User’s manual Adam Hall 19″ Parts PCS 10 Power Conditioner Reliable protection against over-voltage and impulse voltage Effective high frequency filter against interference Central power supply with 8 switchable IEC sockets Unswitched convenience socket on the front Resettable circuit breaker on the front panel In addition to providing a central power supply to racks and […]
Reliable protection against over-voltage and impulse voltage
Effective high frequency filter against interference
Central power supply with 8 switchable IEC sockets
Unswitched convenience socket on the front
Resettable circuit breaker on the front panel
In addition to providing a central power supply to racks and installations, the 19″ AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications.
All AH power conditioners are supplied with four IEC connection cables.
Product type
19 ” Rack power strips
Type
19″ / 1 U
Number of outlets (IEC C14)
9
Input voltage
230 V
Nominal Impedance
max 10 A
Protection Against Impulse Voltage
outer conductor to neutral
Response Time
1 ns
Max. Surge Current
6000A (8×20 µs pulse)
Max. Surge Energy
70 joules per contact
Noise Cancelling
<20 dB, 1.5 MHz-200 MHz
Mains connector
IEC mains cord
Fuse
10 A
Width
482 mm
Height
44.5 mm
Depth
190 mm
Weight
2,27 kg
Features
including 4 power cords
Weight
2.30 kg
Reviews
There are no reviews yet.
Be the first to review “Adam Hall 19″ Parts PCS 10 Power Conditioner” Cancel reply
Reliable protection against over-voltage and impulse voltage
Effective high frequency filter against interference
Central power supply with 8 switchable IEC sockets
Unswitched convenience socket on the front
Resettable circuit breaker on the front panel
In addition to providing a central power supply to racks and installations, the 19" AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications.
All AH power conditioners are supplied with four IEC connection cables.
Product type
19 " Rack power strips
Type
19" / 1 U
Number of outlets (IEC C14)
9
Input voltage
230 V
Nominal Impedance
max 10 A
Protection Against Impulse Voltage
outer conductor to neutral
Response Time
1 ns
Max. Surge Current
6000A (8x20 µs pulse)
Max. Surge Energy
70 joules per contact
Noise Cancelling
<20 dB, 1.5 MHz-200 MHz
Mains connector
IEC mains cord
Fuse
10 A
Width
482 mm
Height
44.5 mm
Depth
190 mm
Weight
2,27 kg
Features
including 4 power cords
Adam Hall Cables 87471
19" Power Strip 1U 8-way with switch
Mains Distribution Unit 19"/1 U
Illuminated 2-pole switch on the front panel
8 mains outlets on the rear panel
Black aluminium housing
54 mm deep
19 "angle can be mounted in four positions
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
8, Rotated 45°
Power input
cables
Cable length
2 m
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
1.5 mm²
Operating voltage
250 V
Max. current
16 A
Cabinet material
Aluminium, Plastic
Color
Black
Width
485 mm
Height
44 mm
Depth
44 mm
Other features
Illuminated on / off switch, Mounting brackets can be used in 4 positions
Weight
0,73 kg
The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-PRO E II power conditioner / sequencer, featuring Furman's revolutionary SMP technology. Furman's Series Multi-Stage Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT) coupled with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOVs. Together, these technologies comprise what is, without question, the world's most advanced and comprehensive transient voltage surge suppressor.
SMP (Series Multi-Stage Protection Plus) Furmanʼs SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furmanʼs SMP, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.
Unique to Furmanʼs SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDAʼs A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furmanʼs SMP clamps at 376VAC peak, 266 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furmanʼs SMP technology.
LiFT (Linear Filtering Technology) Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furmanʼs SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.
E.V.S. (Extreme Voltage Shutdown) Furmanʼs trusted overvoltage circuitry protects against all too frequent accidental connections to high voltages by shutting off the incoming power until the overvoltage condition is corrected.
Rear Panel BNC Connector For rear panel illumination, a BNC connector is provided for connection of any standard gooseneck lamp, such as the Furman GN-LED or GN-I (sold seperately).
Sequencing The PS-PRO E II Power Conditioner/Sequencers is capable of powering up a rack full of equipment in a 3- step delayed sequence. The sequence is reversed for power-down. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step. A front panel screwdriver adjustment sets the delay time for the PS-PRO E II. The PS-PRO E II also features a locking switch with a removable key for maximum security. One or more Furman PS-PRO II's may be installed in remote locations and operated via low-voltage wiring.
Features
SMP provides the highest level of protection available
E.V.S. protects equipment from dangerous overvoltage conditions
Zero ground contamination circuitry assures delivery of pure AC
Six sequenced rear panel outlets (in 3 groups), two switched rear panel outlets, and one front panel switched outlet
Momentary and Maintained sequencing via rear panel terminal block or front panel switch
16 amp rating with circuit breaker
BNC connector on the rear panel allows you to attach any standard 12V gooseneck lamp to illuminate the rear of your rack
Three year limited warranty
SPECIFICATIONS:
Current rating:
16 amps
Operating Voltage:
180 to 280 VAC
Over Voltage Shutdown:
280 VAC typically
Spike Protection Modes:
Line to neutral, zero ground leakage
Spike Clamping Voltage
376 VAC peak @ 3,000 Amps, 266 VAC RMS (tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
Response time:
1 nanosecond
Maximum surge current:
6,500 amps
Noise attenuation:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz Linear attenuation curve from 0.05 - 100 Ohms line impedance
Dimensions:
44.45mm H x 482.6mm W x 266.7mm D.
Weight:
5 kg.
Construction:
Steel chassis, 3.175mm brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
Power consumption:
6 watts
Safety Agency Listings:
CE, NRTL-C
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
SPECIFICATIONS:
Maximum Output Current:
10 amps
Line Cord:
1.5 meter, removable, IEC C-13 female to Schuko male
Operating Voltage:
230VAC 50Hz
Spike Protection Mode:
Line to neutral
Energy Dissipation:
305 joules
Peak Impulse Current:
12,000 amps
Maximum Continuous Opterating Voltage:
650 Volts
Noise Attenuation:
Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
Dimensions:
1.75” H x 19” W x 7.5” D
Weight:
2.3 kg.
Safety Agency Listing:
CE
Warranty:
Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1400 AR E accepts any input voltage from 188V to 270V and transforms it to a constant output of 230V or 240V (switchable), ±10V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.
Additionally, the P-1400 AR E is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furmanʼs Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.
Maximum Current:
6 amps
Line Cord:
Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch:
12VAC 500MA maxx (lamp not included)
Operating Voltage:
170 to 274 VAC
Over-Voltage Shutdown:
275 VAC Nominal
Approximate Input Voltage Capture Range:
174 to 264 VAC
Spike Protection Mode:
Line to neutral, zero ground leakage
Spike Clamping Voltage:
375 VAC peak @ 3,000 Amps
Response Time:
1 nanosecond
Maximum Surge Current:
6,500 Amps
Noise Attenuation:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions:
19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight:
7 kg.
Power Consumption:
5 watts
SPECIFICATIONS:
Maximum Current:
6 amps
Line Cord:
Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch:
12VAC 500MA maxx (lamp not included)
Operating Voltage:
170 to 274 VAC
Over-Voltage Shutdown:
275 VAC Nominal
Approximate Input Voltage Capture Range:
174 to 264 VAC
Spike Protection Mode:
Line to neutral, zero ground leakage
Spike Clamping Voltage:
375 VAC peak @ 3,000 Amps
Response Time:
1 nanosecond
Maximum Surge Current:
6,500 Amps
Noise Attenuation:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions:
19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight:
7 kg.
Power Consumption:
5 watts
Furman M10Lx E Power Conditioner form the Merit Series Power Conditioners is the perfect low cost AC power solution for any rack mount system. Install an Furman M10LxE in to the top slot of your rack, and the 10 switched outlets in the rear panel will power up and protect all your equipment up to a 10 amp load. It not only protects anything plugged into it from spikes and surges, but also has a built in AC noise filter to rid the system of RFI / EMI interference.
TheFurman M-10Lx E also features two slide out, swivelling light fixtures to provide discreet illumination of your equipment. A dimmer knob allows the user to adjust the level of illumination. Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.
Features
AC Noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
Spike & surge protection ensures equipment stays safe and your power stays clean
10 rear panel outlets, with front panel convenience outlet
10 amp rating, with circuit breaker
Two retractable LED light fixtures with dimmer control for convenient rack illumination
Three year warranty
Specification
Maximum Output Current: 10 amps
Lamps: LED
Operating Voltage: 230VAC 50Hz
Spike Protection Mode: Line to neutral
Peak Impulse Current: 12,000 amps
Maximum Continuous Operating Voltage: 650 Volts
Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.