Adam Hall 19″ Parts PCS 10 Power Conditioner

No longer available!

175.88 incl. GR VAT

Only 1 left in stock

EAN: 4049521173905
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: AHPCS10 Category:
User’s manual Adam Hall 19″ Parts PCS 10 Power Conditioner Reliable protection against over-voltage and impulse voltage Effective high frequency filter against interference Central power supply with 8 switchable IEC sockets Unswitched convenience socket on the front Resettable circuit breaker on the front panel In addition to providing a central power supply to racks and […]

 

Read more

User’s manual

Adam Hall 19″ Parts PCS 10
Power Conditioner

  • Reliable protection against over-voltage and impulse voltage
  • Effective high frequency filter against interference
  • Central power supply with 8 switchable IEC sockets
  • Unswitched convenience socket on the front
  • Resettable circuit breaker on the front panel

In addition to providing a central power supply to racks and installations, the 19″ AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications.

All AH power conditioners are supplied with four IEC connection cables.

Product type
19 ” Rack power strips

Type
19″ / 1 U

Number of outlets (IEC C14)
9

Input voltage
230 V

Nominal Impedance
max 10 A

Protection Against Impulse Voltage
outer conductor to neutral

Response Time
1 ns

Max. Surge Current
6000A (8×20 µs pulse)

Max. Surge Energy
70 joules per contact

Noise Cancelling
<20 dB, 1.5 MHz-200 MHz

Mains connector
IEC mains cord

Fuse
10 A

Width
482 mm

Height
44.5 mm

Depth
190 mm

Weight
2,27 kg

Features
including 4 power cords
Weight 2.30 kg

Reviews

There are no reviews yet.

Be the first to review “Adam Hall 19″ Parts PCS 10 Power Conditioner”

Your email address will not be published. Required fields are marked *

Quick Comparison

Adam Hall 19" Parts PCS 10 Power Conditioner removeFURMAN PS-PRO E II POWER CONDITIONER/SEQUENCER removeWORK D-2 RACK LIGHTING PANEL w-DIMMER removeFURMAN P1400AR-E VOLTAGE REGULATOR / POWER CONDITIONER removeFURMAN CLASSIC SERIES PL-PRO DMC 16 AMP POWER CONDITIONER removeAdam Hall 87471 C20 19" Power Strip 8-way With Cold Device Socket 1U remove
NameAdam Hall 19" Parts PCS 10 Power Conditioner removeFURMAN PS-PRO E II POWER CONDITIONER/SEQUENCER removeWORK D-2 RACK LIGHTING PANEL w-DIMMER removeFURMAN P1400AR-E VOLTAGE REGULATOR / POWER CONDITIONER removeFURMAN CLASSIC SERIES PL-PRO DMC 16 AMP POWER CONDITIONER removeAdam Hall 87471 C20 19" Power Strip 8-way With Cold Device Socket 1U remove
Image87471C20_power distributor c20 cold socket 8way out
SKUAHPCS10PSPROEIID-2P1400AREPLPRODMCE87471C20
Rating
Price 175.88 incl. GR VAT564.20 incl. GR VAT 81.93 incl. GR VAT1,331.50 incl. GR VAT639.98 incl. GR VAT 59.52 incl. GR VAT
Stock

Only 1 left in stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentUser's manual

Adam Hall 19" Parts PCS 10 Power Conditioner

  • Reliable protection against over-voltage and impulse voltage
  • Effective high frequency filter against interference
  • Central power supply with 8 switchable IEC sockets
  • Unswitched convenience socket on the front
  • Resettable circuit breaker on the front panel
In addition to providing a central power supply to racks and installations, the 19" AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications. All AH power conditioners are supplied with four IEC connection cables.
Product type
19 " Rack power strips

Type
19" / 1 U

Number of outlets (IEC C14)
9

Input voltage
230 V

Nominal Impedance
max 10 A

Protection Against Impulse Voltage
outer conductor to neutral

Response Time
1 ns

Max. Surge Current
6000A (8x20 µs pulse)

Max. Surge Energy
70 joules per contact

Noise Cancelling
<20 dB, 1.5 MHz-200 MHz

Mains connector
IEC mains cord

Fuse
10 A

Width
482 mm

Height
44.5 mm

Depth
190 mm

Weight
2,27 kg

Features
including 4 power cords

The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-PRO E II power conditioner / sequencer, featuring Furman's revolutionary SMP technology. Furman's Series Multi-Stage Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT) coupled with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOVs. Together, these technologies comprise what is, without question, the world's most advanced and comprehensive transient voltage surge suppressor.

SMP (Series Multi-Stage Protection Plus)
Furmanʼs SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furmanʼs SMP, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.

Unique to Furmanʼs SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDAʼs A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furmanʼs SMP clamps at 376VAC peak, 266 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furmanʼs SMP technology.

LiFT (Linear Filtering Technology)
Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furmanʼs SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.

E.V.S. (Extreme Voltage Shutdown)
Furmanʼs trusted overvoltage circuitry protects against all too frequent accidental connections to high voltages by shutting off the incoming power until the overvoltage condition is corrected.

Rear Panel BNC Connector
For rear panel illumination, a BNC connector is provided for connection of any standard gooseneck lamp, such as the Furman GN-LED or GN-I (sold seperately).

Sequencing
The PS-PRO E II Power Conditioner/Sequencers is capable of powering up a rack full of equipment in a 3- step delayed sequence. The sequence is reversed for power-down. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step. A front panel screwdriver adjustment sets the delay time for the PS-PRO E II. The PS-PRO E II also features a locking switch with a removable key for maximum security. One or more Furman PS-PRO II's may be installed in remote locations and operated via low-voltage wiring.

Features
  • SMP provides the highest level of protection available
  • LiFT significantly reduces AC line noise
  • E.V.S. protects equipment from dangerous overvoltage conditions
  • Zero ground contamination circuitry assures delivery of pure AC
  • Six sequenced rear panel outlets (in 3 groups), two switched rear panel outlets, and one front panel switched outlet
  • Momentary and Maintained sequencing via rear panel terminal block or front panel switch
  • 16 amp rating with circuit breaker
  • BNC connector on the rear panel allows you to attach any standard 12V gooseneck lamp to illuminate the rear of your rack
  • Three year limited warranty

SPECIFICATIONS:

Current rating:16 amps
Operating Voltage:180 to 280 VAC
Over Voltage Shutdown:280 VAC typically
Spike Protection Modes:Line to neutral, zero ground leakage
Spike Clamping Voltage376 VAC peak @ 3,000 Amps, 266 VAC RMS
(tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
Response time:1 nanosecond
Maximum surge current:6,500 amps
Noise attenuation:10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
Linear attenuation curve from 0.05 - 100 Ohms line impedance
Dimensions:44.45mm H x 482.6mm W x 266.7mm D.
Weight:5 kg.
Construction:Steel chassis, 3.175mm brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
Power consumption:6 watts
Safety Agency Listings:CE, NRTL-C

Rack lighting panel with two gooseneck. Dimmer. 12 V. lamps. I
ncludes power supply.
Dimensions: (W x H x D) 482 x 43 x 43 mm.
Weight: 2,5 kgs.

The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1400 AR E accepts any input voltage from 188V to 270V and transforms it to a constant output of 230V or 240V (switchable), ±10V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.

Additionally, the P-1400 AR E is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furmanʼs Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.

Maximum Current: 6 amps
Line Cord: Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
Operating Voltage: 170 to 274 VAC
Over-Voltage Shutdown: 275 VAC Nominal
Approximate Input Voltage Capture Range: 174 to 264 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight: 7 kg.
Power Consumption: 5 watts

SPECIFICATIONS:

Maximum Current: 6 amps
Line Cord: Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
Operating Voltage: 170 to 274 VAC
Over-Voltage Shutdown: 275 VAC Nominal
Approximate Input Voltage Capture Range: 174 to 264 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight: 7 kg.
Power Consumption: 5 watts

The Furman PL-PRO DMC is the latest generation of Furman's 16 amp power conditioners, featuring 8 rear-panel mains outlets and one front-panel mains outlet, Furman's exclusive Series Multi-Stage Protection Plus SMP+ with Linear Filtering Technology LiFT and Extreme Voltage Shutdown EVS for ultra-reliable protection of your gear. The PL-PRO DMC also incorporates a USB port on the front panel to allow for the charging of MP3 players and other such devices that can be recharged via USB.

The Furman PL-Pro DMC power conditioner features dimmable LED rack lights that produce virtually no heat and provide an extremely long lifespan. A rear-mounted BNC jack accepts any standard 12VAC, 0.5A gooseneck lamp for rear rack illumination, as well as a front-panel switch which controls the gooseneck's operation. A front-panel mounted master power switch is protected by a hinged cover, preventing accidental disconnection of AC power to the unit's outlets.

The Furman PL-Pro DMC power conditioner has a front-panel digital voltmeter, and the circuit breaker power switch can be easily reset should the unit be overloaded. Portable music players are becoming a staple on live sound gigs and the PL-PRO DMC includes a front-panel USB port for charging and powering of these devices.

Traditional surge suppression circuits "sacrifice" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP+. With the Furman PL-PRO DMC's SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no service calls, no down time.

FURMAN PL-PRO DMC E CLASSIC SERIES POWER CONDITIONER FEATURES

Retractable LED rack lights with on/off/dimmer control.
Isolated outlet banks to minimize inter-component interference and noise contamination.
BNC back panel connector for gooseneck lamp with front-panel switch.
Maintenance-free surge suppression thanks to Series Multi-Stage Protection Plus (SMP+) circuit with extreme voltage shutdown.
8 rear-panel outlets and one front-panel outlet.
LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
Front panel USB charger for small USB devices.
Three widely spaced outlets accommodate bulky AC power transformers.
LiFT Linear Filtering Technology with zero ground contamination.
Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
Segmented LED Voltmeter monitors and displays incoming line voltage.
16 amp rating, with high-inrush thermal circuit breaker for added protection.
Two, pull out multi-LED, dimmable lamps.
One rack unit space.

FURMAN PL-PRO DMC E CLASSIC SERIES POWER CONDITIONER SPECIFICATIONS
Maximum Output Current: 16 amps.
Pull-out Lights: Two multi-LED, dimmable lamps.
BNC Socket w/Switch: Rear rack lamp, 12VAC 500mA maxx. Lamp not included.
Operating Voltage: 180 to 274 VAC.
Spike Protection Mode: Line to neutral, zero ground leakage.
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps.
Maximum Surge Current: 6,500 Amps.
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz.
Dimensions (mm, WxHxD): 482.6 x 266.7 x 4.45.
Weight: 6 kg.
Power Consumption: 12 watts.

Adam Hall Cables 87471 C20

19" Power Strip 1U 8-way with C20 cold device socket

  • Power distributor with IEC C20 socket and detachable supply cable included
  • Max. current 16 A
  • 8 45° rotated Schuko sockets
  • Illuminated mains switch
  • 250 V operating voltage

Description

Professional and stable 8-way socket strip in 19" format with 1 U. Perfectly suited for installation in racks and the associated power distribution of devices. For a maximum current of 16 A in connection with an IEC cable, there is the IEC C20 connection, which is installed here. The mains cable with IEC C19 on angled Schuko connection and 2 m length is included. The power distributor has an on/off switch at the front and the sockets at the rear are rotated by 45°.

Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
8
Power input
cables
Cable length
2 m
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
3 x 1.5 mm² mm²
cable type
H05VV-F
Operating voltage
250 V
Max. current
16 A A
Cabinet material
Aluminium
Color
Black
Width
485 mm
Height
44 mm
Depth
44 mm
Other features
19" rack mains socket strips, Illuminated on / off switch
Weight
0,73 kg
Weight2.30 kg5.00 kg2.50 kg7.00 kg6.00 kg1 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.30 kg
Weight 5.00 kg
Weight 2.50 kg
Weight 7.00 kg
Weight 6.00 kg
Weight 1 kg