Content | Speaker Stand Set 2 Speaker Stands with Bag
Speaker Stand Set with Transportbag - Set composed of 2 x black aluminium speaker stands (SPS023) and one transport bag.
Product type
Stands and Tripods
Weight
4,5 kg
SPS023BAG - Adam Hall Stands SPS 023 BAG Transporttasche für 2 Boxenständer
Product type
Stands and Tripod Accessories
Weight
0,35 kg
Colour
Black
Material
nylon
Width
1140 mm
Height
220 mm
Depth
150 mm
SPS023 - Adam Hall Stands SPS 023 Boxenständer schwarz
Type
Speaker Stands
Weight
1,925 kg
Tubing material
Aluminium
Tubing colour
Black
Tubing surface
Powder coated
Min height
1250 mm
Max height
1950 mm
Transport length
1040 mm
Joint material
plastic
Tubing diameter
41/35 mm
Max. load
25 kg | JBL MTC-128RIF Metall128W/WT Framework mounting plates made of metal for the easy and simple installation of the wall loudspeakers 128W |
The Original Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to its over-sized heavy wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand - they're strong, sturdy, lightweight, and 100% field serviceable. You can choose between a black or silver finish with the TS-80B and TS-80S or the TS-88B, which has a black finish and is about two and a half feet taller than the TS-80B and TS-80S. The Original Series tripod speaker stands from Ultimate Support are the industry standards that you've seen on stages for decades.
TS-80B Product Breakdown:
Patented Tripod Design
Over-sized Heavy Wall Aluminum Tubing
100% Field Serviceable Parts
Patented Die-cast Metal Collar on TLF
Patented Tripod Design
The TS-80's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.
Over-sized Heavy Wall Aluminum Tubing
The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-80 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.
100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-80 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-90, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!
Patented Die-cast Metal Collar on TLF
The strongest leg fitting made, the collar on the TS-80's tripod leg fitting (TLF) prevents over-tightening and breakage issues associated with all plastic designs. It also features a Quick Release design allows faster setup, and the same force to be applied every time (similar to the same type of design used n most high-end bicycle seat posts). Plus, our die-cast fitting is 30x stronger than ABS or Nylon plastic used by the competition.
Part Name: TS-80B
Part Number: 13904
Color: Black
Height: 3'8" - 6'7" (1118 mm - 2007 mm)
Weight: 7.3 lbs. (3.3 kg)
Base Diameter: 47" (1194 mm)
Telescoping Tube Diameter: 1.5" (38 mm)
Adapter Diameter: 1.375" (35 mm)
Load Capacity: 150 lbs. (68.2 kg)
Folded: 43.5" x 5.5" (1105 mm x 140 mm) |
The GSP 5211 ACB is a classic tripod speaker stand made from thick walled, yet lightweight powder coated aluminium tubing with a maximum height of 192 cm. Featuring a built-in air brake it allows you to lower loads up to 50 kg with minimum effort.
The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. To provide superior strength the height adjustment collar is made of steel and is virtually indestructable. A safety pin securely locks the 35 mm diameter extension pole in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.
A set of black coding rings is included with the SP 5211 ACB, additional ring packs are available in a wide array of colors for instant personalization.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
aluminium
Tubing colour
Black
Tubing surface
Powder coated
Min height
1060 mm
Max height
1920 mm
Transport length
1050 mm
Height adjustment
Yes
Material of height adjustment
Steel
Base type
Tripod
Base material
die-cast aluminium
Tubing diameter
35 mm
Max. load
50 kg
Black ring pack included
Yes
Weight
2,8 kg
|
Adam Hall Stands SPS 56 B Speaker stand
Black aluminium speaker stand with pneumatic suspension
Pneumatic suspension at no extra charge! The air cushioning guarantees a secure descent and easier handling of the speaker.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Aluminium
Tubing colour
Black
Tubing surface
Powder coated
Min height
1200 mm
Max height
2000 mm
Joint material
metal
Tubing diameter
40/35 mm
Max. load
30 kg
Weight
2,548 kg
Additional information
with pneumatic shock absorber
| • Professional air cushioned speaker stand with Ø35mm pole. Made of steel and aluminium to grant the necessary weight, the maximum robustness and stability
• Height adjustment by automatic pushbutton and safety knob
• Central joint, legs link base and pneumatic valve made of loaded nylon
• Non-slip rubber feet with a special design specifically studied to reduce the vibrations transmission
• Aluminium telescopic tube with anti-rotation groove and equidistant holes
• Sturdy steel legs with a special slot that allows a total closure of link bars to grant safety and space saving
Height |
min 133,5 - max 210 cm |
Spread |
max 120 cm |
Weight |
4 Kg |
Carriage capacity |
90 Kg |
Master carton (pcs) |
6 |
Volume (cbm) |
0,196 |
Color |
black - orange |
|
Reviews
There are no reviews yet.