Stock | Only 1 left in stock (can be backordered)
| Only 3 left in stock (can be backordered)
| Available on backorder
| Only 1 left in stock (can be backordered)
| Only 1 left in stock (can be backordered)
| Only 2 left in stock (can be backordered)
|
Content | Adam Hall Stands SLS 6
Lighting Stand
- Lightweight lighting stand with crossbeam and 2-stage boom arm
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
steel
Truss material
steel
Stand surface
powder coated
Crossbar surface
powder coated
Stand colour
Black
Number of extensions
2
Min. height
1240 mm
Max height
2730 mm
Transport length
1080 mm
Max. load
25 kg
Holding fixture for TV Spigot
yes
TV spigot
17 mm
Crossbar length
920 mm
Tiltable crossbar
no
Weight
3,95 kg | The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.
Product type
Stands and Tripods
Type
Lighting Stands
Tube material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
1420 mm
Max height
2420 mm
Transport length
1420 mm
Height adjustment
set screw and safety pin
Number of extensions
1
Base material
Steel
Material of height adjustment
Steel
Tube diameter
35 mm
Dimensions Base (W x H x D)
563 x 563 x 15 mm
Base weight
14 kg
Interchangeable rings
1 x 30 mm
Black ring pack included
Yes
Max. load capacity
20 kg
Weight
17,8 kg |
Well equipped to handle the daily grind and time constraints of touring: That\'s the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary. Product type Type Tubing material Tubing colour Tubing surface Min height Max height Transport length Height adjustment Base material Material of height adjustment Dimensions Base (W x H x D) Base weight Max. load capacity Weight |
- Light aluminium crossbeam
- Highly robust flange
- Quick-release clamp for safe installation in no time at all
This universal crossbeam quickly converts stands with a 35 mm tube diameter into a light stand. It is made with light but robust aluminium and is quickly and securely mounted thanks to its robust flange with fast-closing
Product type
Stands and Tripod Accessories
Type
Lighting Stands
Fitting
36 mm clamp
Material
die-cast aluminium
Surface
Powder coated
Colour
Black
Length
1235 mm
Max. load capacity
50 kg
Weight
1,673 kg
|
- Durable, water repellent 600D nylon shell
- 10 mm foam padding
- Padded dividers
- Heavy gauge zipper
- 2 carry straps and shoulder strap
This heavy duty carry bag with 10 mm padding holds and protects four Gravity Vari-Poles® from bumps and dents. It is made of tough 600D nylon that is water repellent and easy to clean, padded dividers keep the clamping poles separate to prevent scratches. Two carry straps, a shoulder strap and the heavy gauge zipper closure provide handling convenience.
Product type
Stands and Tripod Accessories
Type
Transport bag
For number of stands
4
For type of stand
Clamping rod
Colour
Black
Material
Nylon 600D
Thickness of the padding
10 mm
Latch
zip
Width
2150 mm
Height
430 mm
Depth
120 mm
Weight
3,5 kg
| Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) |
Reviews
There are no reviews yet.