Content | Get the most out of your speakers and shine your lights from above - put them up on a stand. Providing firm support, the SLS 315 B has a braced tripod base and twin extensions for a maximum height of 3.1 m. This dual purpose speaker and lighting stand features a rugged all-steel construction with unbreakable plastic parts and 30 kg load capacity.
Adam Hall Stands SLS315B
Professional Speaker and Lighting Stand
- Rugged all-steel construction and unbreakable plastic parts
- Braced legs for high stability
- Twin extensions
- Set screw and safety pin height adjustment
- 30 kg load capacity
Product type
Stands and Tripods
Stand surface
Powder coated
Height adjustment
Clamp with safety pin
Material of height adjustment
Steel
|
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don\'t need a clavilux, just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes. As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Product type Type Material Surface Color Fitting Length Stud spacing Max. load capacity Weight | - Adjustable height: 1450-3500mm
- Load capacity: 50kg |
Item Weight | 10 Kg | Product Dimensions | 18.5 x 15.5 x 158 cm | Item model number | STV-40S Steel Lighting Stand |
|
Product type
Stands and Tripods Multimedia Equipment
Tubing surface
Powder-coated
Width adjusting jaws
40 mm
Width spacing between adjusting pins min.
120 mm
Width spacing between adjusting pins max.
425 mm
Height spacing between adjusting pins to adjusting jaws min.
117 mm
Height spacing between adjusting pins to adjusting jaws max
250 mm
Width spacing between adjusting jaws min.
130 mm
Width spacing between adjusting jaws max.
360 mm
Height adjustment
Set screw with safety split pin
Dimensions Base (W x H x D)
565 x 20 x 330 mm
Interchangeable rings
1 x 25 mm, 2 x 30 mm, 4 x 15 mm
Black ring pack included
Yes
| Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) |
Reviews
There are no reviews yet.