Content |
- For 35mm stands
- Variable from 20cm to 40cm
- Punched markings for easy and centered positioning
- Safety pins included
Truss adapter for 35 mm tripod mounts (e.g. for speaker stands) with variable width (20-40 cm). Indentations for common truss systems facilitate set-up and ensure a central position. Locking pins and cotter pins are included.
Product type
Truss Accessories
Type
Truss adapter
Colour
silver
Material
Steel
Surface
galvanized
Suitable for tube diameter
35 mm
Adjustable Range
200 - 400 mm
Length
510 mm
Max. load capacity
50 kg
Weight
2,2869 kg |
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don\'t need a clavilux, just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes. As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Product type Type Material Surface Color Fitting Length Stud spacing Max. load capacity Weight | Adam Hall Stands SLS 6
Lighting Stand
- Lightweight lighting stand with crossbeam and 2-stage boom arm
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
steel
Truss material
steel
Stand surface
powder coated
Crossbar surface
powder coated
Stand colour
Black
Number of extensions
2
Min. height
1240 mm
Max height
2730 mm
Transport length
1080 mm
Max. load
25 kg
Holding fixture for TV Spigot
yes
TV spigot
17 mm
Crossbar length
920 mm
Tiltable crossbar
no
Weight
3,95 kg |
- Large lighting stand with crossbar and TV spigot adaptors (length 123 cm).
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
Steel
Truss material
Steel
Stand surface
Powder coated
Crossbar surface
Powder coated
Stand colour
Black
Crossbar colour
Black
Number of extensions
2
Min. height
1700 mm
Max height
3500 mm
Tube diameter
35 mm
Transport length
1410 mm
Max. load
45 kg
Holding fixture for TV Spigot
Yes
TV spigot
28 mm
Crossbar length
1230 mm
Tiltable crossbar
no
Weight
8,56 kg |
- Durable, water repellent 600D nylon shell
- 10 mm foam padding
- Padded dividers
- Heavy gauge zipper
- 2 carry straps and shoulder strap
This heavy duty carry bag with 10 mm padding holds and protects four Gravity Vari-Poles® from bumps and dents. It is made of tough 600D nylon that is water repellent and easy to clean, padded dividers keep the clamping poles separate to prevent scratches. Two carry straps, a shoulder strap and the heavy gauge zipper closure provide handling convenience.
Product type
Stands and Tripod Accessories
Type
Transport bag
For number of stands
4
For type of stand
Clamping rod
Colour
Black
Material
Nylon 600D
Thickness of the padding
10 mm
Latch
zip
Width
2150 mm
Height
430 mm
Depth
120 mm
Weight
3,5 kg
| Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) |
Reviews
There are no reviews yet.