| Content | Universal speaker stand for loudspeakers till 35 kg, black powder coated.
Triangular foot, 35 mm square section tube, utility space 450 x 390 mmTube Ø 40 / 35 mm, adjustable 91,5 cm - 150 cm, T-screw for locking.
Πλευρά τριγώνου 43cm, ύψος τριγώνου 39cm
For heavy speakers you can lock the height on 102 - 114 - 126 - 138 - 150 with the safety pin (included in delivery). Utility space for speakers: 230 x 230 mm, steel material thickness 2 mm, slip resistant surface. Plastic cable clip on upper tube for adequate and discreet cable guiding.
The foot can be equipped with 3 adjustable plastic feet or steel-spikes. Without the plate you can use the speaker stand with a standard speaker stand receptable (Ø35mm).
The product is delivered dismantled, with screws and hexagon socket screw key, 3 plastic feet and 3 steel spikes with lock nut.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height:
915 mm
Max height
1500 mm
Joint material
plastic
Tubing diameter
35 / 40 mm
Max. load
35 kg
Weight
4,4 kg
Additional information
Footprint 230 x 230 mm |
- Steel tray with isolating foam rests
- Black powder coating
- 40 kg max. load capacity
- Includes spikes and cable clips
This 86 cm high loudspeaker stand is ideal for studio monitors and home speakers and is fitted with a triangular foot with an edge length of 44.5 cm. The foam-padded steel tray provides 28 x 28 cm standing space, which is sufficient for all standard monitor speakers.
The exceptionally sturdy design made with black powder-coated steel carries a maximum weight of 40 kg. Delivery also includes 4 cable clips for tidy cable organisation, as well as a set of steel spikes.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
860 mm
Max height
860 mm
Height adjustment
no
Base type
triangle
Base edge length
445 mm
Max. load
40 kg
Weight
4,87 kg
Additional information
Cable routing (4 Pcs.) and spikes (3 Pcs.) included |
Universal Horn Clamp for SM98 Microphone |
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base edge length
100X70 mm
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
|
These Monitor stands feature cabinet quality top plates, cable management, Metal base spikes,
and the ability to add shot or sand internally. They are also great for living rooms to get those
expensive speakers up to ear level and produce the sharpest and clearest sound possible.
Cable management runs from top to bottom. A plastic strip snaps in to back to retain and hide
cables. This unique feature has two channels to prevent interference when using non-balanced cables.
It also keeps the cables out the center channel when you weight the stand with shot or sand. | Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: M
- Dimensions: 250 x 320 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
|
Reviews
There are no reviews yet.