Content |
Description:
Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.
Applications:
Extremely Low Profile Stage Monitor Arrayable Front of House Enclosure Theater Houses of worship Corporate
Features:
Unique Cabinet Geometry Adamson AX10 Low Frequency Driver 1" High Frequency Compression Driver Passive Operation Adamson Acoustic Waveguide Durable Dual Component Finish Roadworthy Construction
Weight: 22 |
Color Black Input Connections Parallel Neutrik® NL4 Speaker Type Fullrange Frequency Response (-3 dB) 65 - 20000 Hz Frequency Response (-10 dB) 45 - 20000 Hz Internal Crossover Yes Recommended High-Pass Frequency 45 Hz Sensitivity 1 W/1 m 100 dB Max. SPL/1m (calc) 133 dB Coverage (Nominal -6 dB) H° 90 ° Coverage (Nominal -6 dB) V° 50 ° Rotatable Horn No System Power Handling (Continuous/Program/Peak) 500 Watts LF Transducer SMX2151 HF Transducer DH3 Crossover Frequency 1750 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6.2 Ω Enclosure Material Plywood and MDF with EVCOAT Flying No Height 475 mm (18.7“) Width 439 mm (17.28“) Depth 655 mm (25.79“) Weight Net 23.5 kg (51.81 lbs) |
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
PRICE PER UNIT A revolutionary formula: 2 x 7 = 77 In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line. The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring. Driver technology Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels. The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Review samples: “… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012 “… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012 Subwoofer | | Number | 1 / 1 | Basket Ø | 7" (175 mm) / 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) / 1.5" (38 mm) | Cone material | Carbon / rohacell / glass / Carbon / rohacell / glass | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | Location | Rear | General data | | Panel | Front | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥114 dB | Max. peak | ≥122 dB | Crossover frequencies | 400 / 3000 Hz | Input impedance | 30 KOhm | Weight | 28.2 lb (12,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) | Warranty | 5 Years |
| This 15" full-range loudspeaker stands out with impressive sound even at low frequencies. As a jack-of-all-trades, the unpowered ICOA 15 speaker by LD Systems and its design with a coaxial design and rotating, BEM-optimised CD horn means it is extremely flexible.
The horn-loaded woofer's outstanding bass reproduction makes the ICOA 15 the ideal choice for dance schools, musicians, bands and entertainers. It also allows DJs to play sets without the need for a subwoofer. The speaker also makes a good impression in fixed installations due to its freedom of flexibility.
Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. It Delivers a maximum sound pressure level of 125 dB peak and has 1000 Watt peak performance.
Thanks to its shock-resistant front grille and ideal 55° tilt angle make the ICOA 15 outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment. Extensive and smart accessories for installation and transport are optionally available. Four aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
Product type |
PA loudspeaker |
Type |
Passive |
Low/mid driver dimensions |
15 " |
Woofer size |
381 mm |
Woofer magnet |
Ferrite |
Woofer brand |
Custom-made |
Horn |
BEM optimized CD Horn |
HF driver dimensions |
1 " |
HF driver size |
25.4 mm |
HF driver magnet |
Ferrite |
HF driver brand |
Custom-made |
HF driver voice coil |
1.4 " |
HF driver voice coil |
35 mm |
Load rating (RMS) |
250 W |
Dispersion (H x V) |
90° x 50° |
Peak power |
1000 W |
Frequency response |
48 - 20000 Hz |
Crossover frequency |
2000 Hz |
SPL (1W/1m) |
95 dB |
Max. SPL |
125 dB |
Impedance |
8 Ohm(s) |
Loudspeaker inputs |
1 |
Speaker input connections |
Speakon compatible |
Loudspeaker outputs |
1 |
Speaker output connections |
Speakon compatible |
Cabinet material |
Polypropylene |
Cabinet construction |
Bass Reflex |
Mounting |
36mm flange (0°, 5°), 6 x M10 flying points |
Monitor angle |
55 ° |
Width |
416 mm |
Height |
695 mm |
Depth |
415 mm |
Weight |
24,7 kg |
|
Chassis Size 304.8 mm (12“) Color Black Directivity Index 11.6 dB Input Connections 2 four-pin Speakon Speaker Type Two-Way Speaker Type Wedges Frequency Response (-3 dB) 65 - 16000 Hz Frequency Response (-10 dB) 50 - 20000 Hz Internal Crossover No Sensitivity 1 W/1 m 98 dB Max. SPL/1m (calc) 129 dB Coverage (Nominal -6 dB) H° 55 ° Coverage (Nominal -6 dB) V° 80 ° Rotatable Horn No LF Transducer DL12ST Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 8.2/10.5 Ω Enclosure Material 13-ply birch plywood with Futura Flying No Outdoor No Height 584 mm (22.99“) Width 449 mm (17.68“) Depth 313 mm (12.32“) Weight Net 21.9 kg (48.28 lbs) |
Reviews
There are no reviews yet.