PRICE PER UNIT S5X: Main Monitors a notch above Both Versions of the S5X models have been designed for medium and large sized control rooms in which the precision and the power of the sound production are essential. The main task of these monitors is to bring the extraordinary sound quality all ADAM monitors are […]
Both Versions of the S5X models have been designed for medium and large sized control rooms in which the precision and the power of the sound production are essential. The main task of these monitors is to bring the extraordinary sound quality all ADAM monitors are famous for into areas of higher dynamics and higher sound pressure levels.
Drivers
The S5X-H features two 12” HexaCone woofers, a 7.5” HexaCone midwoofer unit, an X-ART midrange and an X-ART tweeter. This combination is capable of filling large control rooms with breathtaking realism and stunning dynamic performance.
Amplifiers
The upper three drivers are each powered by a 250 W discrete PWM amplifier while two 500 W digital amp drive the two 12” woofers.
The X-ART midrange
The most famous and highly acclaimed feature of all ADAM monitors is the proprietary Accelerating Ribbon Technology tweeters. An exclusive feature of the main monitors is the application of this technology to the midrange as well.
In accordance to the X-ART tweeters, also the midrange units now feature the improved X-ART. Compared to their ART predecessors, these midranges show improvements namely in higher efficiencies and higher maximum sound pressure levels.
Subwoofer
Number
2
Basket Ø
12″ (305 mm)
Voice coil Ø
3″ (75 mm)
Cone material
HexaCone
Mid-Woofer
Number
1
Basket Ø
7.5″ (186 mm)
Voice coil Ø
2″ (50 mm)
Cone material
HexaCone
Midrange
Number
1
Type
X-ART
Diaphragm area
26 inch² (16800 mm²)
Equiv. Diaphragm Ø
5.5″ (146 mm)
Velocity transform ratio
3.5:1
Diaphragm weight
0.7 g
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2″ (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Subwoofer
2
Type
PWM
Amp. power RMS / music
500 W / 700 W
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Frequency response
24 Hz – 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥121 dB
Max. peak
≥131 dB
Crossover frequencies
200 / 800 / 4000 Hz
Input impedance
10 KOhm
Weight
139.8 lb (63,4 kg)
Magnetically shielded
No
Height x Width x Depth
27.5″ (700 mm) x 27.5″ (700 mm) x 18.5″ (473 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Weight
65.00 kg
Reviews
There are no reviews yet.
Be the first to review “ADAM S5X-H Active Studio Monitor 500W” Cancel reply
Both Versions of the S5X models have been designed for medium and large sized control rooms in which the precision and the power of the sound production are essential. The main task of these monitors is to bring the extraordinary sound quality all ADAM monitors are famous for into areas of higher dynamics and higher sound pressure levels.
Drivers
The S5X-H features two 12” HexaCone woofers, a 7.5” HexaCone midwoofer unit, an X-ART midrange and an X-ART tweeter. This combination is capable of filling large control rooms with breathtaking realism and stunning dynamic performance.
Amplifiers
The upper three drivers are each powered by a 250 W discrete PWM amplifier while two 500 W digital amp drive the two 12” woofers.
The X-ART midrange
The most famous and highly acclaimed feature of all ADAM monitors is the proprietary Accelerating Ribbon Technology tweeters. An exclusive feature of the main monitors is the application of this technology to the midrange as well.
In accordance to the X-ART tweeters, also the midrange units now feature the improved X-ART. Compared to their ART predecessors, these midranges show improvements namely in higher efficiencies and higher maximum sound pressure levels.
Subwoofer
Number
2
Basket Ø
12" (305 mm)
Voice coil Ø
3" (75 mm)
Cone material
HexaCone
Mid-Woofer
Number
1
Basket Ø
7.5" (186 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Midrange
Number
1
Type
X-ART
Diaphragm area
26 inch² (16800 mm²)
Equiv. Diaphragm Ø
5.5" (146 mm)
Velocity transform ratio
3.5:1
Diaphragm weight
0.7 g
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Subwoofer
2
Type
PWM
Amp. power RMS / music
500 W / 700 W
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Frequency response
24 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥121 dB
Max. peak
≥131 dB
Crossover frequencies
200 / 800 / 4000 Hz
Input impedance
10 KOhm
Weight
139.8 lb (63,4 kg)
Magnetically shielded
No
Height x Width x Depth
27.5" (700 mm) x 27.5" (700 mm) x 18.5" (473 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany
PRICE PER UNIT
S1X
The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.
The smallest reference speaker
The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.
The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.
Woofer
Number
1
Basket Ø
6" (156 mm)
Voice coil Ø
1.5" (37 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
200 W / 280 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
±10 dB
High Shelf EQ > 6 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR
General data
Panel
Rear
Frequency response
40 Hz - 50 kHz
THD > 80 Hz
≤1.5 %
Long term output
≥103 dB
Max. peak
≥113 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
13.2 lb (6 kg)
Magnetically shielded
Optional
Height x Width x Depth
11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.