Content | Universal speaker stand for loudspeakers till 35 kg, black powder coated.
Triangular foot, 35 mm square section tube, utility space 450 x 390 mmTube Ø 40 / 35 mm, adjustable 91,5 cm - 150 cm, T-screw for locking.
Πλευρά τριγώνου 43cm, ύψος τριγώνου 39cm
For heavy speakers you can lock the height on 102 - 114 - 126 - 138 - 150 with the safety pin (included in delivery). Utility space for speakers: 230 x 230 mm, steel material thickness 2 mm, slip resistant surface. Plastic cable clip on upper tube for adequate and discreet cable guiding.
The foot can be equipped with 3 adjustable plastic feet or steel-spikes. Without the plate you can use the speaker stand with a standard speaker stand receptable (Ø35mm).
The product is delivered dismantled, with screws and hexagon socket screw key, 3 plastic feet and 3 steel spikes with lock nut.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height:
915 mm
Max height
1500 mm
Joint material
plastic
Tubing diameter
35 / 40 mm
Max. load
35 kg
Weight
4,4 kg
Additional information
Footprint 230 x 230 mm |
- Height: 30 - 40 - 50 cm (11.8 - 15.5 - 19.7“), 3 steps, with safety pin
- Maximum load: 25 kg (55.1 lb)
- Material: Steel (pole and plate) and nylon (joint)
- Top plate: Square, sturdy
- Top plate dimensions: 23 x 23 cm (9 x 9“)
- Bottom plate dimensions: 24 x 24 cm (9.4 x 9.4“)
- Quantity: 2 stands
- Weight: 2.75 kg (6 lb) per stand
| Adjustable heavy-duty studio monitor stand set suitable for studio monitor speakers up to 8 inch. The stands are adjustable between 34cm and 49cm in height. Comes supplied including 8 anti-vibrating caps and a foam anti-slip topping to stick on the top if required.
- Universal fit for all Studio monitors up to 8“
- Quick and easy to setup and adjust
- Metal upright sections with black finish
- Adjustable height: 340 - 495mm
- Supplied with allen key, anti-slip topping and feet
- Maximum load 20kg per stand
Height |
340mm |
Max. load |
20kg |
Max. height |
495mm |
Tube |
Top 35mm / Bottom 40mm |
Dimensions: Folded |
220 x 230mm (Topplate) |
Dimensions |
240 x 240mm (Bottomplate) |
Weight |
5kg |
| The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
900 mm
Max height
1500 mm
Height adjustment
Clamp with safety pin
Base type
3-point
Base material
Cast iron
Base edge length
292.5 mm
Lower connector
M20
Tubing diameter
42 mm / 35 mm
Max. load
50 kg
Interchangeable rings
1 x 25 mm , 1 x 30 mm
Weight
6,5 kg
Additional information
Including acoustic isolation spikes | The Fluid Audio DS5 desktop monitor stands are designed for use with all 4” and 5” 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 2.5” and 5”. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt.
Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or "beamy”), getting them up and closer to ear level means you hear a more full-frequency response. Made from MDF wood (the same material as your monitor enclosures) they are rugged and acoustically well damped. The stand "posts” are made with polypropylene, minimizing the "ringing” sound of ABS plastic. Both top and bottom of the stands are capped off with extremely absorbent, 40 durometer rubber feet. The result of the stand construction allows your monitors to "breathe” and to produce much purer tones and a less distorted midrange.
Package Contents
- 4 x 2.5” stand "posts”
- 4 x 5” stand "posts”
- 4 x middle stabilizers
- 10 rubber feet (10mm)
- 5 rubber feet (18mm)
- 10 screws (for mounting posts)
Features
- Fits all 4” and 5” studio monitors
- Allows for 2 height adjustments: 2.5” and 5”
- Allows for 3 angle adjustments: Flat, 3 deg and 6 deg
Specifications/Material
- Middle stabilizers: Vinyl-laminated MDF
- Stands: Polypropylene plastic
- Rubber: Highly absorbent, 40 Durometer
- Size (packed): 5.94 x 7.44 x 4.5”
- Max load 10kg per unit
- Weight: 0.9kgs/giftbox
Measures
- Total depth: 185mm
- Distance between front and rear rubber support: 127mm
- Total width: 142mm
- Distance between left and right rubber support: 117mm
| The Gravity studio monitor stand GSP 3202 VARI-TILT® features a heavy, triangular base made of cast iron and a 25x25 cm steel tray with isolating foam rests. It is tilt-adjustable by 10° and height-adjustable from 90 to 150 cm for optimum speaker positioning. The stand is supplied with a set of spikes. Mounted on the large, integrated rubber feet, these ensure effective coupling to the floor.
Product type
Stands and Tripods
Tubing surface
Powder coated
Height adjustment
Clamp with safety pin
Base edge length
292.5 mm
Tubing diameter
42 mm / 35 mm
Centic load capacity (without spikes)
30 kg
Centic load capacity (with spikes)
10 kg
Interchangeable rings
1 x 15 mm, 1 x 20 mm, 1 x 30 mm
Black ring pack included
Yes
Additional information
Including acoustic isolation spikes
|
Reviews
There are no reviews yet.