, making manual winding easy. Halogen-free version available upon request.
Advantages
- Optimum transmission quality even for long lengths due to the large wire diameter of 2 x 0.50 mm²
- 100 % Copper spiral shielding and additional metalic fleece
- Durability due to a thick PVC-jacket with a diameter of 0.264 inch
- Easy to wind and good tensile strength
Application
- Broadcast and transmission vehicle technology, building installation
- Professional studio technology
- Extreme stage application
- Installation in discos, cafés, sporting events
Technical Data
- Construction (2LI2Y0,50mm²)(ST)DY
- Jacket, diameter PVC 6,7 mm
- AWG 21
- ANo. of inner conductors 2 x 0,50 mm²
- Copper strand per conductor 28 x 0,15 mm
- Conductor insulation PE 1,65 mm
- Shielding copper spiral sleeve tin-plated + metalic fleece
- Shielding factor 100 %
- Temperature range min. -30 °C
- Temperature range max. 70 °C
- Fire load per m 0,23 kWh
- Weight per 1 m 53 g
- Packaging 100/500 m roll
Electrical Data
- Capac. cond./cond. per 1 m 80 pF
- Cond. resistance per 1 km 37 Ohm
- Capac. cond./shield. per 1 m 145 pF
- Shield. resistance per 1 km 21 Ohm
- Insulation resist. per 1 km > 1 GOhm
| Conductor drains Ø mm: OFC 28 x 0,10
Conductor insulation: PE red+blue
Conductor insulation Ø in mm: 1,5
Filler material: paper + cotton yarn
1st shield: OFC twisted 83 x 0,12
2nd shield: -
Outer isolation: PVC black, blue, red, yellow, green
Outer isolation Ø in mm: 6
Conductor resistance: 80 Ohm/Km
Shield resistance: 25 Ohm/Km
Capacity Inner conductor: 45 pF/m
Cap. Inner conduct. Shield/Inner conduct.: 112 pF/m
Working temperature: -20~60 °C (min. / max.)
Working Voltage overflash: 30V
Nom Impedance: 110 Ohm | PRICE PER METER
A P P L I C A T I O N
Analogue balanced audio links
For microphone transmissions and audio balanced equipment
For mobile and fixed applications
Analogue balanced audio
P R O D U C T A D V A N T A G E S
Excellent price/quality ratio
Great performance at an excellent price
T E C H N I C A L D A T A
MIC 240
OPERATING TEMPERATURE: -10°C - + 70°C
BEND RADIUS: Fixed station: 30mm
: Mobile station: 60 mm
TEST VOLTAGE (50 Hz / 1 min): 1500V
Max. Operating voltage. : 50/75 v AC / DC
Electrical resistance of the core at 20 ° C: 39 MΩ.km
Insulation resistance at 20 ° C: 100 MΩ / km
NO. OF CONDUCTORS: 2 x 0,50 mm² Bare copper
COMPOSITION OF CORE : 16 x 0,20 mm2 Bare copper
CONDUCTOR INSULATION: PE
COLOR CODING OF CONDUCTORS : Blue, White
ISOLATION PVC: 1.75 mm diameter
SHIELDING: Bare copper braiding
JACKET: Black PVC
DIAMETER : 6,20 mm
WEIGHT PER 1 KM: 55 Kg / km
PACKAGING: 100 and 500 m roll
SUITABLE PLUG: 3pins XLR, jacks, cinch |
Reviews
There are no reviews yet.