Content |
- For 35mm stands
- Variable from 20cm to 40cm
- Punched markings for easy and centered positioning
- Safety pins included
Truss adapter for 35 mm tripod mounts (e.g. for speaker stands) with variable width (20-40 cm). Indentations for common truss systems facilitate set-up and ensure a central position. Locking pins and cotter pins are included.
Product type
Truss Accessories
Type
Truss adapter
Colour
silver
Material
Steel
Surface
galvanized
Suitable for tube diameter
35 mm
Adjustable Range
200 - 400 mm
Length
510 mm
Max. load capacity
50 kg
Weight
2,2869 kg | If you have to mount headlights or speakers under time pressure in the hard day-to-day touring routine, you are perfectly equipped with the stable distance pole TLS P 431. It is part of the Gravity Touring series, which was especially designed for the high demands on stage.
The big advantage: Thanks to the automatic LockPin technology, set-up is done faster, because the height adjustment lock snaps into place automatically and no additional pin is required.
The connection between base and pole has been additionally reinforced with a stabilizing sleeve to prevent any wobbling. With the 35 mm extension tube that has an M10 female thread on top, you can extend the stand up to 2.40 meters and it will remain stable.
- Ideal for rental and event organizer
- Stabilizer sleeve for a better connection between base and pole
- 35 mm-extension tube with M10 inner thread
- Automatic LockPin locking system
- Maximum height: 2.40 m
Product type
Stands and Tripods
Tubing surface
Powder-coated
Height adjustment
Automatic LockPin®
Material of height adjustment
Steel
| Proffesional wind up stand made of strenghtened steel loads up to 60kg. Installed ratchet lock protects fixed equipment against uncontrolled falling down and damage. Itʼs an ideal solution for mobile DJ and musicians.
Material: steel
Load capacity: 60 kg
Maximum height: 2,70 m
Base spread diameter: 1,54 m
Height: 1,60 m
Pipe diameter: 35 mm
Weight: 12 kg |
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don\'t need a clavilux, just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes. As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Product type Type Material Surface Color Fitting Length Stud spacing Max. load capacity Weight |
Well equipped to handle the daily grind and time constraints of touring: That\'s the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary. Product type Type Tubing material Tubing colour Tubing surface Min height Max height Transport length Height adjustment Base material Material of height adjustment Dimensions Base (W x H x D) Base weight Max. load capacity Weight |
The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport. Product type Type Tube material Tubing colour Tubing surface Min height Max height Transport length Height adjustment Number of extensions Base material Material of height adjustment Dimensions Base (W x H x D) Base weight Interchangeable rings Black ring pack included Max. load capacity Weight |
Reviews
There are no reviews yet.